With large attachments, TB seems to be "loading message" over and over again.

Similar Questions

• Thunderbird will download multiple copies of email with large attachments; about half a Meg or more.

  Have uninstalled and re installed TB; still had the problem so deleted files popstate.dat; three old and I guess that the other two were for both accounts I have. Sometimes I go to the server/webmail and delete the large email to stop repeated downloads.
  Bill

  I tried a different e-mail program, and it did not download multiple copies. Tried to uninstall TB new and removed the front profile of re install and still had the same problem. One of the large files sent to my friend that I had installed TB on his computer for him and he doesn't have the problem. So I changed my email from POP3 to IMAP and now it seems that the multiple download problem disappeared. I would like to know well why I had a problem and my friend (and others) do not have.

• Can email folders with large number of photos inside without open each photo and attach? That is to say. jpeg1, jpeg2

  I use to send large numbers of photos using photobucket uploader of loose running on Windows XP. I am now using Vista and receiving a message from photobucket 'run and trust '?  The photos are currently loaded into 1 large file of a 150 pictures in my computer. In this folder, I have 4 files that make up the 150.  Ideally, I would just send a folder or each of the 4 files in 4 different emails to the same company. I try to avoid to open each photo as an attachment to e-mail. Any suggestions? Mike

  Zipper.

  --
  ..
  --
  "slamwebo" wrote in message news: fff9a32e-c595-4a95-bfba-7fe9201d6528...
  > I use to send large numbers of photos using photobucket uploader of bulk
  > running on Windows XP. I'm now using Vista and a message of
  > photobucket 'run and trust '? The photos are currently loaded into large 1
  thin this folder I have 4
  > files that make up the 150. Ideally, I would like to just send one
  > folder. I try to avoid to open each photo as an email
  > attachment. Any suggestions? Mike

• When I try to send emails to craigslist or yahoo with all attachments, he told host smpt is not found and pop3 host cannot be found and I have no idea what to do. Help

  E-mail address is removed from the privacy *.

  You will need to set up Windows Mail and use it for emailing to craigslist:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my Windows Mail is unable to receive large attachments?

  Hi all

  I recently started reading manuscripts of book to a literary agents, which means I get large Word documents and attachments. But some of them are not having transmitted my webmail (I have a btinternet email address).

  What happens here? I guess it must be because the attachments are too big?

  What can I do to help my Windows Mail with large attachments? I need to receive my work!

  Thank you very much in advance for any advice.

  Miriam (TeaAndChoc)

  Windows Mail has no limit, no limit's service provider that manages your email routing.  In this case, the BT Internet company is the cause of the block.

  You can ask them if they can allow attachments more bulky (I doubt they will), or you can use another service which has larger limits, like Microsoft Outlook.com E-mail or Google Gmail.

• With large attachment message stuck in the Outbox and sent to customers over and over again

  Hello ~

  I have Outlook 2003.  I tried to send a few messages with large attachments yesterday and we're still stuck in my Outbox.  It continues to send it to clients over and over again.  I need to remove it from the Outbox and it won't let me.  Please help, my clients are getting angry.

  Thank you.

  Check for working offline, and then delete the Outbox. Bruce Hagen MS - MVP [Mail]

• Digital Dictaphone with Windows 7 questions. Recorder current is not compatible and do not find online that will be compatible.

  I recently bought a computer with Windows 7 64 bit home edition for my father. His job requires him to use a digital voice recorder to dictate things and send by e-mail to his company in the .dss format. He is currently using a recorder Olympus DS 330 on its old Windows XP machine. I called Olympus to ensure (an Olympus DS-330 recorder voice digital) device would be compatible with Windows 7 BEFORE buying the new computer for him. They assured me that "with version 7.1 of their new software it should be compatible. I was worried because the rep on the phone with me does not seem very confident in her answer and him using the word "should" is never a good thing.

  Sure enough I got the new Windows 7 computer running, installed the software, they told me to get their site, connected his player... The device has been recognized as connected BUT no driver could be found. Nothing I've tried the last hours won't work because there is simply no driver of Olympus or someone else to make this device work with Windows 7. To make matters worse I can't find a single digital voice recorder to buy for him online that IS compatible with Windows 7 Home Edition 64-bit.

  I thought that this OS was not suppose to have questions 'pilot' that brought the Vista. Clearly, this isn't the case. Now I'm stuck with a computer of my father can not use everything just because Windows 7 can't find enough important digital voice recorders work with. Someone has an idea of a recorder of the word that is compatible with windows 7? Yes I have not looked at this site "Compatibility Windows"... no luck. So, if I can't find a... Looks like we're $500 thanks a ton Olympus and Windows 7!

  Thanks for posting that.

  The compatible ID confirms that it is not only a storage device, so it uses just the drivers supplied with Windows.  If this isn't a problem with Windows 7.  This is a problem in which the hardware vendor must be resolved.

  I searched online for the VID & PID and found only a few strokes on Bing.  None of them make no mention of 64-bit support.  And they are all pretty old.  I see dates pilot since 2001.

  So the best option is to contact Olympus again to see if they have drivers for Vista 64 bit or Windows 7 64 - bit for this device, or to confirm to you what devices ARE supported on 64-bit.

  Looks like the above driver package for their recorders VN series.  It seems to be relatively cheap - http://www.olympusamerica.com/cpg_section/product.asp?product=1389&fl=5&acccategory=84 (the VN5200 is still cheaper).
  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Why are there no button firefox at the top of my screen? There is on my laptop. I need to begin the process of large attachments in the binding process.

  Firefox instructions for using a link in the email to send large attachments came when I was preparing to do so in the email. Sounds good to me, but the instructions beginning with by clicking on the "Firefox" button on the upper left corner. I don't have one. I've updated the software but still no button. The Firefox on my lap top has this button. I use the laptop for classes. All the rest is with my PC.

  Why have I not the button, and how to do it there? I use Windows 7 on all my computers except of on my iPad.

  Right click on a zone empty of the tab bar and uncheck "menu bar".

  • The menu of the Firefox button instead of the menu bar

• The photos in photo looks blurry, with large pixels. Recorded images were of high resolution, why what is happening?

  I used the migration assistant to transfer all the data from my old macbook pro to my new iMac, now the images in the Photos seem to be blurred, with large pixels. Recorded images were of high resolution, why what is happening? Is it possible to fix it. In the old macbook pro, the image looks ok.

  Migration assistant has a really bad experience with iPhoto and Photos

  If you still your old MB of available space, connect it to your new Mac (network, mode target firewire or use an external to the Mac OS extended (journaled) format hard drive and drag the iPhoto library folder images on the new Mac and heck the iPhoto library to icon in the Dock to migrate Photos)

  I hope this will work better

  LN

• The graph refresh is very slow with large data sets

  When the graphics of large sets of data in tiara, the construction of the graph is slow (3 pts M takes 30 sec). Fair enough-, the problem is, however, some little change do you later to the curve, it will refresh all over again, and during this time you can't do anything else with DIAdem.

  Any way to relieve it?

  Problem seems to be solved - restart of DIAdem restored time to update to an acceptable level, or at least it seems that restarting is the only change.

  I tried later with the two parameters of charge mentioned by AndreasK and both just as powerful.

  I tried remote desktop access and it works all too well - also go remote DIAdem (to see if it's a graphics driver issue)

  I feel kind of silly not being able to identify what was wrong and I thank you for your help.

• I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  You can't keep slideshows as captioned photos.  Slide shows get migrated in the form of albums for the Group of photos is maintained.  But Photos don't have the ability to add descriptions to the slide show so that they would have to be manually added to each slide automatically.

  However, a possible solution would be to export every slide show in iPhoto as a Quicktime movie file. Which will keep the titles and descriptions on each slide.  The resulting QT files can be imported into the iPhoto library before migration or photo library after.

  

• iPhone 5 loads some cables and not with others

  My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

  Hello, SalinasEd!

  Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

  If your device doesn't load or loads slowly

  If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

  1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
     
  2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
  3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
     
  4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
  5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
  6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

  * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

  See you soon!

• G mail with animated graphics emails don't be loading not in Firefox. When I open Internet Explorer, and access my mail G images to load, the issue is with Firefox. Are there problems of setting I need to change?

  I received an e-mail with graphics animated through my G mail, but the images and the text was not displayed when I went through Firefox. When I went into Internet Explorer and open the same Gmail, images don't load. There is something in Firefox, this prevents the display, but can't find it in the settings.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• AirPlay - aTV video, sound effects for AExpress: does not work with large files

  Hello!

  My setup

  • Internett--> modem (Cisco?) --> a/c Airport Extreme (latest high version)
  • iMac, iPad, 2 x iPhones. iMac installed Beamer.
  • Bedroom: AppleTV 3rd GEN rev A - hdmi--> LG TV (old). AirPlay ON, 'Apple TV room '. Connected to the local network of 5 GHz.
  • Bedroom: AirportExpress 1st GEN 802.11 a/b/g N-Draft (last type of those that go right into the socket) with AirPlay - stereo--> stereo BOSE. AirPlay ON, 'room '. Connected to the local network of 5 GHz I also tried to connect 2.4 GHz network, no significant variation...
  • Living room: AppleTV 4th Gen. - hdmi--> LG TV (new). AirPlay ON, "iTV."

  Problem (abridged version)

  Most of the time - but not every time - when I stream video + audio iMac to aTV and choose to listen to the audio portion of the aTV to a separate AExpress (which is connected to a better BOSE audio system), the movie will not play. Streaming both audio and video - and only - the aTV works perfectly, but then I have bad sound, since I use the TV's internal speakers. What is reasons for it? Tips to fix it?

  Problem (full version)

  Every time when I stream video and audio from large multimedia files (about 3-4 GB .mkv) of the iMac (Beamer) on the ATV to the room, I didn't encounter any problem. Buffering is fast (2-4) and there is no delay or other negative experience. Unfortunately, as with all flat TVs, the sound of the TV is poor. Since I have a BOSE sound system, placed around this TV, I like to use it for audio. As I do this is - after the streaming media file (Beamer) iMac to the bedroom aTV - pressing the Center "Select" button during 1 sec on the remote to display the "audio" preferences and select money "Chamber" (AExpress related to the BOSE sound system). In this way, I think that audio + video is streamed to the iMac on the ATV in the bedroom, and the sound is then broadcast the ATV to the AExpress. This is where the problem occurs. Sometimes it works very well, as today in the morning. No lag and everything works fine. But most of the time, after changing the preference "audio" in the sound stream for the BOSE, the beginning of the play symbol buffering becomes the symbol of the break and nothing happens. I hit play again and the symbol of the game / buffering symbol lights up for a few seconds, and then again to pause. She never starts.

  The problem usually occurs with heavy multimedia files / large size 1080 p and 3-4 GB, not with the simplest 720 p files weighing about 1 to 2 GB. This makes me think it's a matter of WiFi capability. But if my WiFi network should not be able to manage that? I think that the apple TV in the bedroom and the AExpress uses the N standard, so it is the limiting factor. But if this interface should not be able to handle the traffic? Is it true that do what I do - separate the video and audio - use twice the network traffic?

  I also want to mention that everything works perfectly at certain times, like this morning. Last night (12 h) it wouldn't work at all... Perhaps there are more traffic yesterday (Saturday) evening.

  Questions (summarizes all Qs in text and some new)

  1. My network be able to handle the traffic encountered at the stream video + audio iMac to mountain BIKING in the room and streaming audio of ATV to AExpress at the same time?
  2. It is true that this configuration requires / use twice the network resources?
  3. Do you also think that my problem is caused by a network limited issue / the amount of data PR. second?
  4. I have a new (flat unit with power cord separate) Airport Express. This device manage more traffic and thus possibly resolve my problem?
  5. Other suggestions to solve my problem?

  Sorry for long post, but I think that its better with much info little. Have a great Sunday =)

  I think I can explain the reason for the problem... but I have little experience with sound problems... so you will need to figure out a work around.

  The nature of wireless networks, it's to manage the stream very well... but they are much less good at the sensitive time of things like multimedia transmission continuously. In fact, if you want to stream multimedia content over wireless, it is preferable to use specialized units... no wifi. I have a 3D projector and home theater system that uses a special wireless link from Epson to the projector... It is amazing that it can handle the required data of 3D projection. It does so by using 60GHz or some these extremely high FREQ... and totally dedicated units... no wifi. In the end, we ran an HDMI cable in the wall... it was largest wireless but not could be started reliably. Wireless is simply not ready for the big time of streaming video high definition even when dedicated.

  Wireless network adapter... It is wifi, can handle only one connection at a time and it time slices between clients. It's also half-duplex, so it can only send or receive... it can't do both at the same time.

  On the other hand, modern interrrupteurs ethernet can stream to multiple devices at the same time. It can also handle send them and receive at the same time... That is to say in full duplex. This is why the networks ethernet much more suitable for media streaming wireless never can be.

  As soon as you try to use double flow... even if it is audio (low bandwidth) and a video (broadband), you will cause huge delays to the video component. The video stream has literally if stop to give the time to the audio to catch up... you can immediately see where this will lead. Low resolution, it might work... but at high resolution, there is bandwidth inadequate considering the Division of time.

  It would be much better to use the audio on the TV. Or check if the TV itself has audio output... that plug into the standard analog audio system RCA or it could even have out optical. Who will then provide a means by which the flow must not be split. My samsung smart TV offers you both.

  The other solution probably won't be viable... execution of ethernet.

• What to do with large channel count screens?

  My experience with large channel count, it's that you need to separate the mass shielding of the data acquisition system.  The current shields can be very high especially for number of major routes.  What would NEITHER take on that?  I think it is difficult to ensure that the ground used by the chassis is a real land.

  Hi Kyle,.

  I understand.  It would be better to be careful in this case.  Its impossible to know how much noise is induced in our environment.  Shields will go to a large plate (real Earth) and does not pass through the equipment NOR.

  Maybe NEITHER is going to try an experiment with 1000 channels or more in a noisy environment to test the PXI chassis.

  James