Why volume TM on my external drive recording also 2 other volumes to TM?

Similar Questions

• Why Photoshop CS5 using my external drives?

  I keep having a problem where I can't take it apart my external hard drives while Photoshop is running.  I have unchecked in the system for "scratch disks" preference, "then what else can cause Photoshop to use external drives?  It's a real drag to have to leave Photoshop every time I want to spend my laptop in another room.

  (By the way, the only reason why this disc is attached is that it contains my music library, so no, I'm not open files on this disk is.)

  You have no files to everything that Photoshop can use on the drobo? Brush Tip shapes, patterns, etc.

  None open at present, but what about files in the list of recent documents?

• Why do I unplug my external drives when I reboot

  Using Windows Vista 64, the computer will not restart unless I unplug my external drives.  Can I avoid having to do this?

  Buna,

  To do this you must have an Option for your motherboard at STARTUP of USB enabled in the BIOS.

  He's been looking for this drive as the BOOT Option Option when you turn. but there is nothing that it can BOOT from on your external drives they would be NOT Bootable for you.

  This is a BAD Option for you then change in the BIOS.

  Please read and modify to make it not BOOT from USB Drives; Sorry, you need this deal with what they say

  ""How to get started on a USB device.

  http://pcsupport.about.com/od/tipstricks/HT/bootusbflash.htm

  "To change the Boot order in the BIOS.

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Please let me know if it was good advice thanks.

  Revedere.

• I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  When I 'import' a RAW/DNG file, the file gets automatically saved the item COPIED in my D drive under "My pictures" folder This info is available on the left panel. Instead, I want the file to go in my F drive which is my external hard drive.

  Lightroom help: explains how to import photos to a specific location. Scroll down to section 5, «Say Lightroom where to put your photos» Lightroom help | Import photos from a camera or card reader

• Why the files are stored on an external drive not appearing in the "other" classification on my iMac HD?

  I'm running OS X version 10.11.4 on an iMac, retina 5 K 27-inch/3.5 GHz Intel Core i5 with 24 GB RAM/1 TB HDD and I have had for about a year, although I migrate some files over my old machine, but most were on an external.  I have almost all my larger files on an external drive 2 TB - for the most part hi res .eps, .jpeg, .png.

  I run CleanMyMac 3 as a utility. When I saw recently that I had more than 600 GB of 'others' I decided I have to spend the day to clean my files and machine - and have therefore been sucked into this rabbit hole.

  After cleaning duplicate files, empty the caches, removing unused applications and clean the external hard drive, I have still 570 GB of "other".  When you click on the bar in their own my Mac, it gives you a list of what is included in each of the classifications of file storage.  I understand, including all Documents to plain text, PDF and even files .docx, ect...

  what I don't understand is why:

  1 .pages (documents created in the clean Apple program) are not classified with documents, rather than as 'other '.

  2. why each of my .eps files that are stored on an external drive also claim space on my Mac?  It would potentially be the preview images displayed in the Finder? And if so, why it store a snapshot of the same size as the actual file?

  AND, most importantly, I can recover some of the disk space consumed by the huge amount of .eps files?

  Thank you

  Christina

  A

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac3.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac3.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  B

  For the other category in the display of information storage, see this support article. If the display appears to be inaccurate, try to rebuild the Spotlight index.

  Empty the trash if you don't have it already done. If you use iPhoto, emptying his trash internal everything first:

  ▹ iPhoto empty the trash

  In pictures:

  ▹ Show of the recently deleted ▹ file delete all

  Do the same thing in other applications like Aperture, with an internal feature of the trash. Then, restart the computer. Temporarily, which will free up space.

  According to the documentation from Apple, you need at least 9 GB of free space on the boot volume (as shown in the Infolog) for normal operation, not the mythical 10%, 15% or any percentage. You also need enough space to allow the growth of the data over. There is little or no advantage in terms of performance to get more free space than the minimum Apple recommends. Storage space you'll never use is wasted space.

  See this support article for some easy ways to free up storage space. A common waste of space is old backups iTunes to mobile devices. As shown in this support article, select the devices tab in the iTunes preferences window, select the backup that you want to remove and click on delete the backups. Keep at least a backup of each device you use yet.

  You can use a tool such OmniDiskSweeper (ODS) to explore the volume and discover what is take up space. You can also delete files with it, but not unless you don't know you know what you remove and that all data is stored safely. This means that you have several backups, not one. Note that CESO works with OS X 10.8 or later.

  Deletion of files inside a photo library or iTunes will damage the library. Such a library should be changed within the application that created it. It is the same for e-mail files.

  Go further than if the problem is not resolved by the steps above.

  ODS cannot see the whole file system when you run simply by double-clicking; He sees only the files that you have permission to read. To see everything, you must run it as root.

  Back up all the data now.

  Install the application in the Applications folder as usual. Quit it runs.

  Triple-click any where in the text line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination.

  security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. You will be asked for your login password.

  The application window opens behind other open windows. When you scan a volume, the window will finally show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.

  I do not recommend that you make a habit of doing. Do not delete anything as root. If something should be deleted, make sure you know what it is and how it got there, and then remove by safer alternatives. If in doubt, leave it alone or ask for advice.

  When you are finished with the app, he quit and also to leave Terminal.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Why is my internal ssd flash drive reports as an external drive

  I just upgraded to an SSD to allow installation of Win-10 of 1 TB. Bootcamp and 'about this mac' see my new ssd 1 TB as an external drive and won't let me move forward in bootcamp.

  It's the only drive connected to the system, it replaced the 250 GB internal drive so why he reported as external.

  Any - one know why this is or has a fix for this problem?

  Please perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  OS X Terminal, after the release of the following command

  diskutil info /.

  I assume that you have replaced the PCIe internally with a 1 TB flash.

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• Why a laptop HP dv6 not see a 3 TB external drive

  I have a HP dv6 laptop.  It's a Core i7 Windows 7 Premium.  I don't know the model number.

  When I plug in a hard drive Seagate external 3 TB laptop is not see it.  I have an i7 desktop which has no difficulty to see TWO of these external sources.

  Why the laptop doesn't see the 3 TB external drive?

  If someone can tell me how to find the model number, I'll be happy to oblige.

  It comes with a 320 GB and 4 GB HARD disk but an extra 4 GB has been installed by the retailer, when I purchased from Harvey Norman.

  I'm SO sorry!  

  In desperation I tried a different cable and it works   

  I apologize for wasting time for everyone.

  Well would you believe?  The * cable!

• Why-letter from external drives gets changed in windows 7

  Hi all

  Can someone please advise, why the external drive letters gets changed even after changing disk management in windows 7.

  He worked for two days and turns again.

  In Windows, each external storage device is assigned a unique ID (UID). That UID and the corresponding parameters are stored in the registry. The seetings include the drive letter assigned as well. If one of the drive letter is assigned to tell the reader, manually, after unplugging it, the same drive letter assigned to the drive B, the letter for the drive B. For example, if A player is connected again, a new letter is assigned automatically. You may notice that the drive letter for drive B cannot be used as drive B is disconnected, and yet the settings in the registry makes Windows assign a new drive letter to a drive, like the manually assinged drive letter B is allocated for drive B and the next time you connect player B the same drive letter is assigned, according to the registry settings.

• Transferred XP hard drive to external usb box. Records showing as empty on Win 7 64 system read external drive.

  I can see the folders but contents show as empty. Visible hidden folders option is checked. This drive was my first drive on my old computer which had XP 32 bit. I took the car and put it in a external hard drive Bay, so I could keep my files.

  Getting a family system Windows 7 premium, I am able to see all records, but very few files. Hundreds of pictures that worked on my old computer are now showing "empty folder" when seen on my external hard drive and the new operating system.
  I tried all the hidden and sharing files options that have been suggested. I do not erase all images on the disc, and now maybe 6 hundreds of photos show with all records showing as "empty".

  Help, please.

  Hi Carlscott,

  Thanks for posting your question in the Microsoft Community forum.

  From your problem description, I understand that you are not able to find the files on Windows 7, after the transfer of files from Windows XP hard drive to external USB box.

  (1) what anti-virus program you use on Windows 7?

  (2) you try to connect the external USB box on another computer and see if you can find the files?

  You can deal with this problem because of the Virus on the disk external drive or USB key. If you use an Antivirus program on Windows 7, it will automatically delete the files infected by the virus.  In other words, that there is a risk of data loss. You may also experience this problem if bad sectors are found on the hard drive.

  Step 1: I suggest you run this Microsoft Fixit and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Step 2: Download and run the latest Microsoft security on the computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 3: I also suggest to check the hard disk for errors.

  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• How to make several records to reappear after I did accidentally one "delete" in my list of folder on an external drive?

  Help please!

  I accidentally did a right click to remove my files on an external drive. The external hard drive is in my list of files, but none of the folders that are still on it.

  The pictures are always in the folders on the drive and in their records.  I tried an import files for to displays, and LR sees all of them as existing in the catalog, so he knows about the photos.  And LR is the re not important.

  I just want the folders appear again in my list of folders on the left.

  Someone knows how to fix this error, I did? Thank you.

  For anyone interested, I had to add a folder to my external hard drive, then right-click and select VIEW the PARENT FOLDER.  ADOBE's SUPPORT thank you, I'm so relieved, feel stupid, but relieved.

• L750 satellite fails to record the external DRIVE of 1 TB as a HARD disk drive

  Hello

  I wonder if anyone can help with this problem?
  Please excuse the absence of computer terminology!

  I have a Toshiba Satellite L750/l755 (don't remember which) and my external hard drive recently failed to register as a reader. (Samsun Story Book 1 TB)

  For more than a year, it has worked without problem.
  Now, when I turn it on, it shows momentarily as a reader, even to the point of show files that it contained.

  If I'm fast enough, I can even open one of the folders, but then the reference of the car goes with everything, and I receive a notice indicating that 'G' refers to a drive that does not exist.

  Shows Device Manager hard drive external, and all, apparently, allegedly, works fine! I tried to assign a different drive letter, but nothing happens.

  My laptop accepts there is a reader connected, but fails to save it as a reader!

  I tried to use Knoppix to see if that could access it, but can't find where to change the bios to boot from the disk!

  I am at my wits end because I'm to halfway through writing a book and everything is stored on the outside! (Yes, I know now! "It is not safe to do!)

  Please can anyone suggest a solution?

  Thank you very much in anticipation.
  Alec.

  > I tried to use Knoppix to see if that could access it, but can't find where to change the bios to boot from the disk!
  While turn on the power, press F12 to get a menu where you can change the boot device.
  Then you should be able to boot from the CD from Knoppix (or other Live bootable drive)

  But have you tried to connect this drive external DRIVE on another computer?
  In my view the issue looks like problem with HARD drive and no system or laptop issue.

• El Capitan and the external drive is no longer compatible. Why?

  El Capitan upgrade is complete. Now Mac does not recognize my "WD Book Essential external drive" which is not complete. Tried 20 times. Icon WD Book appeared on the desktop once. Bkup began, it stopped! Time Machine displays "Unable to complete backup" and cannot get the icon to reappear on desktop. Stop Mac, unplugged, used different usb port, different electrical outlets... what else?  The USB cords very well. Y at - it an upgrade of Mac to run the connection? Cannot test it on another computer, none are available. BK in last place on 12 / / 15. Help, please!

  It may be a physical problem with the drive. Try this...

  Launch/Utilities/Terminal and copy & paste this command at the command prompt:

  diskutil list

  Press return.

  If it sees the drive, note the number of the disk (left column) that you want to mount.

  Then enter this command:

  Mount /dev/ (number of disk)

  Put the number without parentheses.

  Press return.

  Also can try

  mount/dev / strength (number of disc)