The yellow light that locks / unlocks the touching mouse pad stopped working

Similar Questions

• ARC Touch Mouse Scroll stop working

  Hello

  I use Win 7 (32-bit) with MS software arc Touch mouse and drivers installed. Running on HP Touchsmart TX2 Tablet.

  I am facing a problem with my mouse with regard to scrolling.
  After "turning on" the mouse, there is a green led and everything seems to work. The Green LED then disappears, probably to save battery.
  However, after a short period of time, the scrolling feature will not work. There is no "feedback" scrolling felt either of the scrolling strip. But when I flatten the mouse and turn it back on again, everything works as normal.
  But after a while, the same problem resurfaced. I have to turn the mouse then turn it back on again. Sometimes, the scroll function "switch on" itself back automatically. But most of the time, it stops just to work altogether.

  It's very irritating. It seems that no one else have this problem.

  Help, please!

  Hello

  I wish that you follow all methods/steps in the article to resolve the problem.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• Why the Touch i.d. stops working?

  I.d. Touch will work for a day or two, but then it does not recognize the fingerprint. I understand that surfectants capable of affecting reading, but even if he is no lotion involved, it is not yet read the footprint. Any suggestions?

  Pwocmom wrote:

  I.d. Touch will work for a day or two, but then it does not recognize the fingerprint. I understand that surfectants capable of affecting reading, but even if he is no lotion involved, it is not yet read the footprint. Any suggestions?

  Use the ID Touch on iPhone and iPad - Apple Support

• My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

  HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

  Try these standard troubleshooting steps in the following order:

  Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

  See here for more details on the restoration: https://support.apple.com/en-us/HT201252

  If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

• Make a right click of the magic mouse has stopped working

  Right click my magic mouse function does not work. Is it a hardware problem or can I fix it myself?

  Which machine do you use?

  What operating system do you use?

  What version of Magic Mouse do you use?

  Please keep in mind that we still need retail in order to answer the questions... otherwise its speculation that helps the person.

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  You will need to go to the control panel > hardware and sound > mouse and see if the settings for the mouse pad have a function called "Tap-to-click" or something similar in the description.  The exact name of this feature differs depending on the manufacturer of the software for the mouse.

  If you do not see this option to be available, you will have to probably go to the support site for the manufacturer of your PC and download the latest drivers for your model computer mouse pad and install.  Once installed, go back to the mouse settings in the Control Panel, where you will most likely available additional settings after the driver installed.  I hope that the "Tap-to-click" function will be available to turn on or off.

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• The touch mouse settings

  When MS will come out with a more precise adjustment of the touch mouse? Specifically setting the sensitivity of touch. Boost rarely picks up the movement, laying my hand on the mouse active options of two fingers with any purpose of me. These two get rather frustrating, one does not work when you want and others work when you don't want it.

  It is not MS that controls the touchpad, it is manufacturer of the touchpad that provides the driver for it.  The controls are in the mouse control panel applet.  I am convinced that the touchpad is a mosochistic device created by evil demons.  :-)

  A small investment in a real mouse is not a bad idea when you can buy them for as little as $4 these days.

  I hope this helps.  Good luck.

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  Check if you have picked up malware in your travels.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  Check in safe mode.

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  See if you can isolate a possible cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Receives the pop-up indicating that tieobnu.exe or tieoubnu.exe has stopped working

  Original title: tieoubnu.exe

  I get a pop window indicating that tieobnu.exe or tieoubnu.exe has stopped working. I can't find this program on my computer or by Google search?

  Any ideas? [Moved from the community involvement Center]

  Hello

  Google has no information on these names, so it can be a left over Malware boot entry that was removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• The touch mouse settings hold won't save not (Windows 8, 64-bit)

  Hello

  I'm having the same problem has already said. Working fine until today. Now will not Ravel. Help, please.

  Thank you

  Glen

  Hi GlenBrettargh,

  Thanks for posting your question in the Microsoft community.

  What happens when you try to save the settings of the tactile mouse of hold?

  Do you have an error message when you try to save the settings of the tactile mouse of Wedge?

  Have you checked in the Device Manager if there is no error message?

  Method 1: steps to go to the Device Manager

  1.right - click on the start screen, and then click applications.

  2. once the scrolling of screen applications, or drag to the right until you see the topic Windows system .

  3. press on or click on Control Panel, located on the Windows system.

  Windows 8 will bring up the office and automatically open the control panel.

  4. press on or click on mouse and other pointing devices.

   

  Note: If your control panel display is set on large icons or small icons, you will see mouse and other pointing devices . In your case, just type or click on Device Manager and then go to step 6

  5. in the mouse and other pointing devices window, click or tap on Device Manager, located under the keyboards.

  6. click on the arrow and check if you see an error message/code.

  Method 2: Update the latest version of the touch mouse of Wedge drivers.

  See the link to download the drivers from the mouse touch of Wedge.

  http://www.Microsoft.com/hardware/en-us/d/wedge-touch-mouse

   

  If you need further assistance, please answer and we will be happy to help you.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT