Why junk e-mail filter works when I 'junk mail adaptive controls' extinct?

Similar Questions

• Why the operator: = is not working when it is in a string concatenated and assigned to a variable?

  I met with an error ORA-00904: "V_DEPTNO": online: 14 (My PL/SQL code is below), while playing with the cursor of reference (for the end of the apprenticeship).
  I debugged it and the problem was solved and it returns the desired output.  However, the solution of it is not sensible for me even if the output
  has been posted/successfully recovered.    Here's a clearer description of the code:

  
  On line 14, I have a variable called stmt and stmt value concatenated with the string "where deptno =: v_deptno' and then finally assigned to this stmt variable."

  In this line, he returned ORA-00904 but it was fixed by using =: operator instead of the = operator.

   stmt:=stmt || 'where deptno=:v_deptno'; 
  

  In sql pure when it is intended to add where clause for such purpose, the = comparison operator is used.
  Example:

  Select empno,ename,sal from emp where deptno=10;
  

  But in my pl/sql code, =: operator was used.

  Why is this? Can someone explain what it is? Even if I did my research, but I couldn't find the explanation yet.

  All what I've understood so far, is that this may mean the following (I may be wrong):
  1 - everything first, assign the value 10, of v_deptno, who was declared, to easily compare.
  2. compare the value assigned with deptno.
  On this basis, recover data.

  
  Thus, he worked as a = + tour operator defined in another high programming language such as c#... etc.
  Example:

  int a = 0;
  
  a =+ 1;    //  a was declared as an integer that has value 0
          // then  we tried to increment by 1 or add by one
           // so it would be  a=a+1;  
                  //which is  a=0+1;
  

  It works the same?

  Here's my complete code pl/sql, just in case...

  --ref cursor
  declare 
  
  type emp_refcur  is ref cursor;
  emp_cv emp_refcur;
  emprec emp%rowtype;
  stmt varchar2(299):= 'select * from emp';
  v_deptno number:=10;
  
  begin
  
  if v_deptno is null then
    open emp_cv for stmt;
  
  else
    stmt:= stmt || ' where deptno=:v_deptno';
    open emp_cv for stmt using v_deptno;
  end if;
  
  loop
  fetch emp_cv into emprec;
  exit when emp_cv%notfound;
  dbms_output.put_line(emprec.empno||chr(9)||emprec.ename||chr(9)||emprec.deptno);
  end loop;
  close emp_cv;
  end;
  /
  
  
  
  
  
  
  
  

  I would you to explain and share with me something to read or give me some clues.

  Thanks in advance!

  In this line, he returned ORA-00904 but it was fixed by using =: operator instead of the = operator.

  There is no "=:" operator.

  The colon character ': ' is used to define a binding (placeholder) variable in the query string.

  The value of this variable must be passed ("linked") after analysis and run step so that the query is executed correctly. That's what the USING clause in your code.

  Thus, he worked as a = + tour operator defined in another high programming language such as c#... etc.

  Example:

  1. int a = 0;
  2. a = + 1;    one has been declared as an integer that is set to 0
  3. then we tried to increment by 1 or add one
  4. so it would be a = a + 1;
  5. which is a = 0 + 1;

  It works the same?

  No, nothing to do with it.

• Why the tableStyle script not working, when the other two are

  Hi, please can you help and thank you in advance. I'm puzzled. As you can see, I am new to scripting - a glance through the 15 pages on the forum showed me how the news - and I want a workflow in which I put the styles and then use in this case, "appliedTableStyle" to connect to the appropriate table.
  My question is why this style of table script not work and appear in the palette? (when the two scripts below paragraphs and cells are) I tried the doc.tableStyles.add and the doc.tableStyle.add. Please show me where I'm wrong, or a better alternative. Thank you.
  docTest = app.documents.add)
  table_styles (docTest)
  cell_styles (docTest)
  para_styles (docTest)
  function table_styles (doc)
  {
  with (doc)
  {
  //try {doc.tableStyles.add
  try {doc.tableStyle.add
  ({
  name: "tableGLOBAL."
  bodyRegionCellStyle: doc.cellStyles.item ('cellGLOBAL'),
  headerRegionSameAsBodyRegion: true,
  bodyRowCount: 10.
  headerRowCount: 1.
  })
  }
  catch {} (_)
  }
  }
  function cell_styles (doc)
  {
  with (doc)
  {
  try {doc.cellStyles.add
  ({
  name: "cellGLOBAL."
  appliedParagraphStyle: doc.paragraphStyles.item ('paraBodyGLOBAL'),
  topInset: 0,
  leftInset: 0,
  bottomInset: 0,
  rightInset: 0,
  verticalJustification: VerticalJustification.CENTER_ALIGN,
  firstBaselineOffset: FirstBaseline.LEADING_OFFSET,.
    })
  }
    catch (_){}
  }
  }
  function para_styles (doc)
  {
  with (doc)
  {
  try {doc.paragraphStyles.add
  ({
  name: "paraBodyGLOBAL."
  appliedFont: "Arial,"
  firstLineIndent: 0,
  justification: Justification.LEFT_JUSTIFIED,.
  pointSize: "6 pt."
  main: '8 '.
  })
  }
  catch {} (_)
  }
  }

  Your trial... construction of capture hides the real error - during the development of a script, you can not use.

  When I removed it, ID has reported only with the message quite without value

  "Error string: this attribute is not defined for the table styles.

  Source: ts = doc.tableStyles.add({")

  without saying what attribute... Try one by one, I found this particular result: you cannot initialize 'headerRegionSameAsBodyRegion '... Probably because you cannot initialize without a header first, and you don't "do" again because you always initialize the entire style.

  But this workaround works:

  ts = doc.tableStyles.add({
   name: 'tableGLOBAL'
   , bodyRegionCellStyle: doc.cellStyles.item( 'cellGLOBAL' )
   , headerRowCount: 1
   , bodyRowCount: 10
  });
  ts.headerRegionSameAsBodyRegion = true;
  

• Why the hyperlinks do not work when Firefox loads a new web page?

  Today, no reason apparent, and for the first time in the years of using Firefox, I find that when a new page loads I can't select any of the hyperlinks on the page. What happens on 90% or more pages I have access. If I navigate to another application (for example, by using Alt + Tab) and return to Firefox, the hyperlinks will work. But if I select one of them and a new page will load, I'm unable to click on hypertext links back.

  This is manifested by the cursor remaining as an arrow and do not suddenly change hands hyperlinks sharp when you move. It also seems to affect the ability to use the GUI buttons and the minimize/restore/maximize/close buttons in the upper left corner of the title bar. Ribbon menu items, oddly enough, seem to work as usual, except that if I open, say, tools/options, I have to leave Fireox and vice versa, before being able to use the Options window that opens. It also prevents me from selecting other tabs. And I still have problems using the Forum of Support Mozilla's form to post this question.

  I tried Firefox running in safe mode and reinstall the software, all to no effect

  is nothing in particular happened

  You have this problem when running in Firefox SafeMode?
  http://support.Mozilla.com/en-us/KB/safe+mode
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Satellite Pro 105-S9722 - why the touchpad does not work when it is the cover up?

  whenever I hit the touchpad icon to light up the touchpad, it won't work, only when it is off...

  Hello

  I m afraid. I put t understand what you want to make :(
  You want to enable the touchpad or what? Thanks for posting more details

  You can enable and disable the touchpad with FN + F9 key
  If you want to change some settings for the touchpad, so I would recommend getting into the mouse option in the control panel.
  That could be the touchpad properties.
  In the properties, you should be able to find the needed touchpad settings.

• Why my scripts does not work when scheduled in the calendar?

  Hello

  I created scripts to start and stop onedrive using the "Tell" command

  When I plan their schedule they fail to run.  They were created as programs and work if I launch them manually.

  Is there something that I am missing?  Or is there a better way?

  PS: Scripts are the OneDrive to run after hours to prevent it completely hogging my bandwidth to broadband.

  If there is a better way to control the use of bandwidth for OneDrive I would be grateful.

  See you soon

  Memn

  A workflow schedule alarm will not work unless it is attached to a local calendar ("on my Mac"), instead of a network such as iCloud calendar.

• Why Media Player does not work when my webcam is installed?

  Everything has been working great until this evening. When I try to play a song, I get the error message that windows media player has encountered an error - relatives or wbhelp - and when you select web help, I was directed to the My Device Manager, audio video and game controller. Nothing was reported in some way. I uninstalled the camera just for the sake of curiosity, and Media Player started working properly again.
  My camera is Logitech officials Cam Pro software Quick Cam 10. This is the first issue I've had with her. I tried to reinstall and UN-installing several times, but it's the same continued. No Windows Help Update is

  Since I solved my problems of camera by re - install Windows 7. I didn't know what else to do, but it worked in the end. My camera is now installed and working properly.
  The problem I had was caused by a Windows Update... the cam comes with driver disk, but Windows Update offered an update to the "Logicool Quick Cam. I highly recommend that any user of the QUICK CAM PRO 5000 should NOT download the update for Logicool Quick Cam Pro 5000 driver. It was perhaps intended to solve the problems with the original driver, but caused a great diservice to me.
  Sorry that I don't have a less radical solution to offer besides a re - install cost of Win 7. I tried to uninstall the camera and re - install, but who has never worked. Maybe you could try to restore to a point before you tried to install the cam first. I hope this helps.

• Why my wireless keyboard stop working when I put new batteries in? There is no power in the keyboard now.

  What to do when my wireless keyboard will not be running once I put in the new batteries?

  I probably try different batteries in first and be sure that they are installed according to the polarity.

  I'm not trying to be funny, but the power button was depressed, correct?

  Barry

• Why many apps don't work when I reboot in 10.7.5?

  When I start or restart, the same 6 applications automatically load and execute.  How can I stop this so I'm leaving with a clean restart slate?

  See the list of the login in the pane items accounts or users and groups to the system preferences and if you get a prompt to stop asking you if you want to reopen the windows when you connect, clear this option.

  (139005)

• Why do my Wifi stop working when it rains?

  Well it has been works well until it rained today it juice Cant connect now I am using neighbors Wifi they NOT at home and I have no way to contact them... Please tell Me what I can do thank you!

  -Shayy

  Well it has been works well until it rained today it juice Cant connect now I am using neighbors Wifi they NOT at home and I have no way to contact them... Please tell Me what I can do thank you!

  -Shayy

  internet service provider provides you with a wired connection to your router wify? or if your connection is wimax?

  Connections with csu WiMAX is damaged or incorrect/low signal direction can cause problems during its raining... You can contact your service provider if you have a wimax service...

• Why my css does not work when I publish my Web site?

  When I published my site my css nor my photos appear what I am doing wrong?

  With the exception of a subfolder called contactus, nothing in the directory root. For the site of the service, you must have at least one file named index.html or similar in the root directory.

  Take a look at how you have defined the remote site in Site-> Manage Sites.

• Why my scars do not work when I have the correct graphics, everything is gray

  Hey everyone I'm new to after effects and it does not work all is grey on I can not start a new project

  If the menus are dimmed so you probably started the rendering engine and not the soft:

  A Mac Finder:

  

  On a Windows engine, the extension will be exe.

• Why my password does not work when you install AFP?

  I try to install the new Adobe Flash Player and my password does not work, but I can sign my Adobe account. I have reset my password and it still works for the account.

  It isn't... Adobe password, but your operating system password to install the software.

• Event does not work when I have my variable of variable mutual FUND!

  Hello

  I programmed a labview vi to add a field to a list view when a Boolean variable value is changed. I used a case Event (value change event) structure to determine if a variable value is changed, it works when I force the Boolean control with my mouse click, but it does not work when the value of the variable is modified by the mutual FUND. What should I use instead?

  Value change events are based on the interaction of the user (or the same ejection programmatically based on the value property node (signaling).)  It is not based on a control change via a regular, variable property node local, terminal or any other connecito0n programmatic or binding.

  You must simply query the variable and determine when it changes.  In this case, you can then use the node value property (signs) in the case of event fire.

• Why my e-mail default settings when I close

  No matter what setting suggested that I use for the Comacast email, when I close my windows live mail defaults to 25 and 110

  IM using windows 7 and IE 8.  I had no problem with the ssl settings until something happened about 3 weeks ago.

  Why my e-mail default settings when I close

  I think the answer is that nobody knows. You're not the first to have met this strange phenomenon, and I don't know its cause has been found.

  On my own machine, I found that the settings stick if I clicked work offline before changing, and then closed WLMail and waited a few minutes before re-launch (it is always a good idea to close the program after activation or deactivation of SSL). However, this does not seem to work for another user suffers from the same malaise, so YMMV.

  This kind of problem is often associated with the antivirus or other security software that reverses legitimate changes to files and some program parameters. You should check that it is not causing your problem.