Classic classic BlackBerry not shut down some time after the 10.3.2.556 update

Similar Questions

• Envy 14 CTO will not shut, forces hard stop, after the upgrade to win 10 anniversary

  After a long wait in Win 10 the Envy 14 finally began to sleep and shut down properly. As soon as the update of the anniversary has been installed, we went back to the questions of the soul. System not completely stops and freezes to force a hard reboot, after that the restart that he stop or sleep is selected manually. If the system can accommodate on its own, then it is more closed or sleep without rebooting.

  Course on all drivers and troubleshooting power back shortly to all default values.

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• DeskJet 6940 ink black smudges on page some time after the change of the cartridge

  Ink started smudges on the printed page, not immediately after I changed the cartridge ink, but after about 50 leaves.  Some leaves have small lines perpendicular to the printed lines as was ink on the rollers.

  I opened the printer and wipe excess ink above the bottom of the grey cables and off the coast of stainless steel rod that runs through the Interior.

  Someone at - it ideas?

  With our thanks

  Hello NHarchivist,

  I see this is your first visit with us on the HP Forums. Please, let me take a moment to say 'Welcome. '

  I hope you enjoy your experience!

   

  To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have some problems with the smears and streaks on the print-out.

  Please click the link which helps out ink drool or streaks.

  Please do not hesitate to write me again if you have any questions or concerns.

  If I don't get an answer from you today, I hope you have a fantastic weekend.

   

  See you soon,.

• Windows was not shut down properly due to the system not responding do not. How do I fix this problem?

  When I start the laptop it says that windows is not properly and start in normal mode, safe mode, etc. when doing whatever it is above, it takes a while and then the screen make dark with the single mouse arrow and the laptop still does not start at the top. What to do to fix this problem?

  Hi lana02,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the articles below and check if it helps you to fix the problem.
   
  Computer stops responding with a black screen when you start Windows XP
   
  Advanced Troubleshooting for General startup problems in Windows XP

• Why not shut down windows by pressing the tap

  Lately, I have to hold the power button to turn off.

  Hello

  Thanks for joining us on the Microsoft Community Forums.

  It appears from the description of the problem that you are facing shutdown problems in the computer Windows XP.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2. What is the service pack installed on the computer?

  3 did you do changes on the computer before the show?

  I suggest to follow the steps in the article, and check to see if that does the trick:

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• BlackBerry Z10 missing Contact & miniatures FB after the 10.0.10.690 update

  Since I updated the OS to 10.0.10.690. I noticed that more than half of my miniature contacts are missing. (also, half of my FB contacts lack of thumbnails)

  Anyone else having this problem?

  A simple solution to get the z10 to rebuild your facebook contacts, is:

  1. enter in my world, delete facebook in your application.

  2. go in the settings of your home page, select accounts, select facebook and click on delete.

  3 re - start your z10

  4. come on in my world, find the facebook app, install it.

  5. log on to your facebook app and it syncs all of your facebook contacts in your contacts list. It would take a minute or two... Make sure that in your contacts application, turn on the who's who.  You may need to restart one last time and let it rebuild your contacts on your z10. It takes a few minutes... This give a try.

• IMac 27 "el Capitan 10.11.5 will not shut down

  Hi,

  iMac will not shut down or restart.

  When you click on the start/stop command, the screen clears in all icons and menus/finder but stuck showing the wallpaper...

  Only way is to hold the power button.

  Acted at the time so I installed a game (stellaris) with third-party software needed to play the game.

  Things I've tried so far:

  -First aid volumes. Came out OK.

  -Clear the game and the third party soft. OK

  -Restarted several times held close button. Problem unsolved.

  -Time to a game of prior time Machine install. Problem unsolved

  -Downloaded Capitan updated but could not be installed because it requires to restart which is impossible.

  Thank you in advance for any help.

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• New laptop will not shut down or restart completely

  I have very recently (last week) got a new laptop Acer Aspire E 15 Touch, but I can't seem to stop or restart it.
  The first time I stopped it it close normally, but since I closed it down to do updates (110) there will be no more.

  I'm going to stop it and it just sits on the "shutting down" screen for hours - the same with restart.

  I just had to hold the power key to close it (when it is not closed) or just put on sleep.

  Thank you.

  If you are not able to stop or restart the computer normally due to problems with the Windows updates, you can run the Windows Update Troubleshooter from the following link and check if this is useful:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  The following link may also be useful:
  https://support.Microsoft.com/en-us/GP/Windows-Update-issues/en-us

  If the problem persists, we recommend to take it back to the seller for help or contact the nearest respective Acer service center using the following link:
  http://us.Acer.com/AC/en/us/content/service-contact

  Hope this will help you.

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• iMac will not shut down or restart...

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  DRM92692 wrote:

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  Your office is frozen?   If not, stop or reboot can wait for something to finish - you close all open applications?   Allow you your system to connect to the internet (these pesky background downloads or you are not always aware of synchronization)

  As for hard shutdown - with button / stop

  Have you held in the power button for about 15 seconds to stop hard - otherwise he's asleep.

  After unplugging - press and hold the power button in for 15 seconds to evacuate the power of mac - that can help.

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• Windows 7 system crashes so that the installation of updates, not shut down

  I've upgraded to Windows 7 using a disc of Microsoft; Windows Update started downloading the updates.  Now it will not shut without doing it manually.  If there are 5 updates, it may hang on the update 4.  Then, after much cleaning in safe mode, etc, it will work perfectly, but hang in there 'shutting down '.  even if left overnight.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  FYI

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC