Why my CS Design Standard 5.5 disc will not load so I can get the installation instructions?

Similar Questions

• disc will not load or not going to classes

  disc will not load or going to class in a mini

  What do you mean by "does not load?

  Y at - it a disc stuck in the player? We must look carefully into the slot.

  What model Mac?

  The optical drive in my 2009 Mini failed about three years ago.

  See also:

  Get help with the SuperDrive slot on your Mac - Apple Support loading

• Inspiron 1525 / Windows Vista replaced but disc will not load the drivers

  Inspiron 1525 (6/2008) hard drive failed.    Bought a Western Digital spare hard drive 500G (WD Blue) SATA III 5400 RPM.   (NOTE: this is the 2nd replacement hard drive because I bought the 1525... the first time I replaced the hard drive, everything worked as it should.) Original hard drive was a Seagate).

  Replacement hard drive installation is installed it will not load the Vista OS from the disk to the operating system (which came with the laptop) because it does not recognize the driver for the hard disk.

  I tried downloading the latest drivers from the Dell site, but which did not work or the other.

  As I said, the previous hard drive replacement (an another western digital) works perfectly when I reinstalled the Vista operating system in 2010.

  Any ideas?

  Thank you...

  Thanks for the detailed instructions.   I tried everything, but it didn't work.

  Then I read about someone trying to install the same on an Inspiron 1545 hard drive and need to adjust the drive to align with the connectors using paper and another person was using the foil which made me realize that it was a problem of 'size' or 'worthy '. I then decided to open the laptop and manually set the new drive in place and everything works now. (Dell 1525 has a side load drive holder therefore had to open to make this setting correctly).  The player on the 1525 is 9.5 mm thick, but the new disc is 7 mm... even though the sales page for this player said he would fit a 9.5 mm slot.

  Everything is good now.

• The installer disc will not load?

  When I insert the installation disc in my iMac, it stays (no load) for 10-15 seconds, then auto-éjecte. The first time this happened, I assumed it was a bad drive and got a replacement. However, it happens with the replacement drive as well. I installed other software by disk successfully, recently, including an upgrade to Photoshop and does not know why the computer keeps rejecting Lightroom.

  I tried to reboot in safe boot mode and same thing.

  Any ideas how to get my computer accepts the CD so I can install the program? Thank you!

  Write the truth wrote:

  The trial version is not the full version. I know I downloaded it yesterday and it is 67MB. The full version is 198MB and I know because I planned to buy it after trying the demo version of LR 2. This was also confirmed by a salesperson at Adobe.

  Danis has it right. The trial is the full version. Try to delete the prefs file. pointers to it are in the FAQ. See resolve system errors or freezes in Photoshop Lightroom and Photoshop Lightroom 'Préférences' and ' database/catalogue'?.

  Don

• Installation of Windows Vista disc will not re - install. "files required for installation are not available" error 0x8007045D code

  My computer is slow, so I decided to format the C drive and re - install Vista with the installation disc. I did it once before and it worked. This time, however, I tried to install it and once he got to the 'Copy files' section and "Expanding files" error message came up saying: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D

  I tried to restart the computer, and restart the installation, but nothing does.

  I need your help please!

  It's an IO error.  Try to wipe the dvd with a soft cloth and then try again.  The drive itself may also need cleaning.

• Why dose my window have a gap and will not drag down or up to the screen adjustment?

  my window has a gap, that departure is at the bottom, but there is a gap and I can't drag it to get it to connect. And when I try to get the mouse to go to the

  First, I have a very difficult time for the mouse it my mouse bounces up and down. And the dose of window left adjustment right upstairs downstairs.
  I'm going nuts help me please thanks Aja'

  Hello

  Were there any changes made to your computer before this problem?

  To change the display settings, you can try the following steps.

  Method 1:

  Graphics card:
  
  You can uninstall and reinstall the graphics card. To do
   
  1. click on start and then run.
   
  2 type devmgmt.msc, and then press ENTER.
   
  3. the Device Manager will open and you will see graphics card listed.
   
  4. right click on the graphics card and click on uninstall.
   
  5 restart the computer.

  Method 2:
   
  See the link below.

  How to change the appearance of items on the desktop in Windows XP
   
  http://support.Microsoft.com/kb/310543

  Method 3:

  You can also download and install the latest drivers for your site of manufacturers of computer or on the web site of display adapter manufacturers.

  Method 4:
   
  You can try to restore your computer to an earlier point in time when it was working fine. To do this, you can follow the article below:
   
  http://support.Microsoft.com/kb/306084
   
  Please read the article before proceeding with the restoration of the system.

  Hope this information is useful.

• Disc will not load

  I try to install Lightroom - new copy on a Mac.  It is fully compliant with the requirements of the system.

  How can I get a replacement disk?

  If it's 5 Lightroom then just download a copy of the last LR5.2 on the Adobe site.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5647

  Enter your serial number to license on your computer.

• CS 5.5 installation disc does not load?

  CS 5.5 installation disc does not load, is the installation until the second disc, then it will not recognize the disc is in the drive. The disc is completely unblemished. Why it will not continue with the installation?

  I use cs 5.5 because that's what I have a serial number. Thank you

  Copy two disks contents into a directory on your desktop and click on Configuration.

• Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

  Qosmio F750 - 12 p
  BD - RW Pioneer BDR-TD04A
  Windows 7 Home Premium

  Problem: Bluray discs will not play. CD will play.

  History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

  What works the device currently is a 2006 (?) Microsoft driver.

  Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

  Update:

  The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

  - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

  -The Wifi does not work ("network controller driver is bad / missing")

  - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

  It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

  The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

• I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro Service Pack1 necessary

  I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro service pack 1 cd needed someone had this problem and managed to solve it thanks a lot

  Hello

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem you are facing problems with reinstalling Windows XP Professional, and you are to be invited to insert the Service Pack 1 drive to complete the installation.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall Windows XP Service Pack 1 prior to reinstalling Windows XP?

  2. what was the installed Service Pack earlier?

  You may need to uninstall Windows XP Service Pack 1 first and then perform the reinstallation of Windows XP and to check if the installation goes smoothly.

  Please see the following articles for more information about uninstalling Windows XP Service Pack 1:

  How to manually remove Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329015

   

  How to remove folders from Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329260?WA=wsignin1.0

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• I get a message that my system will not load Windows 8 Preview Release. Why?

  My computer is a Dell... It has 2.40 Ghz processor and 1 Gig of Ram... But it tells me my computer will not load Windows 8... Why?

  Can anyone explain that?

  Yes, your CPU or the motherboard doesn't have the ability to run hardware D.E.P., so there is no chance of running the Preview Release of 8-all somehow.

  There is the possibility to set the nx or xd bit in the bios and the cpu to support it as well.

  TBC: Run CPU - Z and say please use the exact model (details) of the processor, it says you have.

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• serious discs will not play on the cd player or car drive?

  When I burned a cd of music with windows media player, the disc will not play on my cd player or car player! Help!

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/burned-CDs-will-not-play-in-CD-player/48cecc76-0A15-4c16-952d-f388244387f9

  See the response by Diana d.

  Tom Ferguson

• Can someone tell me where I can get the recovery disc Vista HB UK version for Netbook HP 2140?

  Hello

  Can someone tell me where I can get the recovery disc Vista HB UK version for Netbook HP 2140?

  My HD became corrupted and if the recovery partition so I need to start from scratch.

  I don't seem to be able to get help online HP as all applications by email through to US and they can't help me.

  I hope someone out there can help please!

  Thank you very much

  Mike7P

  Wow!

  Sorry, you've got such clothing. I thought it was a professional laptop.

  That's what the site directed me to.

  If you know the number located on the sticker as well as the serial number of your product, you can order a set of discs of recovery on the link below by entering your product number there.

  http://www.best2serve.com/page/rcd_landing

  Also, I just discovered yesterday, if you can read your 25-character product key MS, you can do your own Windows Vista installation disc.  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  After you install vista successfully, you can download the drivers you need your laptop support and driver page.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3872996&lang=en&cc=us&TaskID=135&prodTypeId=321957&prodSeriesId=3872994

  Best regards

  Paul

• in windows movie maker, I made a film, but the disc will not play music, he worked before

  in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do

  Hi Authorsz18,

  You are able to hear the music in the preview?

  Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
  1. right click on the audio clip > volume
  2 adjust the volume with the cursor.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.