Why not shut down windows by pressing the tap

Similar Questions

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Classic classic BlackBerry not shut down some time after the 10.3.2.556 update

  I did the update some time ago with no problem - it seemed.  Then the carrier said they need to send me a change.

  Of course we have to close my Classic to reset when the file is received.  .

  -Pressing the power button on the phone, account... backwards then restarts.  It will not stop.

  -Based on the high volume and low volume and did them the same thing.  No bottom closed just a restart.

  -By pressing the special touch to end on the right end of the used ot tool bar close.  Now, it will restart classic.

  I have a backup link about 8 days ago.  Unfortunately don't want to reproduce the problem, if there is something wrong in the facility stored while the backup...

  Good info on restoring farm appreciated ability.

  Data547

  Hello

  I suspect that there is a problem with your operating system installed which is the cause of this. So I suggest a clean reload (by LINK, or maybe even through ADF) of your operating system. Or maybe even go beyond an even newer version. There has been at least 2 and maybe 3 more since this version. Of course, you will need to use informal methods if your operator has not yet approved any more recent data.

  Good luck!

• Windows was not shut down properly due to the system not responding do not. How do I fix this problem?

  When I start the laptop it says that windows is not properly and start in normal mode, safe mode, etc. when doing whatever it is above, it takes a while and then the screen make dark with the single mouse arrow and the laptop still does not start at the top. What to do to fix this problem?

  Hi lana02,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the articles below and check if it helps you to fix the problem.
   
  Computer stops responding with a black screen when you start Windows XP
   
  Advanced Troubleshooting for General startup problems in Windows XP

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• Suggestion: Firefox would not hold up to a shut down windows with a close multiple tab dialog box.

  I didn't know where to send a suggestions, so he posts here. Please redirect it to the appropriate location.

  When I shut down windows and firefox works with several tabs, it pops up a dialog box and prevents the closure of windows. Last Friday, I shut the computer down before leaving work and found that it was still on when I went back to work Monday. Reason - Firefox.

  I prefer computers stop when I am away for an extended period of time to save energy.

  Tools > Options > tabs: [] "warn me when closing multiple tabs".

• How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  Hello jsitch, This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• iMac will not shut down or restart...

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  DRM92692 wrote:

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  Your office is frozen?   If not, stop or reboot can wait for something to finish - you close all open applications?   Allow you your system to connect to the internet (these pesky background downloads or you are not always aware of synchronization)

  As for hard shutdown - with button / stop

  Have you held in the power button for about 15 seconds to stop hard - otherwise he's asleep.

  After unplugging - press and hold the power button in for 15 seconds to evacuate the power of mac - that can help.