Why my EXIF data is not updated in my photo library?

Similar Questions

• How migrations (El Capitan) not come to the photo library?

  Hello

  I want to use the Migration Wizard to move my user account for my MacMini BUT put the photo library on a separate hard disk from the system drive.

  My MacMini has two internal drives, the library is huge.

  The MacBook (early 2008 - running Snow Leopard) old a MacMini (late 2009 - El Capitan cool running).

  How migrations (El Capitan) not come to the photo library? It seems to only be set for the entire account.

  If I do this, put the library on a separate disk. How to use Time Machine to back up the library?

  The separate HARD disk transfer photo library, and then delete the disk that you are migrating.

  Time Machine backup disks all connected, unless you put them in the list of exclusions.

• IPhone 5 C Date and not updated

  Hi, after the last update IOS 9.2 I foud on this date and time are no longer works. Even I set automatic or manual configuration.

  Is this a bug? Is this a hardware problem?

  Please, I beg you. someone who can help me?

  Concerning

  Hey IP5c,

  Welcome to Apple Support communities.

  Information and troubleshooting in the article below should help you to solve the problem with the date and time, do not update correctly on your iPhone 5 c.

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  See you soon.

• System-jazn-"Data.xml" not updated after deployment

  Hi all

  When I deploy my application of Portal WebCenter system jazn-"Data.xml" is not updated with the changing demand of jazn in my.

  any idea?

  It's ok now,

  in fact, my jazn-"Data.xml" located in my WebCenter application was corrupt.

  I generate a new and it wrks now.

  Thank you

• Photos on macOS Sierra: Album of peoples does not synchronize with iCloud photo library

  Using Photos has just been updated for Sierra, and we finally have it in writing:

  https://help.Apple.com/photos/Mac/1.2/?lang=en#/phtf5e48489c

  Note: Persons identified in the album people are not synchronized between devices.

  And as far as I know, it really does not synchronize between my libraries of Photos on the MacBook Pro and my iMac.

  It's different in the 10 user guide iOS for the iPhone and iPad:

  http://help.Apple.com/iPhone/10/#/iph9c7ee918c

  People are synchronized between devices where you are connected with the same Apple ID.

  I wonder how this is supposed to work, if a Mac and iPhone are synchronized with iCloud User Library.

  None of the faces that I named on my iPhone did sync it with my Mac.

  Another indication that the lack of synchronization of the people and names is deliberate:

  This document has now also been updated:

  Use iCloud photo library on several Mac - Apple Support computers and Photos

  https://support.Apple.com/en-us/HT204486

  After have connected you, these items appear in the Photos app on all your Mac computers:

  • All photos and original videos
  • All folders and albums
  • Smart albums
  • Keywords
  • Memories
  • Key photo selections

  He used to say, tags searchable faces will perform synchronization between devices, but the tags are more is mentioned. Now we have the 'memories' instead.

• El Capitan 10.11.2 updated and inaccessible photo library

  I've seen questions similar to this one, but none quite match. Photos worked El Capitan. But after the update to El Capitan 10.11.2, I can't pictures to locate the library system, although it is still visible in my pictures folder. (I have several bookstores, how I manage with PowerPhotos). I use an iMac late 2009.

  When I opened the Photos, I get this message:

  

  Sometimes this message at the same time:

  

  I can't choose ', open ' because I can't do this active window or get the buttons to act; I have to select "Exit" in the window "unexpected error".

  I tried to press the Option key when opening the pictures; same result.

  Also, I've used my photo library system for my desktop and screen saver. After update, the office always displays photos of the library. In the system, under the screen saver preferences, the 'Source' menu does not include Photos. I tried to select "Choose a folder", then selecting different libraries of Photos, but it does not work. In desktop preferences, there is a similar lack of power to choose to use a library of Photos, but he continued to use the one I had chosen before the update.

  As I said, I still see libraries in [user name] / photos. This includes the system library I was using before the update (and which is apparently still used for office). They all have a normal appearance in Finder, including update, size, showing as a number of GB, etc.. In PowerPhotos, however, the library system shows as having zero points. Other libraries appear as normal in PowerPhotos, but PowerPhotos does not seem to have a function allowing you to switch which deals with pictures of libraries such as the library system. Trying to open a library other that the library system in Photos, either by PowerPhotos or from the Finder, generates the same error messages above. (The same with trying to open the library system from the Finder).

  I don't know what version of El Capitan I was running before the upgrade. I always installed updates to OS x I use as soon as the alert informs you that one was available.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try from there.  If you succeed, reboot normally and try again.

  

• Faces of Mac OS Sierra an iOS not synchronized on icloud photo library

  You also have this problem?

  Hello alfo91,
  Thank you for using communities of Apple Support.

  If I understand your message that faces on Mac OS Sierra are not synchronized to your device iOS with iCloud photo library. Some features in Photos on macOS Sierra are available only on the Mac, they were created on. These items are listed in the article below:

  Use iCloud photo library on several Mac computers and Photos
  
  

  These items are available only on the Mac where you created the:

  • Books, cards and calendars
  • Slideshows
  • Keyword shortcuts
  • Unused keywords
  • Last album imported (this album contains photos you have imported recently on a specific Mac)
  • Names and faces in the album of the people

  Best regards.

• System not on the iCloud photo library?

  Can I can put a photo library independent of the system on the disk to iCloud and therefore have access to it from multiple macs?

  If you put a photo library on iCloud drive and access it from another Mac synchronization between devices may corrupt the library. I've tested this with a few small test libraries, and none of them survived to synchronization, once I opened new during on iCloud drive.

  I would not risk with important photos.

• Why is the app store not update/download apps

  It has been more than a week.  I have 35 applications that need to be updates and new applications I want to achieve... downloaded and the app store is dead... just dead and useless.  I did research on the issue and none of the solutions I've scratched the work.  How Apple let this just drag?

  In addition, I feel like that has happened, my battery seems to be draining much faster than usual.  I can't help but speculate that something is happening in the background of this phone and it's associated software.

  If my version 9.2 is not the most recent, then my phone is not letting me check for later version software (an error pops up when checking for software updates in the settings... this small wheel just guard spinning that appears an error message).

  If this continues, I'll have to bring my phone and I am seriously considering to return to Android.  I'm frustrated to say the least... and is preparing to launch this gigantic brick of a phone off the Bay Bridge.  Help!

  Hey Ssimon311,

  I understand perfectly that you think your iPhone does not like you would expect! Don't worry, I'd be more that happy to help you troubleshoot I hope that your problems you're having with your iPhone. We follow these steps to see if they will help you with problems you encounter. After each step, try to see if they fix your problems.

  • Update to the latest version of your iOS device.
    • Try to update your wireless or with iTunes iOS device before continuing to try the other troubleshooting steps below to make sure that we are able to solve the problems properly your iOS device. If you need help, update your iOS device, please see this Apple support article: updating software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Troubleshooting steps to try to solve the problems of updating and installation of applications.
    • Make sure you run the latest version of iOS.
      • To determine if you are running the latest version of iOS please open settings > tap general > press "Software Update."
        • If your iOS device is up-to-date, you will get a message saying "your software is up-to-date."
    • Then reset your network settings
      • Open settings > tap general > press Reset > tap reset network settings
        • If you are prompted to enter a password, enter it now, and then follow the instructions on the screen.
    • Now try to connect to iTunes and App Store
      • Please see this article from Apple technical support for assistance in signing off iTunes and App Store: Apple on your iPhone, iPad or iPod touch - Apple Support login with another ID.
    • Then disconnect to iCloud
      • If you need assistance signing in iCloud, you'll want to see the article as well as the previous help on signature of iCloud: log on with another Apple ID on your iPhone, iPad or iPod touch - Apple Support
  • Troubleshooting steps to help you with the battery on your iPhone.
    • Try restarting your iOS device
      • Press and hold the sleep/wake button
      • Drag the slider to turn off your device completely.
      • Once the unit is off, press and hold the sleep/wake button until you see the Apple logo.
    • Apple provides some tips to help you get the most out of your iPhone battery that you can find here: http://www.apple.com/batteries/maximizing-performance/
    • If you want anyway, you can configure a Genius Bar appointment for them to check the status of your iPhone's battery.
      • Set up an appointment at the Genius Bar:
        • http://www.Apple.com/retail/Geniusbar/
      • IPhone battery and repair costs:
        • https://www.Apple.com/support/iPhone/repair/battery-power/
    • Mode low power
      • Open settings > scroll down and choose the battery > turn lower on power Mode on/off.

  I hope I could help you. If you have any questions, feel free to ask I would be more than happy to help! I have an iPhone too and I don't appreciate it as much when it does not work properly either, so I completely understand how you feel. The great thing is that communities Support Apple is here all the time with people who are all here to get help, or help others. Then stop again if you need more information, right?

  -Good luck,

  John

• Why the acquired data are not from min to max (DAQmxCreateAIVoltageChan, PXI-4472) values

  Hello

  I'm developing a program for the PXI-4472 acquisition on opensuse 11.4 device (linux 2.6.34).

  I try to acquire analog data and to read in a wav file.

  Configure the task of acquisition with the following functions:

  DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","OnboardClock",DAQmx_Val_Cfg_Default,-10.0f,10.0f,DAQmx_Val_Volts,NULL);
  DAQmxCfgSampClkTiming(taskHandle,"",48000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,48000);

  DAQmxDisableStartTrig (taskHandle);

  I don't understand why the data stored in the wav file are not-10V,-10V but-5V, 5V... (the value of the gain is 0dB). (Perhaps a scale of 0.5?...)

  Thanks for your help,

  Amandine

  You're right, in my example, I considered as unsigned data.

  Concerning

• time and date do not update automatically

  So I installed windows 8, there is not that long and I notice that my time still stuck after some time and I have to re - sync all the time. This gets really annoying. What can I do to fix this?

  Hi GadyBarak,

  Thanks for posting your question in the Microsoft community forum!
   
  Here are some steps that you can follow
  Method 1:
  Check the status of service time Windows.
  a. the office window, press windows + R
  b. type services.msc in the run window.
  (c) in the services window find 'windows time' and double-click it.
  d. If the service status is stopped, click Start, and then press ok.
   
  Method 2:
  Check if the date and the time zone is set correctly
   
  Try to restart the time service windows and check
  a. click on display time and date in the lower right corner.
  b. Select the internet time tab, and click on change settings and click Update now and press ok.
   
  Method 3:
  Check if the time is set in the Bios from the manual of the computer.

  If you are not comfortable to go to the Woods, contact the manufacturer of the computer

  If you still have questions, contact the manufactutrer from the computer and get the cmos, battery check.

   

  Note: changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  Hope this solves the problem. You can write back us if the problem persists and we will be happy to help you.

   

   

   

   

• User_sub_partitions data dictionary not updated after you rename the partition but user_tab_partitions is

  Hello

  Using oracle 11.2.0.3

  Date range poartitioned 1 partition for each month and 4 separate secondary partitions for each month.

  and executed suite

  ALTER table retailer_transaction rename partition SYS_P64937 tablespace PART_201505;

  ALTER table move subpartition SYS_SUBP64933 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64934 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64935 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64936 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table retailer_transaction change the default attributes for the partition PART201505 tablespace RTRN_PART_201505;

  Check user_tab_partitions and now to see nom_partition like PART_201505 but when check user_tab_subpartitions

  a still 4 secondary partitions with a score of SYS_P64937 name

  Why is this and how do you ensure user_sub_partitions corresponds to user_tab_partitions?

  Thank you

  user5716448 wrote:

  Thanks for the reply.

  Œuvres by renaming the index partition as suggested.

  However, one last problem to try to rebuild the local bitmap index that is marked as UNUSABLE for the affected partition is ORA-14287 cannot rebuild a partition of a composite range partitioned index.

  ALTER index RTRN_SAS_IDX PART_201505 rebuild partition;

  How we can rebuild the local bitmap index to ensure it can be used - would not want to delete the local bitmap index and rebuild?

  Thank you

  [oracle@localhost ~] $14287 oerr ora

  14287, 00000, "can not REBUILD a partition of a Composite range partitioned index.

  * Cause: The user attempted to rebuild a partition of a Composite range partitioned index

  which is illegal

  * Action: REBUILD the index partition, a subpartition at a time

• Back to Smartphones blackBerry to date is not updated

  I use BB9000 and BB Desktop Software (6.0.0.12 BB Device Manager), in Dutch.

  After a backup the date indicated under the last backup maitains the same thing, that is September 9, which is the date of my first update after installing this version. What can I do to fix this?

  BTW, 'last synchronization date' will update itself correctly.

  Karim

  I found a solution in this thread

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/last-backup-date-doesn-t-change/m...

• Data is not updated using data Load Wizard

  Hello
  
  I use
  Oracle XE 11 DB
  Apex 4.1
  
  I created an Assistant load data on a 'Price list' table with structure as below
  Identification number
  number of vid
  ItemId number
  number of prizes
  
  When I try to enter data with the same pair of vid and itemid, he doesn't do an insert on the table instead of update while it displays update also lines in this next tutorial
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/Apex/R41/dataLoad/dataLoad.htm
  
  I need to be able to update the prices every time I download the same pair of vid and itemid. Any help would be much appreciated.
  
  Thank you
  Saurabh Jain

  Hi Slim,

  Download data update process is based on unique columns that you defined. If the unique columns are different from your primary columns, the final results will be based on the unique column values. If you you columns redefine and ensure you submit two copies that according to what I have just explained above, you should be able to see the "updated columns".

  Kind regards
  Patrick

• Data are not updated in OBI until execution of the counts of line update

  Hello:
  
  When the data are updated in my data source (SQL Server 2000) it doesn´t updating of dashboards and responses until I run the update to line against my physical table.
  
  This is the first time this has happened. Someone had the same problem? How do you solve it?
  
  
  Best regards

  Use that dirty read option to read uncommitted data, check whether the database is engaged after the new ETL updated...