Why my movie maker won't publish my videos?

Similar Questions

• Windows Movie Maker will not publish my videos properly!

  Hey guys. anyway I publish a video Director and 15 Minute long play through it fine, but after its publication, and I watch the video file it freezes at the same image (the media player does not freeze, he continues to play through, the video comes out badly) and all the audio stops and then the screen blacks on entirely for the rest of the video. Does anyone have a solution to this? I'd appreciate any help. Thank you

  Hi, Mike Vargas27,.

  (1) did you try to post another file to check if the problem is with this particular file or to do it with Windows Movie Maker?
  (2) what is the format of the file, which you try to publish a movie?
  (3) remember you to make changes to the computer before the question?
   
  Refer to the below mentioned method and check if it helps.
  Movie Maker 2 stops responding when you try to save a large movie file
  http://support.Microsoft.com/kb/814836
   
  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Note: The link above also applies to Windows XP.
   
  For reference:
  Formats supported by Windows Movie Maker in Windows XP file
  http://support.Microsoft.com/kb/308464
   
  FIX: Windows Movie Maker crashes when you install more than 100 video transitions or video effects on a computer that is running Windows XP
  http://support.Microsoft.com/kb/969395
   
  Hope this information helps.

• My Windows Movie Maker will not publish my video! Help!

  Whenever I try and publish my video, about 19% through, it will say "Windows Movie Maker cannot save the movie to the specified location. "Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space and then try again .

  I tried everything that I could find-unchecking filters, reset, settings, shorten, taking the effects, transitions, and even download free audio and put it back later. Please help , I spent all day on this video.

  It is 4 minutes and 18,62 megabytes.

  Thanks for your help, but they are already all WMV format.

  ====================================
  Still may be worth a try... convert wmv WMV.
  This will create a new version of the file that would work. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Vista Movie Maker won't let me publish

  Hello.

  I try to publish a video I worked so long on and when I get to 40%
  It stops and it says: Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again.
  I have enough free space: 118GB
  The video is 1920 x 1080
  And it takes about 2 min.
  I'm very angry they may not make a program that WORKS!

  Hi Eddynstain,

  See the suggestion of:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/Windows-Movie-Maker-WMM-cannot-publish-video/859955f8-382a-42f2-A4C4-58fb99b1f205
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/cannot-publish-a-movie-in-MovieMaker/630ec718-849e-4A28-b2b6-dcde5fca7b5d

• my windows Movie Maker won't open the project that I saved. It is said that the program was narrow incorrectly

  original title: Director of windows

  my windows Movie Maker won't open the project that I saved. It is said that the program was narrow, badly what I can do to fix this?

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Movie Maker is not publish a 10 minute film.

  It is not a long film, it is only ten minutes long. There are MOV and MPG files. I tried a DVD publishing and that no longer works. It still load to a certain percentage, but then it just stops. What should I do?
  original title: my movie on Windows Movie Maker is not published.

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Live Movie Maker that works in Vista and Windows 7
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Official Support of responses - Movie Maker Forums site-
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I use Vista, Windows Movie Maker. Problem publishing movies on computer.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  ===========================================
  More than likely you are using one or more incompatible source files...
  or the project may be too complex for your system resources.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Might be worth trying to convert your video files in .wmv format
  before you import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Live Movie Maker transformed my 16:9 video automatically at 4:3

  I use Windows Movie Maker Live to edit my videos, but it turns my videos from HD widescreen (MTS format) automatically to the 4:3 format with black bars on both sides. When I select 16:9 in the edition, it places an another black bars up and down the sides and the ruins of the entire video. I'm using Vista in my laptop, but my friend using Windows 7 do not encounter this problem.

  Can anyone help?

  Hello

  The problem is related to Windows Live, and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/

• When I import a video file into Windows Movie Maker it plays Audio and video

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Original title: when I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Watch the video file. The last 3 letters represent the file format.

  Windows Movie maker only supports the following video file formats:

  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If yours is not on the above list, Movie Maker will have probel play.

  In this case, you will have to google for a free video converter and change the format of your video file to WMV. WMV format is the most reliable format for Windows. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Movie Maker won't let me publish my videos!

  When I 'publish on this computer' dialog box is and does is display "Estimating Time."... "no matter how long I leave it. does not, never the numbers on time. It does not have a file instead I specified, but it goes to a few bites and then stops. I have no idea why he would do that.

  When I 'publish on this computer' dialog box is and does is display "Estimating Time."... "no matter how long I leave it. does not, never the numbers on time. It does not have a file instead I specified, but it goes to a few bites and then stops. I have no idea why he would do that.

  Check the file formats that you had inserted in movie maker. You might have used files that are not supported by the Director.
  Photo: jpg, png, bmp
  For video: WMV, AVI
  Music: mp3, wav, wma

  Note: If you use google for formats of files supported by Windows Movie Maker, you will find that the list is much longer than what I've listed. This is because I find those on my list are the most reliable and you don't have to worry about not having the right codec for files.

  t-4-2

• My Windows Movie Maker won't let me publish my movie... Help!

  I tried to publish my movie I did on Windows Movie Maker to my computer, but about 65% in edition, it stops and says:

  "Windows Movie Maker cannot publish the movie to the specified location.  Check that the payor source in your movie files are always available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  As far as I know, all mentioned in the post is fine (I checked all original source files, I tried different locations of publication, and I know that there is enough disk space, because the video is only about 2 and a half minutes), but I always get the message when it reaches 65%.  I have looked through many forums on Windows Movie Maker does not, but none of them does not seem to answer my question.

  Help, please!

  I tried to publish my movie I did on Windows Movie Maker to my computer, but about 65% in edition, it stops and says:

  "Windows Movie Maker cannot publish the movie to the specified location.  Check that the payor source in your movie files are always available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  As far as I know, all mentioned in the post is fine (I checked all original source files, I tried different locations of publication, and I know that there is enough disk space, because the video is only about 2 and a half minutes), but I always get the message when it reaches 65%.  I have looked through many forums on Windows Movie Maker does not, but none of them does not seem to answer my question.

  Help, please!

  =============================
  Just some thoughts...

  This happens usually when the source files are
  not totally compatible and also may be linked
  transitions.

  In Movie Maker, you could try to go into tools.
  Options / Compatibility tab and disable all
  the filters.

  Also you can try to convert your source files
  to different formats.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  And you can try to remove the transitions.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Project Windows Movie Maker won't play in Windows Media Player

  I created a 'film' in Windows Movie Maker - not a bad little program.  I used to be a professional video tape, and you can do things with Movie Maker and that you can't do with the edition of tape cassette - even in a television station in a big city.

  The film plays well in Movie Maker, but he won't play in Windows Media Player (Version 11).  I have Vista Home Version on my computer.

  I want to be able to send e-mail to friends and family who do not have Windows Movie Maker - but have Windows Media Player (not sure which versions have all my friends).  Until now, whenever I try to play the movie in Media Player, I get the following message:

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  When I click on the "get help from web" button, it takes me to this page:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6002.18111&ID=C00D1199&ContextId=83&OriginalID=80040265

  This page does not give me the solution to the problem and gives me no option to download/install the codec I need.  I don't know what a codec is and don't really care to know.    I just need to know:

  Should which codec I?

  Where can I download it?

  What are the two products of Microsoft.  Can they be compatible?  One of the options presented during "editing" the file is to be sent by e-mail.  Not much good if the e-mail recipient is unable to play.

  I can also play the movie using Real Player or I-Tunes - but it of okay for me if they work in these players or not, since my friends and family would be no players on their computers.

  Cynthia M.

  I created a 'film' in Windows Movie Maker - not a bad little program.  I used to be a professional video tape, and you can do things with Movie Maker and that you can't do with the edition of tape cassette - even in a television station in a big city.

  The film plays well in Movie Maker, but he won't play in Windows Media Player (Version 11).  I have Vista Home Version on my computer.

  I want to be able to send e-mail to friends and family who do not have Windows Movie Maker - but have Windows Media Player (not sure which versions have all my friends).  Until now, whenever I try to play the movie in Media Player, I get the following message:

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  When I click on the "get help from web" button, it takes me to this page:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6002.18111&ID=C00D1199&ContextId=83&OriginalID=80040265

  This page does not give me the solution to the problem and gives me no option to download/install the codec I need.  I don't know what a codec is and don't really care to know.    I just need to know:

  Should which codec I?

  Where can I download it?

  What are the two products of Microsoft.  Can they be compatible?  One of the options presented during "editing" the file is to be sent by e-mail.  Not much good if the e-mail recipient is unable to play.

  I can also play the movie using Real Player or I-Tunes - but it of okay for me if they work in these players or not, since my friends and family would be no players on their computers.

  Cynthia M.

  =======================================
  Maybe you just save the project that creates a .mswmm file.
  This file is no longer usable in Movie Maker for re - editing purposes.

  Republish the project in the format of video .wmv and you
  He can play in Windows Media Player.

  See the following article:

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Editing Windows Movie Maker... Editing video & video keeps freezing... Published the video freezes...

  Hello

  Frequently, I use Windows Movie Maker to edit videos of my friends... But WHENEVER I have to edit a video, and I play it back it ALWAYS freezes... Not the program, but the video Clip... And when I publish it, it freezes EVEN in the video as the preview... My ONLY solution is to keep cutting & removing parts of the video, but my videos are always less than 5 Minutes of time... Please HELP if you can... Thank U...

  Oh, I already know about the Type of Format already... All my videos are 'WMV '... And besides that & "AVI", any other Type of video Format won't let you edit video, he would go to the Audio Section... But I checked my memory @ BobinSECO and my computer says it was good & right now to 4.0 GB (RAM)...

  ==============================
  Just a thought...

  Try to reduce your graphics hardware acceleration
  in accordance with the instructions in the following article.

  (272193) PI: how to troubleshoot
  Graphics problems
  http://support.Microsoft.com/default.aspx?kbid=272193
  (scroll down to: reduce the graphic hardware acceleration setting)

  If they improve the question, you should look for the
  site Web of MFG. your video card
  an updated video driver.

  In both cases... don't forget to return the acceleration
  in full.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker will not publish my movie on my computer

  I tried to post this video to my computer from Windows Movie Maker. The video is long, only 42 seconds, so I doubt that there is a problem of length.

  When I try to publish the video, a dialog box appears and says "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I've checked everything and nothing seems wrong or irrelevant. I had to completely wipe my computer about two days due to the 'Blue screen of death' experience, but I was able to install any new drivers and restore my computer to its factory settings. I don't know what to do. Help, please!

  More than likely you are using one or more sources
  files that are not completely compatible with Movie maker.

  Several formats are apparently compatible with film
  Machine, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  See also the following links:

  Windows Movie Maker error cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/ Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows Movie Maker-impossible to publish on DVD

  I have a problem with Windows DVD Maker
  When I'm working in Windows Movie Maker, complete the work and click on 'release on DVD' when I hit burn everything starts working normally when the progress bar is 18.1% the fire stops and a new window appears headed Windows DVD Maker, in the window it says "Cannot create the DVD" followed by "unspecified error".  I tried to disable the filters in other programs, it was followed by "default reset" in the Windows Movie Maker; Tools; Options.  This error always appears, and I can produce is no longer my DVD from Movie Maker.  Can you help me please?

  Convert your mpg to wmv prior to import from Movie Maker.
  I don't know why, but using wmv format is the format of only more foolproof.
  There are a lot of FREE online video converter. Choose a.

  t-4-2