Why Thuderbird stopped sorting emails by date and added a new sort of his method?

Similar Questions

• Sort of the original data and creating a new channel

  Hello

  I have a channel called "engine speed".  This channel extends the numberic values between 0 - 3000.  I want to create a channel named "Op_Sensor_Desired_Pressure" is the same length as the "engine speed", which I am familiar with.  I want my fill my Op_Sensor_Desired_Pressure channel with the data I have.

  I attach a CSV file that indicates the speed of the engine with the Op_Sensor_Desired_Pressure value.  So what I want is when the engine speed is = to what is in my CSV file I want to fill my Op_Sensor_Desired_Pressure value with the specifications in my spreadsheet to.  Values that do not exist then I want to present with a "NoValue".

  I thought to use a dictionary but cannot make it work. (As below)   I've also attached a set of data that I use.

  Dim dict3, j, t
  Set dict3 = CreateObject ("Scripting.dictionary")
  j = chnlength (1)

  Dict3.Add '630', '1 '.
  DICT3. ADD '1010', '2 '.
  DICT3. ADD '1020', '3 '.

  Call ChnAlloc ("Op_Sensor_Desired_Pressure", j, 2)
  For t = 1 to j
  IF dict3. There are (ChT (t, "Engine speed")) then
  CHD (t, "Op_Sensor_Desired_Pressure") = Dict3.Item (ChnVal (t, "Engine speed"))
  On the other
  ChD (t, "Op_Sensor_Desired_Pressure") = "NoValue".
  End If ' dict3

  Next

  Hello J,

  I have advanced and added the linear interpolation between the 2 fit points closest to you at each measured engine speed value.

  Call DataFileLoad (RawFilePath, 'TDM')
  
  Call DataFileLoad (FitFilePath, "CSV")
  
  Set RawGroup = Data.Root.ChannelGroups (1)
  
  Set FitGroup = Data.Root.ActiveChannelGroup
  
  Set RawSpeedChannel = RawGroup.Channels ("motor speed")
  
  Set FitSpeedChannel = FitGroup.Channels ("motor speed")
  
  Set RawPressChannel = RawGroup.Channels.Add ("Op_Sensor_Desired_Pressure", DataTypeChnFloat64)
  
  Set FitPressChannel = FitGroup.Channels ("Op_Sensor_Desired_Pressure")
  iMax = RawSpeedChannel.Size
  
  XMin = CHC (FitSpeedChannel, 1).
  
  XMax = CHC (FitSpeedChannel, 2)
  
  FOR i = 1 TO iMax
  
    X = RawSpeedChannel (i)
  
    n = PNo (FitSpeedChannel, X)
  
    XN = FitSpeedChannel (n)
  
    IF X = Xn THEN
  
      Y = FitPressChannel (n)
  
    < xmin="">
  
      X 1 = FitSpeedChannel(n+0)
  
      Y1 = FitPressChannel(n+0)
  
      X 2 = FitSpeedChannel(n+1)
  
      Y2 = FitPressChannel(n+1)
  
      m = (Y2 - Y1) / (X 2 - X 1)
  
      Y = Y1 - m * (X 1-X)
  
    Else if X > XMax THEN
  
      X 1 = FitSpeedChannel(n-1)
  
      Y1 = FitPressChannel(n-1)
  
      X 2 = FitSpeedChannel(n+0)
  
      Y2 = FitPressChannel(n+0)
  
      m = (Y2 - Y1) / (X 2 - X 1)
  
      Y = Y2 + m * (X - X 2)
  
    ON THE OTHER
  
      IF X > Xn THEN
  
        X 1 = FitSpeedChannel(n-0)
  
        Y1 = FitPressChannel(n-0)
  
        X 2 = FitSpeedChannel(n+1)
  
        Y2 = FitPressChannel(n+1)
  
      <>
  
        X 1 = FitSpeedChannel(n-1)
  
        Y1 = FitPressChannel(n-1)
  
        X 2 = FitSpeedChannel(n+0)
  
        Y2 = FitPressChannel(n+0)
  
      END IF
  
      m = (Y2 - Y1) / (X 2 - X 1)
  
      Y = Y1 + m * (X - X 1)
  
    END IF
  
    RawPressChannel (i) = Y
  
  NEXT ' I

  I enclose a file TDV useful to show the correlations and the gap between oil pressure measured and desired.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• ITA 8.0 and adding a new SNMP alert source

  Hello

  I added a new source of alert SNMP to monitor if a Netware Volume is dismounted.  If I unmount a volume on the server it warns me of this.  Everything is good.  Problem is that it does not have to be what volume.  I have to enter a kind of variables in the "FORMAT STRING" but I don't know what.  I have a SYS and a volume of DATA.

  Netware trap is as follows,

  volAnyDismounted TRAP-TYPE--1.6.1.7.17/1.2.5.7.35
  COMPANY nwalarm-mib
  VARIABLES {}
  serverName,
  trapTime,
  volumeName
  }
  DESCRIPTION "the server removed the indicated volume in»
  response to a DISMOUNT command. »

  --#TYPE "FileSys: flight dismantled."
  --#SUMMARY "%s dismantled on the volume.
  --#SUMMARY "%s server."
  --#ARGUMENTS {2.0}
  --#SEVERITY OF INFORMATION
  --#TIMEINDEX 1
  --#HELP "nwalarm.hlp".
  --#HELPTAG 221
  -#STATE GRADIENT

  : = 221

  Anyone know by reading the above what should I enter in the FORMAT STRING for this tell me what volume disassembled?

  Any help would be appreciated.

  See you soon,.

  Needles

  
  

• Why my icloud unable to connect, he wrote "the maximum number of free account has been enabled on this phone" why? I already reset my iphone and create a new id

  Why my new id icloud unable to connect? He wrote "the maximum number of free account we enabled on this phone, while I already reset my iphone.

  A device can create only three accounts iCloud, after which still attempts to bring the message you see. This is related to the material and there is no way around it - reset makes no difference. What you can do is to create a new account iCloud on another Mac or iOS (not Windows) device, then you can sign in on your phone.

• Why did Microsoft keep "to abandon" OS and introduce the new OS when they old BONES don't ever work in the first place?

  VISTA seems to be the MOST aggrevating experience.  Then came "Windows 7" and is now at the forefront "Windows 8" when THEY have NEVER ABORDE LES PROBLEMS WITH VISTA AND WINDOWS 7, now they'll introduce Widnows 8.

  Can someone explain to me (with a VALID point) as to WHY Microsoft keeps "to abandon" is the customer base loyalty and introduce NEW operating systems and they never solve the problems that were in the 'old BONES '...

  A Mac can get a virus.  There are too many users stupid that click on stupid things like Windows.  What he does not (but longer) is market share and thus an economic reason to attack him.  But to say that he "' not get virus, sorry, it can and it has too many flaws.  It doesn't just have the ecosystem of the attacks.  If a tree falls in the forest and nobody is there to hear it, it falls really?  If a vulnerability to a Macintosh system don't get coded upward, because there is more targets in the Windows world, this actually means that a Mac can't catch a virus?

  Wait until the Mac have economic objectives and equivalent market share so that they are equal and then we'll come back to this thread and make that call.

  Do you mean the difference between the Windows and Mac operating systems?  As PC does in fact mean personal PC - and Macintosh based computers are PCs.

  The EXACT difference with regard to the operating system is that Mac is based on the core Unix - http://en.wikipedia.org/wiki/History_of_Mac_OS_X so that Windows is the C and C++ language based as I understand it.  http://StackOverflow.com/questions/380988/what-programming-language-was-Windows-Vista-programmed-in

  That's like asking what EXACTLY the difference between the German and the French language.  They are different orgins, different codes.

  The current Mac OS was actually bought by Apple because they need a new OS - purchased from Steve Jobs, who had been expelled from the Apple and then begins.

  Both are operating systems that follow the orders given to him by the man, written by humans, who need updates for adding features, and the security fixes for when they are not exactly what they intend to do.

• Move all my data and OS to new hard drive

  Hello world

  Well, my problem is that my hard drive which I installed today is insufficient memory.  I can only have a hard drive connected to my computer if I want to transfer everything (including Vista Home Premium) to the new hard drive.  I installed the new hard drive and disconnected my CD player in the process so that both hard drives are now connected and installed ready for operation.  I know how to back up files in windows, but I want to spend all completely (cookies, programs, photos, Vista, etc.) or as much as I can.  I will have to reinstall the programs, but I don't want to reinstall Vista.  I hope that was enough information and thank you for your help!

  See you soon

  Disk manufacturers hard software power of cloning to do what you want to do.
  Check on their website.

  And read this:

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  The foregoing does NOT apply to you if it is recommended, as you have Home Premium.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~.

  For the 3rd party software to do:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner

• Date and time of the blackBerry Smartphones

  Hey. I have the BlackBerry Curve 8520. I don't know why I can not reset the date and time. When I try I get this message: ECEPTION EXCEPTION INDEX - 1 > = 2

  What can I do? Can I reset the phone?

  Thank you

  E

  Do a simple reboot on the BlackBerry this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try to set the time again.

• Backups of Server 2008 R2 running slowly after deleting failed drive and adding new USB drive replacement

  We had a disk which is used for our backups on one of our servers using a USB docking station.

  (We use 5 x external hard drives for our backup schedule).

  I removed the defective drive and added a new using the correct wbadmin command.

  Now, everything works fine except that the backup now ends at 0831 considering that with the old disk, it would end to 0600.

  There is no any difference about this disc is in the USB docking station - it's just to take 2.5 hours more than previously on all players.

  Starting backup to 2100.

  What can I do to bring it back up to its initial speed?

  Thanks in advance,

  Dave

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• What is the clock system in computer/OS and why a computer fault scenarios different date/time in the office exsist? Hotmail started confussion. The clock is not everywhere and nothing works.

  My friend computer has entered 'back' and 'blue screen dominations' with only the keyboard access that we apparently had time to normal windows. (Vista) Now with normal Windows, the Web browser (firefox) would not connect with "Hotmail". Error message "Hotmail certificate is out of date and not trustworthy... blah blah blah", so I checked on another computer. Apaparently Hotmail is available only through Windows Live (with an address @live.com) so I went back to the original computer and tried to connect to the new address.

  What happens with Vista / Windows / Microsoft / Hotmail?

  In particular, where you connect with "Hotmail" these days if their old browser (Mozilla) does not connect during their emails?

  I do not use these OS and Hotmail (today) to programs is not on my agenda. Can someone give a glimpse at why "Hotmail" on the Mozilla or Internet Explorer has "certificate Expirey date"?

  Or did someone give a website address for the updates on the new Hotmail connections?

  Enjoy the time and insight to get back to me with some ideas.

  (The first is always the best)

  Kind regards

  Rakko.

  Submit all Live and Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Why changing Date and time?

  Hello
  Initially, I had a problem where one of my hotmail email accounts wouldn't sync and it came to light that my date and time were wrong. I don't understand why my time and date have been late and not the correct time and date. Is it possible that I can know why it happened or repair. The time and date are ok now.
  Thank you

  Check the settings of Date and time, language, and region of the Panel. It could be that the utility of time Internet is "correct" values.

• Photos Version 1.5 does not sort by date AND time

  I use a Macbook Air early 2015 running OS X El Capitan 10.11.5 & version 1.5 of the Photos. I took ~ 200 pictures at an event using a camera of 2 nights ago. I put the SD card in my camera in my Mac tonight and uploaded all the photos at a time. They are not in chronological order - arrrgghh!

  All photos were taken from Headquarters even of the same place the same evening. No adjustments were made at the time of the camera during the event. I checked the time / date stamp on the pictures - they are accurate, then I haven't adjusted their. The photos are simply in the random time sequence.

  I've read the support forums & tried to solve the problem by creating a record of the event, and then selecting all the photos, and then 'view' > 'fate' > 'keep sorted oldest first' and the order does not change.

  Can someone help me get these pictures in the order in which they were actually taken?

  Thank you!

  Photos sorts the images differently depending on which mode you are in.

  Special album 'All the Photos' is sorted by the date that the images have been added to your library.

  'Photos' special album is sorted based on the timestamp of image creation and organized automatically based on the date and place on Moments, the Collections and the years.

• I want the date and time to stop printing on the bottom of my print outs

  The date and time printed at the bottom of print all. It doesn't matter if it's Firefox, IE, my emails, or even a word document. I tried to remove the header/footer, but because it prints on everything and everything I print, I think it might be a desktop definition...? I am running Windows 7. Help, please.

  Can go you to your devices and printers on your Start Menu and check your settings in your printer? You're right, it could simply be that a bizarre is activated he forced a timestamp on all your printing.

• I have a Mac Book (2006), all my emails since two and a half years have the same date. How to bring back the original dates?

  Of 'date and time' I tried to drag the month and year of my menu bar. He did not stay, I did several times, but nothing helped. I closed the window and went back to my Thunderbird email to see the date, I tried to use became the date in the column "date of receipt" of all of my emails back for 2011. I changed the date a few days later, and then the date is changed on all my emails. I want to cancel everything I done the dates so that the emails show when they were initially received. I managed to get "the order received" which helps a little, but I don't see the original dates.

  I checked "set date and time automatically", but it does not change the dates on my saved emails.

  Of 'date and time' I tried to drag the month and year of my menu bar.

  Is this something Mac?

• As of the 31 version, why is there still no option of Thunderbird to insert the date and time in the message that you write?

  As of the 31 version, why is there still no option of Thunderbird to QUICKLY insert the date and time in the message that you write?

  Literally, saw this option very well needed - and opportunity-"promise" for three years now, and even if there are only one or two formats that could be used, at least the option is there.

  It seems that only is to bind a Macro, and the tool to Thunderbird and do it this way.

  Joe Rotello
  [email protected]
  Skype: joerotello

  If the installation of the add-on of TimeStamp is unacceptable for see you if there is a related add-on that you that you already might have managed to convince author to add your function. The Add on more for example has many variables that can enter the body of the message that get automatically replaced with the appropriate data when you merge a message.

• Photos do not sort by time when the Date and time are adjusted

  I'm the combination of images of my friends with those friends, using Mac Photo of OS X V10.11.4. Because the dates of our cameras vary, I used "Image, set Date and time" to change the dates of the imported pictures. When the dates and times are adjusted, the photos are sorted by date no time. Added photos changed the given date are sorted at the end, regardless of time stamp. The sort options in the pictures leave much to be desired.

  Where are you seeing this? All the photos are sorted by date/time, the photo has been added to the library - Photos (years/collections/moments) are sorted by date/time pictures

  You can select the photos of interest and create your own album of them and then sort but title ascending or descending or by date

  LN