Why Satellite L20-183 does not support Vista

Similar Questions

• Re: Satellite L550-129 does not support the Toshiba external HARD disk

  Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard.

  Al other portable thosiba in the family meets the canvio store.e and many former protable?

  Why do you think so?
  Drive external DRIVE is not recognized when you connect it to Satellite L550-129?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Why lightroom cc gpu does not support mac HD4000?

  Version of Lightroom: CC 2015.5 [1067055]

  License: Creative Cloud

  Operating system: Mac OS 10

  Version: 10.11 [3]

  Application architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.3 GHz

  Built-in memory: 16 384.0 MB

  Real memory for Lightroom: 384.0 MB 16

  Real memory used by Lightroom: 558,1 MB (3.4%)

  Virtual memory used by Lightroom: 1 045,8 MB

  Memory cache size: 279.7 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX

  Exhibition: 1) 2560 x 1440

  Graphic processor News:

  Check the supported OpenGL: failed

  Seller: Intel Inc.

  Version: 4.1 INTEL - 10.12.13

  Rendering engine: Intel HD Graphics Engine OpenGL 4000

  LanguageVersion: 4.10

  It is simply not fast enough to bring any gain or it is too old and does not support the features of OGL.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Satellite L20-100 does bus support DDR2 800?

  Hello

  Does anyone know if Satellite L20 - 100 bus DDR2 800 support?
  Thank you

  Only some mobile most recent supported it but not your old Satellite L20.
  Upgrade buy compatible modules.

  Do you not know is you need it?

• Satellite L20 modem does not work in some cases

  Hello

  a friend bought a Satellite L20 last summer. In January, she started working on the Internet on an irregular basis, but has known trouble. So I looked after the laptop last week:

  When you try to connect to the Internet connect to the provider sometimes fails. If she finally gets the connection, it often occurs the message that the page could not be found, and only after clicking on the button "Refresh" the page several times finally appears. But oddly enough, every time I unplugged the power supply connection become noticeable better.

  (Win XP; pilot/diagnosis: no problem arose; provider works very well on different computers)

  Unfortunately, he had no chance to check the connection here with a different material. I can't say if the latest driver is installed, but think that Yes, because of the date of purchase. So, my guess is that the power cable is not adequately protected. But if so how? Or what else could be the reason for the unexpected behavior of the modem?

  Thanks for your suggestions!

  Hello

  I heard a similar problem with another model of Satellite. Solution was to install the Satellite A110 modem driver. Please don t ask me why, but test it.

  The modem driver, you can find HERE

  Good luck!

• Satellite L20: Modem does not get dial tone

  Hello

  My L20 specifications is not a tone whem I'm composing upward. On another pc, the connection works well, so I don't know that the line has a dial tone and the other computer is "listening".

  I also tried to uncheck the option "wait before the tone", tried to remove it from the Manager of devices, but after this all the modem still does not work. The current driver that is installed is version 7.20.00.00, because I can not install the latest version (7.25.00.00) (installation program does not end well, no specific error is given).

  Someone knows what to do?

  Open the system control panel, and then choose the phone and modem options.
  He check on the Modems tab. The modem should be placed in the list.
  If this isn't the case, then you must install the modem driver.
  Check the Modem function by pressing the 'button interrogate Modem.
  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).

  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Satellite L20-217 does not start

  Hello
  can anyone help?
  I have a Satellite L20-217 and it just stopped working on the other day.
  It was connected with the AC adapter, all of a sudden the message came on the screen saying my battery was low so less than a minute the whole machine has stopped working.
  I ve bought a new power supply and the s is still running is not on. I ve took out the battery for 2 minutes etc... and still nothing; West not sound and no lights.
  When the battery is in and the adapter is hollow area I still get nothing, but if I press the power button the left hand LED will blink for a few seconds then nothing again.
  I really need to get this working as I´am a tattooist and piercer hairdresser and there all my drawings etc. on it.

  Thx for any help

  You can start your laptop with AC power only (the battery is removed)? If so, start windows and after a few minutes, put the battery inside and post the result.

• Satellite L20 - battery does not work

  Hello! Today, I tried to turn on my laptop only with the battery and does not work. When I connect charger green light lights up but when I disconect charger all disappeared... .not workink... Whats happened? :(

  Hello

  Sounds like a dead battery.
  How old is your laptop and how long have you used the battery?

  As I remember, the duration of battery life decreases after about 1.5 to 2 years.
  It is approximately 500 loading and unloading procedures.
  For me it s not unusual that the performance of the battery goes down because the similar symptom happens for example with a cell phone battery.
  I think you should ask the Toshiba service partner in your country for the new battery.

  Greetings

• L50D-B satellite plugged in, does not support 0%. Battery in good condition health

  Hi guys.

  I've always had pretty good battery life out of my laptop 18 months old, but suddenly it says "0%, plugged in, do not load.

  The second I unplug power cord turns off (must restart completely when it is plugged in). I used the Toshiba PC Health software and it said that my battery has good health.

  I ordered a new charger online (pending on what happens). But I suspect it's more a problem of software - I don't know WHAT? Can anyone help? My computer took upon himself to update to Windows 10 this week, but what was going on before, but now, I'm stunned about where to find still something on this stupid system and my head will explode.

  Battery replacement is not an option due to the funds - I'll deal with it, if I owe to the track.

  Anyway, can until someone you please recommend something I can do? I read through the forum and through google, but the sudden upgrade to windows 10 has made it really difficult (and used all my mobile data, making it an expensive and unsolicited upgrade!)

  I had the same problem but seems to have got it works with Toshiba support assistance. It's what makes us
  1. turn off the power, remove the cable, remove the battery.
  2. replace the battery and cable
  3. turn on
  4. once the utility press F9 and Yes
  5. Press F10
  In my case the bars began to fill and the battery is charging. Then turn off and wait 30 minutes for the battery to fully charge.

  Funny, but the only reason why I got this result was because the computer store told me I had a week 4 wait a new battery and I need to be able to use it without the cable. He also said that the new battery has been the only solution...

  Guilbert

• Spectrum 13-4000 x 360 Convertib: why spectrum x 360 does not support the connection of facial recognition?

  This link lists the computers that support the connection of facial recognition Hello in Windows 10: http://www.windowscentral.com/here-are-all-pcs-support-windows-hello-facial-recognition-windows-10

  The spectrum of x 360 is not among them.  Is it because the camera in this laptop isn't a RealSense camera, or is it because the socket driver is missing for this machine?

  Any chance of accompanied by an upgrade of the driver of HP?

  Thank you

  Hi there @jwg,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the connection of facial recognition on your laptop with Windows 10.

  I suggest you roll back to Windows 8.1 if you can for the moment because not all of the driver are available yet for Windows 10.

  I'm not aware of updates at the moment of the connection of facial recognition. However, the updated Windows 10 drivers will become available on your HP drivers and Downloads Page specific products as they are released and become available for HP.

  If you are unable to back up, here's a link to the HP Support Assistant if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  You could also try Windows updates. They are coming with new resolutions for these issues every day.

  Have a great day!

• Satellite L20: drive does not recognize blank CDs - incorrect function

  My CD-RW/DVDR drive works perfectly as a DVD player, but when I insert optical media blank to copy a CD the drive is not automatically recognized by the computer (as it would when a DVD or CD is inserted).

  If I go to "my computer" and double click on the D drive and I get an error message saying "D:\ is not accessible. Incorrect function ".

  Hello

  This behavior is noticed by many users on various forums, and it is obviously not new. If I understand you right reading CD and DVD is not the problem.

  You can create CDs and DVDs using any burning software pre-installed? Does your drive read data self made and CD and DVD movie

• Satellite L20 fan does not stop

  Hello!

  I have a problem with my Toshiba laptop fan:

  It starts to spin and cools the system but doesn't stop until I stop the system and restart.
  The temperature is 37 ° C at the disk and 47 ° C for the CPU.
  I have no idea why the fan stops not more and its very annoying...

  Thank you for your answers

  Hello

  You have installed the Toshiba power saver on your device? Generally, all Toshiba laptops preinstalled energy saver. This program is responsible for the performance of the processor and the fan. You must enter the energy saver and check settings that control the cooling.

• Why After Effects CS6 does not support the GTX 480?

  In light of this supports the less powerful GTX 470 and nearly half as powerful GTX 285! I'm not made CPU when I have this card!

  Just hack the raytracer_supported_cards.txt file in C:\Program Files\Adobe\Adobe After Effects CS6\Support Files.

  Mylenium

• Satellite L20-121 does not start normally

  Hi guys

  Can someone tell me what seems to be the problem with my pc. I can start t normally, after contact with TOMORROW TOSHIBA, the screen stays white with Dim lights and I have to press F12 or entry to load windows. Sometimes I can't drag files, write messages and also whole system gel, I push the window button to proceed on everything I do, I hope someone help me.

  Thank you

  Hello

  HARD drive is set as the first boot device in the BIOS settings? Check it please.