Why my site passes through?

Similar Questions

• Apple TV 4 Audio pass through

  Hi-

  My current setup is: 4 AppleTV via HDMI-> Onkyo HT-R990 7.1THX via HDMI-> Samsung Smart TV 60 inch LED. The TV speakers are turned off and that all the sound elements through my 7.1 System.

  My question is about how to disable the audio decoding on the Apple TV. Can the Apple TV 4 simply intercommunication audio without decoding? That's why my receiver will decode and choose the best audio configuration for content.

  Having a transmission option is fairly common on most devices such as Blu - Ray players. What's not an option on the Apple TV? I know by selecting "Auto" on the Apple TV, it will send the PCM signal. Why would I have DD or PCM if the content is DTS Master for example? It makes no sense to me.

  I think I have a 'Pass-through' option would satisfy loyal people optical cable and move is a real audio visual component of the Apple TV.

  Does anyone know how this can be done? Your help is greatly appreciated. See you soon!

  It can normally send PCM for music/video stereo and support the bitstream DD for 5.1, ATV 4 7.1 - I assumed AppleTV 4 this but have moved for a few months and don't have not connected my AV Pioneer amp just for the Samsung TV.

  AppleTV does not support DTS officially, certainly not for the content of the iTunes store is not an option, but I don't know about 3rd party applications that could broadcast "other videos" of local shares.

• Pass through IPSEC on Cisco 857

  Hello people!

  I have gained reciently a Cisco 857 router. I want to do a site-to-site VPN.

  I set up the ATM0.1 with "ip unnumbered" VLAN 1 interface. I have not configured the router to enable NAT or PAT. VLAN 1 is configured with a public Ip of my ISP address. Behind the cisco router, I have a Zywall 5, this device is my VPN gateway. Initially, it works very well with the other soho router but it blocks often, for this reason, I decided to change it for a cisco router.

  My problem now is that the cisco router does not allow the implementation of VPN.

  Need to activate the IPSEC pass-through?, how can I do this?

  Thanks in advance!

  If you connect through the console:

  recording console 7

  If you connect via telnet:

  farm forestry monitor 7

  monitor terminal

  Concerning

  Farrukh

• Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process

  Hello

  Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process.

  I remember never 1z0 - 447 Oracle 12 c Golden Gate Essentials review be a review.

  He has demonstrated lately on the oracle website.

  but I don't see it on the site of the view.

  I thought it was supposed to become available to plan August 8.

  Roger

  Looks like someone screwed up PV.  When you click on the "View reviews" link on the main page of Oracle to PearsonVue 1Z1-447 appears under «Other reviews"rather than «beta reviews»

  

• STR-DH520 - pass through

  Why my camera starts when I turn on my my TV to the receiver input. I have my ps3 connected to the receiver, then the receiver to the TV. I don't want the receiver all the time. But when I turn on the TV to the hdmi input, my receiver turns on. I have so I have to turn off the receiver and then continue 5000mAh mode.

  Rrangel,

  If you just reset your receiver and then you have to turn ON HDMI Pass Through.  It can also be beneficial for reference manual STRDH520 to understand what settings are available and how to use them to achieve your desired results.

  Settings HDMI (page 60)

  Control for HDMI [CTRL. HDMI] ON BY DEFAULT - CHANGE to OFF

  Passage of Signal HDMI in [COL. THRU] OFF BY DEFAULT-CHANGE on

• Why the Pages go through each file before opening one I clicked on that?

  When I click on a file I want in the Pages, the program passes through each file that I created before he gets to the one I want.  Is it possible to go directly to the file you want?

  Open the Pages with the SHIFT key is pressed, so it is not reopen previously open documents or close all your open documents before leaving the Pages.

  Peter

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you

• WRV200 VPN pass through limits

  We use a Cisco Small Business WRV200 to allow guests to our office to access the public internet, regardless of our corporate network environment. We regularly invited several visit of a company and generally these users connect to their company via a local VPN client. I noticed that after about 5 users activate successfully their VPN clients that no one else can connect to any other VPN tunnels. Internet connectivity still works when these 5 tunnels are active, but no other users can create a VPN tunnel after this point. Again, these are all movers or Pass through tunnels behind the WRV200 in one single environment NAT. is there a limit on vpn pass through or leaving behind this device connections and if so can it be changed? I expect a resolution of firmware to this problem, but it seems that it is only a single firmware version for this device. If this unit has an immutable limit, can then someone propose another product, Cisco Small Business wireless which has no limit of transmission?

  Thank you...

  If the NAT - T is enabled on clients and VPN gateways, there should be no problem. Otherwise, if two IPsec clients behind WRV200 are trying to connect to the same remote gateway without NAT - T active, 2 IPsec sessions could clash between them.

• Launch the Application IT Assistant with pass through authentication

  We have started to purchase DELL servers after many years using HP.  As such, we now need ot use DELL IT Assistant for our hardware monitoring.

  I am use IT assistant to go to the tool Server to my windows but server during the launch of the Web page I have to re-enter my credentials.

  Is it possible to have pass through authentication, whereas when I leave IT Assistant application launch so I don't have to enter a user name and password for the server administrator?

  Thank you

  Otte

  
  

• I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

  I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

  Acrobat 9 (and 8, of course) is not compatible with your operating system.

• Why my site is changing from Safari to Chrome Firefox?

  Why my site is changing from Safari to Chrome Firefox?

  Without seeing your pages and a better explanation anyone can tell you a lot. Suffice it to say that something changes is not useful.

  Mylenium

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• Why this site hang up?

  Someone can tell me why the site is suspended and never finishes loading? I know this has something to do with the CSS files, but I don't know why it does. What I am doing wrong?
  
  http://www.RMINC.com/test_b/test_example1.html

  Here's a small update...

  After finding out that my ieupdate.js file was causing the problem of loading, I did a little research of my own and found a much better solution to the problem of Double click content Active X I have determined that the JavaScript solution external 2: for multiple occurrences of embedded content method worked better that any other method, I came acrossed before.

  Thanks for this solution, Macromedia/Adobe!

• Site to Site VPN is in place, but no traffic passes through.

  Hello.  I'm sure this is a lot but I tear my hear and do not have cisco skills to solve this problem.  I hope someone here can identify what's wrong in my setup.

  Using the Cisco Configuration professional software, I created a VPN connection from site to site (between a cisco 1841 and 1811).

  The tunnel seems to be upward, as routers are concerned, but I can't ping anything on the remote networks. I thought that road maps have had something to do with it, but I don't see what is worng with them.

  Just to let you know, the device of 1841 has already a VPN tunnel works to another site, in case that confuses everyone.  Peers that I am concerned about are 141.0.59.x and 109.238.78.x.

  Thank you very much.

  Hi Haydin,

  You have the following:

  IP extended access list redirects the port

  deny ip 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255

  ip permit 192.168.1.0 0.0.0.255 any

  !

  Not sure why you have the entire network here with any keyword, it is better to create a static translation of one by one.

  Could you please remove it and give it a try?

  IP extended access list redirects the port

  no permit ip 192.168.1.0 0.0.0.255 any

  Thanks in advance.