Why laptops running windows vista arbitrarily arrested after the closure of the cover of laptop?

Similar Questions

• H have a computer that runs windows vista Ive had on the line using Xp professional, but it seems that I can't find a compatible driver for the audio card suggestions?

  I have a computer running windows vista that Ive had on the line running on the line with professional Xp but it seems that I can't find a compatible driver for the audio device. Ant suggestions? The Pc has a legacy, it's a Compaq laptop

  Hi morningstar410,
   
  -What is the brand and model of your laptop? Specify the same thing to help us find the right audio driver for you.
  -For which version of the operating system you are looking for the driver?
   
  Visit the following link and check if you download the drivers here:
  http://www.Compaq.com/CPQ-country/cpq_support.html
   

  In the meantime, follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

   
  Keep me updated on the status of the issue.

• Cannot upgrade Windows Vista Ultimate Edition after the HD upgrade

  I have an ASUS computer which is about five years old and works fine. It runs only Windows Vista Ultimate 32-bit SP1.
  The HD has been giving signs which is failing. I bought a new HD and copied the old HD to the biggest news. Everything seems to work fine until I tried to run Windows Update. It does not allow me to update and gives the 8024A 000 error code every time I try to run it. I called ASUS for help and they said
  to contact me Microsoft.

  Thank you

  Harold

  I found the solution to this problem. I went to another Windows help forum. It is to reset the Windows Update program. I tried the one here on the Microsoft site, and it did not work. But I tried this one http://wind8apps.com/windows-update-error-code-8024a000/ and the fist solution worked like a charm. He fixed the update and install issues with Powershell 2.0. After that and a certain number of updates, it's updated, Windows Update will update to the latest version. After this release he went and found many updates, I had to install. So be patient, you're in for a little wait.

  Harold

• Windows Vista not genuine after the moneypak fbi virus

  I use Avast anti virus, it does not catch the virus of the money to the FBI last week. After cleaning it will record is no longer my product. I have the info (I removed the cd key)

  It's a HP machine and I have a key section and recovery cd, but do not want to erase my software.

  Windows Vista (TM) Ultimate Service Pack 2
  Product no.: X 13-04111
  Installed from media 'full packaged product.
  Product ID: 89580-378-5975063-71564 not a match for data CD Key
  CD Key: (I've ignored this output, but I got it)
  Computer name: HPDESKTOPA612
  Registered owner: Mike
  Registered: Hewlett-Packard Company

  When I run the mcdiag and try to copy the results it gives error 0x8007000d

  I'll try to upload a screenshot of the results (or can send to anyone who is interested)

  Here are links to the screenshots of the tool mcdiag.

  display of license

  Windows screen

  Thank you!!

  Hello

  I suggest you to follow the steps and check if it helps.

  Method 1:

  After back with any error that you get when you attempt to activate your Vista software so that we can help you better.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• Running Windows Vista 32 bit: get the "Windows Update_00000646" error code "Windows Udate_dt000".

  For the following updates: KB982308 KB979441, KB982158, KB982135, KB982312, & KB982331

  This has been posted on 6/08...tried manual installation and that no longer works.  Help, please!

  Hi... when I tried the link to error code 646 and tried to change the registry for AppData, I received an error message as follows: "changing error value: error writing the contents of the value."  I copied the percharacter as suggested, but it would not allow me to change it.

• Windows Vista keeps restarting after the installation of updates

  How can this be repaired?  I have not activated the system restore.

  This thread has the fix:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9 If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Can not install the important updates for Microsoft Office ona HP laptop running Windows Vista Home Premium Service Pack 2

  Hello I am running Windows Vista Home on my laptop.  I have windows update set to download and install updates as they come.  I can't get my computer to update update of security for Microsoft Office Excel 2007 (KB973593)
  Update of security for Microsoft Office 2007 System (KB973704)
  or
  Update for Microsoft Office Word 2007 (KB974561)

  I get the error code 646.  I tried to install all three at once, one at a time and let the computer do as I turn it off.  None of them have worked.  Any help would be wonderful.  Thank you for your time.

  AnyaAlex

  You may have missed this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What version of Microsoft Office installed on a laptop running Windows Vista Home Premium (Service Pack2), 32-bit operating system

  What version of Microsoft Office installed on a laptop running Windows Vista Home Premium (Service Pack2), 32-bit operating system

  Thanks in advance

  Hello

  Microsoft Office 2010

  Microsoft Office 365 is for Windows 7 or higher

  Have you tried to use Microsoft Office Online (free)

  http://Office.Microsoft.com/en-us/collaborate-on-Microsoft-Office-documents-spreadsheets-presentations-and-more-online-FX104341235.aspx

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• I have a laptop of logic that is running windows vista, I want to restore it original configuration

  I have a laptop running windows vista logiq, I would like to restore it to factory settings, I can't find if I had any disk when I wore this last year, it contains errors which I can't fix so thought I would restore it back to original settins, can anyone help

  Hi shelaneboon,

  What exactly is the problem that you are facing?

  If you want to restore your laptop to factory settings Windows Vista, then you need to contact the manufacturer of the computer for more support.

  Note: If you you restore the computer back to the factory settings, you will lose all data. Back up your data before you restore your computer to factory settings.

• How can I restore my Acer laptop running windows Vista to the factory specifications?

  I was given an Acer Aspire laptop. It is running Windows Vista with 512 MB memory RAM. It has been used and I want to try to restore it to the factory specifications. How can I do this? I tried system restore and it fails every time.

  Hello

  you have a very low amount of RAM to run Vista

  System Restore should not perform a recovery plant

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Acer is usually press Alt + F10 at startup to start the recovery process or through the Acer eRecovery Management under all programs

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Dell etc recovery disk

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Im running Windows Vista Home premium OS. After you install Itunes, my computer no longer recognizes cd/dvd players.

  How to make the computer recognize cd/dvd players, while itunes is installed

  Hello

  Too many competing products can stretch resources and cause problems. The power below
  be able to get your rear disc with installs it you have in place.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing

  Hello

  Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.

  Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?

  Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.

  Please, any advice on this will be greatly appreciated.

  Alan

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• Analyze the error "C:\Windows\Panther\unattend.xml" after the recovery attempt (computer laptop gateway)

  I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.

  This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required

  "Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?

  NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).

  So yes, this is what he does now.

  It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »

  Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.

  I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.

  Ideas? »

  Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  Above is how the gateway recovery is supposed to work.

  Also, try this:

  Try using a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  To exclude software as the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom