Server with 10 TB LUN attached by physical brutes FC connection works, but second 10TB seems to be limited

Similar Questions

• Conversion of a server that has SAN LUNS attached

  Hello

  Need help.

  I need a file server, which currently has 4 mapped to the EVA SAN drives, each drive is almost 1.6 TB of P2V.

  I also have the CD VMware converter acronis.

  How can I get it work? as I'm not able to migrate the attached SAN LUN due to space issues.

  Any help appreciated...

  How can I get it work? as I'm not able to migrate the attached SAN LUN due to space issues.

  You don't need to convert the SAN disks, ignore those.  NPIV can be used to attach these LUNS later once it is converted.

  Use VM Converter, convert JUST the boot disk for the file server.

• Network Diagnostics says that the connection works but server problems?

  I have Windows Vista on a Lenovo laptop. I recently got a new 2wire modem/router all-in-one of at & t wireless.

  When I connect to the internet on the laptop wireless it says that I'm connected to the internet and when I get on my browser I get a server error. When I go through the window of diagnosis of windows it says that my internet connection is fine. I clicked on the option to turn off my card and plug it in again and my internet works then for about fifteen minutes before receiving once more the server error. Help, please! I have always connected and remained perfectly connected before to acquire this new modem. Another laptop I have is online and remains very well.

  Is this a computer problem? Or a microsoft connectivity issue?

  ·                         Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• How to backup VMs that have RAW LUNS attached with TSMserver v5.5 and TSMclient v6.1 in VCBproxy in a task (backup script)

  Hallo

  I have several virtual machines that have RAW LUNS attached to them.

  Question 1: Is there a way for me to use (free LAN) save those VMS with VCB + TSMserver 5.5 + TSMclient 6.1 - in mode (an automated task - script), which local VMDK disk backup is backup with FULL-level and fasteners LUN RAW to the VM backup files of the virtual machine level. Does the solution support?

  Question 2: Is there a way in a task (separate in the 'pre' and 'post' script) as a single disc with vcb backup - for example when VM have a disk VMDK more attached, only a VMDK disk backup for is a primary partition on a virtual machine?

  Note: Backup free LAN for backup of the VCB proxy any type (level FULL or FILE) is correctly and fully functional.

  Jerome Kovac

  Hello

  Question 1: Is there a way for me to use (free LAN) save those VMS with VCB + TSMserver 5.5 + TSMclient 6.1 - in mode (an automated task - script), which local VMDK disk backup is backup with FULL-level and fasteners LUN RAW to the VM backup files of the virtual machine level. Does the solution support?

  If the RAW format is really a ROW then you can do a virtual RDM and Yes, VCB will save help file or full. If she is not a ROW but a RAW, then only the VMDK can be saved via VCB.

  Question 2: Is there a way in a task (separate in the 'pre' and 'post' script) as a single disc with vcb backup - for example when VM have a disk VMDK more attached, only a VMDK disk backup for is a primary partition on a virtual machine?

  Not only a single disc that I saw that it's all or nothing. If you don't want to VCB to backup a drive, you can mark it independent or if it's a RDM make non-virtual.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• A physical server with 2 NETWORK interface card using a virtual machine as IPS (transparent VM) and everything should work normally?

  Hello guys.

  Is there a diagram that I made, using for my self this question.

  

  As you can see, I have a physical server with 2 NIC I don't want to use a VM (with Snort) as IPS / IDS system for inbound traffic on the management of VLANS. Is it possible to use this VM in this way (as an IPS/IDS, VM with two NIC without any routing work?)? Maybe you have a suggestion, how can I achieve this, as easy as possible? Maybe you have an opinion, what OS unix system do I use?

  Thank you for your time and your answers. Any useful information is much appreciated.

  Yes, it should work. You need to look out for, it's that the 'outgoing' NIC is not connected to the same physical switch as the entrant and that there is no link between these two physical switches, because this would create a loop of layer 2 on the network.

  I haven't worked much with Linux, but I don't see that you would have a problem to find some Linux/Unix with the possibility to bridge two network cards and use some software IPS to inspect the traffic.

• Clone a physical server with converter

  When the cloning of a physical server with converter and selecting Configure the VM when completed does change on the physical server?

  My original physical server becomes inoperative?  I would rename the virtual server and give it a new IP address, but also want to continue to use the original physical server.

  Welcome to the community - but be aware that if you do not want to run two machines on the same network, your willingness to care about the host name and IP address to avoid confllicts.

• Physical transfer Ubuntu Server with VMWARE Converter

  Hi I'm trying to transfer an already built ubuntu 8.04 server to VMWare ESX server with the coverter bootable cd.  When I use the wizard all is fine until I get to the part of the data store and I get an unknown error.  I transfer the logs so that I can display them but cannot do anything about newspapers.  Is it still possible to do, or is there something that I am missing.

  Hello and welcome to the forums.

  You might want to try the Converter 4.0 BETA .

  Good luck!

• How can I delete an email with a too great attachment to the outgoing queue?

  Original title: outgoing mail

  The server for my outgoing (Live Mail) mail limits the size of attachments.  How can I delete an email with a too big attachment of the only outgoing?

  Click work offline, and then delete the message from the Outbox (below the records of account in the folders pane).

• UCS C420M3 server with VIC 1225, can't see the ethernet LOM ports

  Hi Guyz,

  We have C420M3 server with VIC 1225 connected on PCIe slot, with fabric Interconnet.

  After you have installed the OS & drivers, vNIC created the VIC 1225 by the service profile appear, but 4 gig on server LOM ports do not appear.

  Any idea. ?

  Thank you

  If you incorporate your rack server to UCSM, you will be able to use the LOM ONLY ports for traffic of Mgmt, when you join the server mode to 'Dual Wire'.

  It is useless (unless you have one for a special reason, I do not intend at this very moment) to use ports LOM, once you entered the server, precisely because of the 1225 VIC is not a regular NIC card or a regular HBA, it is indeed a CNA (Converged Network Adapter), which essentially allows you to do in a map , what you would do with two (which means "what you would do with a NETWORK card and HBA separated')

  When you have a VIC card, you actually have the ability to create up to 256 virtual interfaces (this is the capacity of the equipment, always limited by the operating system, please keep this in mind), this is the reason why, after the server is integrated, entirely rely on the interfaces in the Service profile instead of the physical interfaces.

  Find more info here:

  http://www.Cisco.com/c/en/us/products/interfaces-modules/unified-computi...

  You have a specific reason to use the LOM ports rather than create 2 additional virtual interfaces in Server Service profile?

  -Kenny

• How to generate the report for LUNS attached to esx

  Hi I m help esx 3.5 with vc 2.5 u 3 .we use 4 host cluster with 25 LUNs and attached to their creation of vm is very common in our production environment testing. can any body tell me the command or how so I can generate report for each lun attached to the esx like size of lun, used, free... second how vm, I on lun perticulr

  VDF h

  should meet your needs

• Web server with CVI

  Hello

  I want to know if it is possible to create a webserver with CVI so that I can connect my application and see the data with internet Explorer?

  Backround: we run a CVI-application on a computer within a network. On this computer, collect US data from different systems and publish these data in a sign of the CVI. Users who want to see the data, connect to the computer with a remote control software.

  Now, we wondered if it is possible to create a web server with CVI. And if the user cannot see the data on his computer using internet Explorer.

  In the forum, we found a few messages very old. Are there new items on this subject?

  Thank you

  Oliver

  As far as I know that it is not supported at the moment.

  And there is the suggestion of product requiring a few laurels ;-)

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.

• I finished the installation of Sharepoint 2010 and he is told to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads

• Change my Win 2008 and SQL Server on the server with SATA drives to the server with SAS disks

  I need to change my disks on my HP Server. Disco SATA Raid 1, I have to pass it to a server with SAS disks

  I haver Windows 2008 Server 64-bit installed SQL

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on MSDN. Please post your question in the below link:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer