Why do my Wifi stop working when it rains?
Well it has been works well until it rained today it juice Cant connect now I am using neighbors Wifi they NOT at home and I have no way to contact them... Please tell Me what I can do thank you!
Well it has been works well until it rained today it juice Cant connect now I am using neighbors Wifi they NOT at home and I have no way to contact them... Please tell Me what I can do thank you!
-Shayy
internet service provider provides you with a wired connection to your router wify? or if your connection is wimax?
Connections with csu WiMAX is damaged or incorrect/low signal direction can cause problems during its raining... You can contact your service provider if you have a wimax service...
Tags: Windows
Similar Questions
-
from one day to the next my phone is suddenly being updated to 9.2.1. Since then my wifi was NOT working period. Have excellent wifi signal and still absolutely nothing. I reset the network settings and nothing works. Never been a problem until this 9.2.1 update
I have the same problem after updating ios 9.2.1
-
What to do when my wireless keyboard will not be running once I put in the new batteries?
I probably try different batteries in first and be sure that they are installed according to the polarity.
I'm not trying to be funny, but the power button was depressed, correct?
Barry
-
Why loadvars stop working when I gave him the field?
Maybe you can understand this one.
When I specify the full url to load vars, including field it stops working when I put the SWF on the server. However if I load the SWF locally it loads the page from the remote server. I find that I must take the domain of the server of the argument to make it work on the server, as follows:
var sendVars = new LoadVars();
var result: LoadVars = new LoadVars();
result.onLoad = function(success:Boolean)
{
_root.dataStr = Success +""+ result;
}
It works when I load the SWF file on my local computer, but not when I put it on my web server:
sendVars.sendAndLoad (" http://myserver.com/myFile", is translated, "POST");
works when I put it on the web server, but not when the SWF file is local (of course):
sendVars.sendAndLoad ("myFile", result, "POST");
No idea what I am doing wrong?Turn off must be a "crossdomain.xml" on your server file to allow access to the files of other sovereign wealth funds. For example:
http://www.Flash-MX.com/crossdomain.XML
Contains:
It is clear to me why this is never mentioned in the docs of loadvars.
-
Windows Movie Maker 6.0 Vista immediately stops working when you try to open.
Hello!
I've been all around the internet trying to solve this problem, but nothing has worked so far. When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:
"Windows Movie Maker has stopped working".
There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.
I tried to open in safe mode, but it still fails to open. I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.
Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed. That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times. Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open. I was able to record some videos. After a few days, my computer day and WMM 6.0 is more open more. I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]
I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker. However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files). I do not think that the file type is causing the crash, but I guess that's always a possibility...
I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place. Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD. I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6. Windows Movie Maker 6.0 is much better, on the rare occasions that it works. Do you think I should use Windows Movie Maker 2.6 now?
Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0. The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention. Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...
-----------------------------------------------------------------
Signature of the problem
Problem event name: BEX
Application name: MOVIEMK.exe
Application version: 6.0.6001.18341
Application timestamp: 4ad5c77d
Fault Module name: StackHash_6f96
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 0378415b
Exception code: c0000005
Exception data: 00000008
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: 6f96
More information 2: 39ee662180b2f2ed5cfc67e5914ae855
Information additional 3:6366
Additional information 4: 8328a225406b340b1b7b5f591aa5688cAdditional information about the problem
Bucket ID: 1197617492-----------------------------------------------------------------
Signature of the problem
Problem event name: APPCRASH
Application name: MOVIEMK.exe
Application version: 6.0.6001.18341
Application timestamp: 4ad5c77d
Fault Module name: StackHash_1703
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000005
Exception offset: 032e41a4
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Information additional 1:1703
More information 2: 2264db07e74365624c50317d7b856ae9
Information additional 3:1344
Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6eAdditional information about the problem
Bucket ID: 1909412930-----------------------------------------------------------------
The "BEX" error happens much more frequently than the "APPCRASH" error In addition, I have Windows Vista home premium installed and a 32-bit operating system. I don't know how to read the problem reports, or if it's all the information you need. I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!
Thank you!
Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"? Other times a reinstallation of the program crash can fix. As you can not do with Movie Maker the next best option is to try the System File Checker.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToHave you tested another user even if you need to create one to do this?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.
See how many unsigned drivers, you have running on your computer. This article will guide you on the instructions, but all you need to do is type sigverif in start run.
How to identify unsigned with sigverif utility in Windows Vista drivers
http://www.WinVistaClub.com/F34.htmlVista Movie Maker DEP Fix
http://www.YouTube.com/watch?v=tkpURM4FFt0In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.
There are a few suggestions that Nero is a problem if you run that at all?
Windows Movie Maker has stopped working
http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
WiFi stop working on my Inspiron 1525 after installing Windows updates
Updates of Windows installed a few days and wifi, stop working. I uninstalled the windows updates since that day, updated the WLAN driver and even updated my BIOS, and nothing seems to solve the problem. He says I'm on local access only, but when I connect to a modem, I have still no internet to diagnose problems. Any help would be great!
If possible, try to connect to a different wireless network and see if you continue to have the problem. If you have other systems that connect to your network that aren't problems check everything their network settings and make sure that there are no differences on your system.
Try the safe mode with networking, (hold the SHIFT key down while clicking on restart and then choose Safe mode with network) once in failure of Windows to see if you can connect.
Check power settings, simultaneously press the windows key and x and select Device Manager, look for the wireless card and double click it, choose the power management tab and delete control "allow the computer to turn off this device to save power" and then try to connect.
Change the power plan to high performance, press the Windows key and the X set button again and choose power options, power management has chosen and select high-performance, plug in the AC adapter and the wireless card test.
Please reply back with the results and if you can what Windows updates has been downloaded.
TB
-
my iphone 5 c screen stops working when I remove the case
my iphone 5 c screen stops working when I remove the case
Delete this case? Please explain what you ask a little more clear.
-
Hi guys,.
Since a few days my wifi stopped working.
If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
I tried different settings too:
I changed the channel, I put 802.11 g on my router, APSD off on the router.
I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
The hardware test detects any failure.
Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
The only way I have is USB tethering with my Nexus 5.
Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
-------------------------------------------------------------------------------------What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?
WAWood,
I took a risk.
I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
I had to switch from Win8.1 to 10, but the Wifi problem is solved!
I'm still guessing that was the problem...Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
In the next few days I'm checking the linux problem (reset deleted primary partition). -
We're both 73 years old so not savvy with laptops, etc.
our wifi stopped working, but he works hard cable
does anyone know what has happened and how we can fix it, please
Hi Joyce,
Let me see if I can help you through this...
The problem lies in the configuration 'power options' in the 'control panel' as some changes simple to do to correct the problem.
I have written instructions as well as provided photos of each step - please see the pictures for a better understanding.
Good,
1. click on the 'Control Panel' then icon in the Control Panel window opens.
2. at the top right of the search window "" view by: category " you will see a small arrow pointing down next to the word 'Category' - click with your mouse as 2 more options will appear in a menu drop-down."
https://drive.Google.com/file/d/0B5B...JTQXNEMUk/view
3. click on the option "large icons" you will then see a lot more features in the control panel are displayed.
https://drive.Google.com/file/d/0B5B...ZGSVB0Zm8/view
4. scroll the words 'Power Options' and click on it that a new window will open.
https://drive.Google.com/file/d/0B5B...pTTmZBTXM/view
5. you will see 2 options here - if not click the drop down arrow in the center of the page to reveal the words - 'Balanced' & 'High Performance '.
https://drive.Google.com/file/d/0B5B...dpVzVHT0U/view
You should see a small circle checked next to the word "Balanced" - you need to change this setting by clicking on the 'High Performance' next option to fix the wifi issue.
Once you have completed these steps: close the window and test your wifi to see if that fixes the problem - if it isn't trying to "Reboot" or "Restart" your laptop and retest the wifi.
Joyce, please report it here in case of problems you may encounter and need assistance.
Also please report back here if this corrects the problem of wifi.Aloha,
DBOBA
-
Portege Z830-10F - WLAN stops working when USB3.0 port is in use
Hello
On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.
The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.
This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.
Port USB 3 itself works very well.
Running windows 8 pro:
* Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
* USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.
The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.
This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.
Does anyone else have this problem?
Is there a way to fix this?
Thank you!
Hello
To be honest, it's the first time I read on this issue.
I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.I assume its hardware fault and cela must be verified by a certified maker Toshiba.
-
Tecra S5 - fingerprint logon stopped working when I chanaged password
I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.
It stopped working when I have chanaged my password.
Fingerprints are associated with the old password.I looked everywhere to find where to change it without success.
Can someone point me in a right direction?
Thanx
Hello
I think you should remove the old prints and need to configure this new.
As far as I know, you can use the new password to connect.
Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.Theoretically, this should work.
-
MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password? or is my mac app stop working when I change the password?
Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?
Hi gkharris!
I know that this issue is frustrating. I'll be happy to help you.
When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers. Please uninstall the printer by following the instructions in the article:
Uninstalling the printer driver (CAPT V3.55)
After uninstalling the driver, please download the latest driver on the Canon USA site. Please click the link below:
http://USA.Canon.com/Cusa/support/consumer
Once you are on the site, enter your model number. Your operating system will be detected automatically. Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.
Finally, save the printer in the print queue by following the instructions in the following article:
Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)
* Although it shows OS X Lion, the instructions are the same.
I hope this information is useful for you. If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
-
my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please
Hello
1 have you made changes to your computer recently?
2 are you able to access the Internet through an Ethernet cable?
I suggest you to follow the steps in the link and check if it helps.
Windows wireless and wired network connection problems
I hope this helps.
Maybe you are looking for
-
If I use the master password to access the sites, all my passwords are encrypted?
I'm new to this approach to security and just trying to verify the level of security.
-
Tecra A8: Fingerprints - 1080 biometric sensor sensor is not calibrated
Hello I recently installed the software (Protector Suite QL) on my laptop Tecra A8. It worked fine for a day! Then I get an error saying ' biometric sensor is not calibrated, please use calibration tool to rememdy it "when I try to enter some impress
-
After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light in
-
getPreferredHeight does not change the height of a LabelField.
Hello I add LabelFields at a screen. I replaced getPreferredWidth and the LabelField getPreferredHeight. GetPreferredHeight however does not change the height of LabelField. getPreferredWidth seems to work very well. I do not use the default vertical
-
Is there a way of filtering of alerts to be send as notifications on Cisco IME 7.1.1
I'm under Cisco IPS Manager Express version 7.1. I wish I could send emails of notfication to specific individuals, but I'm not all alerts to fire as a notification. There are specific alerts that I know not why they are firing and that they cause.