Why my computer "freezes" when you try to add an item to the cart in the Amazon?

Similar Questions

• computer freeze when you try to watch a video stream (only) from any Web site

  When I try to watch streaming video, my computer freezes, the screen goes black. It will start to play the video to say about... maybe 30 seconds. The computer screen will sweep for a fraction of a second and that's it. It crashes, the screen goes black, it makes that sound you get when the computer crashes. So I have to do a hard reboot to take control of the computer again. I've only had this computer for about 120 days, did not buy good warranty for the software and now I'm stuck.
  I got a warning of "problem-solution" and he mentioned a question with the ATI card. I have ATI Mobility Radeon HD 5470 on an Inspiron7010. I tried to reload the OS. did not work.
  What can I do to fix this?

  Hello

  If you have tried the steps listed in this thread but still have a problem, please repost this as a new question to the address provided below. Provide any other information system and errors.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• E5 - 573G laptop 56RG breaks down when you try to play a game with the Nvidia GeForce 940 M processor.

  Whenever I try to play a game using the Nvidia card on the laptop Aspire E5 56RG - 573 G computer goes to a blue screen and gives the error "Video_Schedular_Internal_error" before restarting.

  All the games that I tried to run by using the processor 940 m 7200LE crashed the PC.

  Minecraft, Star Trek Online, dungeons and Dragons Online and Neverwinter all crash as soon as the game is loading all the graphics. All the games work very well using the processor 5500 on-board Intel HD graphics but way less detailed than the 940 m from Nvidia is capable of.

  I've updated to the latest Nvidia drivers twice now (Oct and Nov references) with the help of installs clean. I also tried the Nvidia driver on the support page from Acer for the serial number of this PC. I've updated to the last update of the bios on the page of Support as well. Again, the PC crashes when you try to play a game using the Nvidia graphics processor.

  My operating system is windows 10.

  Most of the error information I could find said it is a driver problem or I have a faulty video card. Any suggestion or help would be appreciated.

  Cerealkiddo on Nvidia forums has found a real solution to the problem.

  1. download MSI Afterburner.

  2. change the base to-13 clock and clock from memory to-15.

  3. save in a profile and apply the changes.

  Make sure you only keep afterburner running everything at stake.

  Source:

  https://forums.GeForce.com/default/topic/901903/GeForce-mobile-GPUs/940m-BSOD-issues-w-Optimus-on-Wi...

  This is Underclocks not GPU slightly and stops the BSOD hangs.

  I played Skyrim for about 4 hours now maxed out graphic with map selected Nvidia and he collapsed once, while before this fix, it would break the pc after 2 minutes of play on any parameter using the nvidia card.

  Keep Afterburner running everything at stake. I turned it off to test and games went immediately to crashing after a few minutes of play. He turned back and was able to play games once again without any problems.

• When you try to open a file of the photo to view the photo, it will automatically to the hp print model

  Original title: hpc309A printer

  In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template.  It's so frustrating when I want only to view the photo.  Help, please!

  Hi MonroeBroadway,

  Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.

  Change the programs that Windows uses by default

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  I hope this helps. Let us know if you need help with Windows.

• Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

  Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

  You have two options:

  • Perform the action under high administrator privileges.
  • Turn off UAC (not recommended).

  Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Original title: error message

  When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Hello

  ·         What web browser do you use?

  ·         Would which site you find?

  ·         The issue is that with Yahoo search?

  ·         Exactly how you try to search? Web site or toolbar in Internet explorer?

  You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  The following article is maybe worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Failure to solve the problem... and if you
  are comfortable editing the registry... it
  may be worth a try to remove the following text
  Registry keys:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmp.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmploc.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\\wmplayer.exe

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.