Why text could not be erased?

Similar Questions

• the procedure entry point readerconstname xml text could not be located in dynamic link library libxml2.dll

  I found the following message in my laptop computer startup sequence, after I login to my account.

  the procedure entry point readerconstname xml text could not be located in dynamic link library libxml2.dll

  Does anyone know what I did wrong in order to get this particular message.

  THX

  Hi Flavio Ferrando,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

• Why tech could not successfully download Acrobat Standard. Question answer would be Acrobat Pro on 30 day free trial only was not removed from my computer?

  Was the reason why Tech to help me try to download Acrobat Standard could not do work because 30 day trail of Acrobat Pro was still on my computer after the 30 day trial?

  Yes, it is possible.

• Don't know why text will not show online

  I had a movie worked perfectly (offline) and I was wondering why the dynamic content will not display online.
  I have a dragable menu and I have images that have my content on. My menu is a clip. I tried to have the area of dynamic text on the image I want to he discovers content, but now it only works in offline mode.
  
  my code is:
  --------
  on {(press)
  _root. MS.scroll = _root. MS.scroll - total;
  loadVariablesNum ("me.txt", 0);
  }
  -------
  
  Should I change?
  
  Help would be very well accepted and appreciated.
  If this message is preferable to another place I'm sorry if I put in the wrong place!

  You sketch here? I answered by mail private here. I seem to have changed my stuff now and it works. :-)

• Why text does not able to display text?

  Referring to the file linked following, I would like to know why it cannot display the text at all.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  http://sdrv.Ms/1628Pwp

  There is no text inside, it's a series of brakes page

• Why I could not remove program icon after I uninstalled this program? and how?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with the icon of the program of programs
  • It is no longer in error messages... Check the location of the file and try again
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I guess you refer to the program shortcut on the desktop.
  If so, here's a brief non-technical explanation...
  A shortcut on the desktop is simply an information centre. He has a card for the program. When you click on the shortcut, the system will follow the plan and get the program.
  If you deleted or uninstalled the program, the system will not be able to find the program. He comes back and gives you an error message like "article not found" in this sense. For this reason, the systemis unableto do anything with the shortcut. Regarding the system concerned, the shortcut not there.

  Others will give you more ways and methods to solve your problem.
  My suggestion has always been... re - install the program > remove the shortcut on the desktop > uninstall the program.

  t-4-2

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Could not load the Norton power Eraser

  Installed Norton Security. Everything works well except a pop up window that says error 5013,3.

  Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".

  No mater how many times I try, could not load the new version.

  Don't know what I was doing wrong before, but when the pop-up window came this time it worked.

  I'm glad that it worked, but I wish I knew why.

• Why can I not format my text in a cell in my table using the property Panel

  If I use my property Panel to adjust my table it will then apply my changes, but when I click in a cell and try to move my text to the Center or add color it does not apply my changes.

  Does anyone have any idea why this could be please

  Oh my God, I got it back, I had deleted a hug!

• I use numbers to make files, but other people could not open, why?

  I use numbers to make files, but other people could not open, why?

  Hi Annie,.

  Only numbers can open a document in numbers. Excel cannot.

  In addition, there are several versions of numbers that work on a Mac. Older versions will be not open newer versions.

  What version of numbers do you run?

  What applications are the other people running?

  If other people are running Excel, you can export your document numbers to Excel (Menu > file > export to... > Excel). The export will not be perfect, but they will be able to open it and read it.

  More information, will lead to a solution.

  Kind regards

  Ian.

• Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

  Why I get this error message every time I opened Firefox saying: jqsnotify.exe - request error and then at the end of the line, he says: the instruction at '0x5ff3d322' referenced meory to '0xe41203c3 '. The memory could not be "read". Click on OK to terminate the program.

  This has happened

  Each time Firefox opened

  == I recently renewed and installed CA Security Suite and Firefox uninstalled and reinstalled again.

  http://www.java.com/en/download/help/quickstarter.xml - what is Java Quick Starter (JQS)? What is the advantage of running JQS? -6.0

  Disable Java Quick Start extension: Tools > Addons > Extensions
  Control Panel > Java > Advanced tab > various > Java Quick Starter (disable)

• When I text on my Mac, why did he not appear on my iPhone?

  When I text on my Mac, why did he not appear on my iPhone?

  Have you followed these steps to implement continuity?

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > sending & reception. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Make sure that your email address is checked everywhere.

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Question: when starting my 1 CCC database ~ I get, this installation package could not be opened... why?

  at the start of my 1 CCC database ~ I get, this installation package could not be opened... why?

  Please see the bottom of page for your support needs.
  http://CCC.CCCIS.com/pages/support/4.php

• I could not install the update KB2686509 for Widows XP Pro, for the last 6 months. WHY?

  I could not install the update KB2686509 for Widows XP Pro, for the last 6 months. WHY?

  Maybe check the related threads and see why others also had problems with this update:

  http://answers.Microsoft.com/en-us/search/search?searchterm=KB2686509&CurrentScope.ForumName=&CurrentScope.filter=&askingquestion=false

  especially this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

  That should answer your question about why you have a problem installing the update.