access the definitions of point-set up

Similar Questions

• To access the definitions of TaskFlow

  Is it possible in the code PhaseListener for discover the Taskflow belong (if any) the view and how to access the definition of the taskflow?

  Hello

  ControllerContext.getInstance () .getCurrentViewPort () .getTaskFlowContext () .getTaskFlowId)

  http://download.Oracle.com/docs/CD/E17904_01/apirefs.1111/e10651/Oracle/ADF/controller/ControllerContext.html

  Frank

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• Publish all by accessing the data in the row selected in the table of the ADF...

  Hello
  
  I try to get the data of the selected line in the bean on the change of SelectOneChoice in a column of table of the ADF.
  
  There are two definitions of node in the iterator. When I try to access the data in the row. I see that the first definition of node data.
  How to access the definition data another node?
  
  I'm trying to access the "sponsorId" of the iterator. I use the code below. But his return null pointer exception.
  
  The code I use to access the data in the row:
  
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding = dcItteratorBindings
  bindings.findIteratorBinding ("sponsorIterator");
  ViewObject voTableData = dcItteratorBindings.getViewObject ();
  Line rowSelected = voTableData.getCurrentRow ();
  System.out.println (":" + rowSelected.getAttribute ("sponsorId")); I am able to see the data correctly for sponsorCodeDesc, sponsorPercentage, sponsorStatusDesc
  
  This is the iterator used for the table (page def):
  
  < Tree IterBinding = "sponsorIterator" id = "sponsor1" >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.ConferenceType.Sponsors.Sponsor"
  Name = "sponsor10" >
  < AttrNames >
  < item Value = "sponsorCodeDesc" / >
  < item Value = "sponsorPercentage" / >
  < item Value = lie "sponsorStatusDesc" = "sponsorStatusDesc" / >
  < / AttrNames >
  < accessors >
  < item Value = "sponsorDetails" / >
  < / accessors >
  < / nodeDefinition >
  < nodeDefinition DefName = "org.ieee.internal.ws.proxy.conf.types.SponsorType"
  Name = "sponsor11" >
  < AttrNames >
  < item Value = "sponsorId" / >
  < item Value = "sponsorName" / >
  < item Value = "isIEEE" / >
  < item Value = "isNonProfit" / >
  < item Value = "sponsorAcronym" / >
  < item Value = "sponsorDesc" / >
  < item Value = "sponsorEmail" / >
  < item Value = "sponsorComment" / >
  < item Value = "sponsorTypeId" / >
  < item Value = "sponsorTypeDesc" / >
  < item Value = "sponsorActive" / >
  < item Value = "societyNumber" / >
  < item Value = "businessUnit" / >
  < item Value = "createdBy" / >
  < item Value = "updatedBy" / >
  < / AttrNames >
  < / nodeDefinition >
  < / tree >

  you have not yet a selectionlistener linked to the table... to make the currentrow as the selectedRow...
  Can u please add the selectedRowKeys and the selectionlistener in the table as

  selectedRowKeys = "#{bindings.sponsor1.collectionModel.selectedRow} '"
  selectionListener = "#{bindings.sponsor1.collectionModel.makeCurrent} '"

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• To access the children of VBox

  Hi all

  I have dynmaically created in some CheckBox and added to a VBOX.

  I want to do is create a function that will go through all the and deselect. I got so far:

  private void clearSelection (): void
  {
  for (var i: int = 0; i < campaignRadioButtons.numChildren; i ++) {}
  var tmpCheckBox:CheckBox = new CheckBox
  tmpCheckBox = CheckBox (campaignRadioButtons.getChildAt (i));
  trace (tmpCheckBox.label);
  }
  }

  OK, so at the moment it returns all labels. I want to do is access the 'selection' attrubute and set the value to false. How can I do this?... without having to re add everywhere.

  Thank you

  private void clearSelection (): void
  {

  var n: int = campaignRadioButtons.numChildren;
  for (var i: int = 0; i< n;="">

  {
  var tempCheckBox:CheckBox = CheckBox (campaignRadioButtons.getChildAt (i));
  tempCheckBox.selected = false;
  }
  }

  Note: Do not

  private void clearSelection (): void

  {

  var n: int = campaignRadioButtons.numChildren;
  for (var i: int = 0; i< n;="">

  {
  var tempCheckBox:CheckBox = new CheckBox();

  tempCheckBox = CheckBox (campaignRadioButtons.getChildAt (i));

  tempCheckBox.selected = false;

  }

  }

  Unnecessarily, it creates new n box instances and frees when the reference to the i - th new checkbox in tempCheckBox is crushed with the reference to the existing ith check box.

  Gordon Smith

  Adobe Flex SDK team

• WNR2020 - setting up the Web page that appears when you can access the guest network

  Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.

  It can be done by using a different material.

  Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.

  You can check some Points of access such as WAC720, WAC730.

• How to access the handle through its pointer

  Hi all

  I have a problem regarding the use of the handle and the pointer. I try to use an external DLL library in Labview. In this DLL library, there are two functions, we're like:

  int32_t xChannelOpen (CIFXHANDLE hDriver, char * szBoard, uint32_t ulChannel, CIFXHANDLE * phChannel);

  and the other is

  int32_t xChannelClose (CIFXHANDLE hChannel),

  where this 'phChannel' is a pointer to a CIFXhandle "hChannel". Now, I want to highlight this handle 'hChannel' 'phChannel '. I think that's hard to do in C, but how could I do in Labview? Is there a method that accesses the handle of his pointer? I appreciate this very much for any advice.

  Thank you very much.

  Best regards

  Sun

  You don't need any special function for this. You must configure the call to the library function node call correctly. When you call xChannelOpen, you must configure the parameter phChannel as an integer pointer passed by pointer value. The value that will be returned in this parameter is the value of hChannel. When you call xChannelClose, passing the same value (the same thread), but this time set it up as an integer of size pointer passed by value.

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to dynamically access the SQLite result set?

  I want to dynamically access the SQLite result set. Since webworks does not support the "PRAGMA table_info (table_name); I save all newly created information tables in a single two-column table called schema. schema has two columns, table_name, and column_name.

  So I created a function to dynamically access the data in the table. I use the item = results.rows.item (i) and that the data access with item.column line.

  column is a variable that will receive the value of a schema representative of column_name. When I alert (column) I get the column_name is correct, but when I used item.column my results are "not defined".

  any advice on how to solve this issue.

  I managed to solve this issue. The solution is the following: the normal way to access the data of the variable item = results.rows.item (i) is item.column (where the column is the name of the column in the database table. To access the data dynamically, I Specifies a var col1 to assign different values in col1. I then access the data in the database using point [col1] hope that makes sense. If you need a further explanation contact me at [email protected]

• is there a way to restrict access to the settings of the iphone ios 9.2... More specifically, the parties that allow set up passwords strengthened.

  I need to block access to the part of settings that allows adjustment of the codes on the phone. Is there a way to block this access?

  Only by setting up a password for yourself.   Implementation of an authentication request of said code access code to change.

• How to access the Bios setting?

  Anyone know how to access the Bios definition please?

  Thanks in advance for your help.

  Hello

  First of all, it would be very interesting to know what unit you have.
  Generally, it should be possible to get into the BIOS by pressing ESC then F1.
  Try it.

  Good bye

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  original title: alternate tcp/ip

  If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

  The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

  Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

  If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• "the procedure entry point SetDllDirectoryw" when you access internet, mistake after repair installation

  I have WinXP Pro and this morning when I turn on the computer, I received a msg of error that a file was missing or corrupted, if I put the original disc in WindowXP Pro in the computer and it said to fix. Once this has been done it starts up fine, but when I trid to access the interernet I received the following: "the point procedure entry SetDllDirectoryw be found in KERNEL32.dll dynamic link library."

  I use a wireless connection, and it shows a great connection. No service don't packs again until what I connect.

  Any help?

  Hello

  1. how exactly you are trying to access the internet?
  2. what browser do you use?

  Run SFC scans the computer and check.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true