Internet connection is lost after 2 minutes

Similar Questions

• The Internet connection is lost after installing Windows update

  Original title: put automatic has caused the loss of access to the internet

  After that the last automatic updates have been installed on the 8/17 or 18, I lost the internet connection.

  I had to restore my computer to an earlier date. When it was complete, I had access to the internet.

  I have reset my updates for having me choose when and which ones who.  When I install the updates, how can I know who we are at the origin of the problem.  In addition, how will I be able to solve the problem?

  Hello

  What is the error when you try to access the internet after upgrades?

  Method 1: Update the network drivers

  I suggest to update the network drivers, then try to update and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  Method 2:

  We can find the update by installing the updates one at a time, the origin of the problem.

  To do:

  1. click on Start, type windows update and press enter

  2. click on check for updates in the left pane of the window

  3. when updates are found, open the list and select one at a time and install them.

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my internet connection is lost during the use of the internet

  often, I find that my internet connection is lost while using the internet.how can solve the problem.

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes before this problem?

  3. what operating system do you use?

  I suggest you to try with the mode safe mode with network and check.

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

• Wireless connections is lost after count is inactive.

  My internet connection seems to be time. After that my counter top has sat idle for about 15 minutes my wireless connection is lost. I have to click on connect and wait until I can get online. I spent a lot of time on the phone with Frontier trying to get help from their Abu this question, but no one can seem to help me. No idea why it will not stay connected?

  Original title: network Ethernet NIC network adapter wireless network device

  After that my counter top has sat idle for about 15 minutes my wireless connection is lost.

  Wireless connection to what?   Sounds like a router problem, so you can get better help a forum that specializes in this (e.g. by the manufacturer, not an a Microsoft support forum).   In addition, some ISPS will not help unless you restore a direct modem connection, if it does not work properly, often so you might be out of luck to get help from this side in any case.

  Good luck

  Robert Aldwinckle

  ---

• HP compaq dc5100 sff: loss of internet connection on desktop after installing windows 10

  Update from windows 7 to windows 10 and I lost my internet connection. My connection is good, the son, all good router. Windows 10 seems to work great except no internet. She said "not connected-no connections are available. So is it not reconizing him actions card built in the Board of directors or what. I tried to reload the drivers. I can use any help I can get. I have a hp compaq dc5100 sff with 3 GHz, computer of office 2 GB of ram. I've updated my laptop and it works fine. If I can't understand, I guess I'll go back to windows 7. Ideals, let me know...

  Ok.

  The only suggestion I can offer would be to install the latest driver ethernet directly from BCM and see if it works.

  I think you need the first driver on the list for 32 bit.

  http://www.Broadcom.com/support/?GID=9

  You will need to manually install the driver for the adapter ethernet BCM in the Device Manager, as the file contains only the driver files and no setup.exe file.

• Internet connection suddenly disappeared after that Win 7 updated today

  Suddenly my Windows 7 computer has no internet.  Seems to coincide with a series of critical updates that were installed this morning.  Also, I can't do a restore for some reason any.

  The network icon shows the connection to my router and indicates that the connection has internet connectivity.

  I can ping my router, but not shoot to the top of its web page in a browser (IE 11, Chrome, Firefox all tried).  I can pull up other computers on the network.

  I can one of Google's servers to 74.125.224.72 ping, but cannot pull it up in a browser.

  When I boot in safe mode with network, the results are the same.

  NO request that goes to the internet, including IE, Outlook, update AVG, etc. can find something there.

  I tried the normal stuff: restart the router, PC.  Tried a restore point, but he failed.  Even if the PC is the router's IP, I did ipconfig / renew to release and rediscover IP.  I disabled the antivirus and firewall to see if it works.

  Any help?  Desperate, because I spent hours and depend on the work of the machine.

  Thank you.

  Hello Jerry,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the internet after Windows Update.

  You can try to follow the link below to run the network troubleshooter, and see if that helps.

  Using the troubleshooter from network in Windows 7

  If this does not help, then you can also try to refer to the suggestions mentioned in the link below and see if that helps.

  Why can't I connect to the Internet?

  Additional information:

  Use Network Troubleshooter event logs to solve network problems

  Wireless and wired network problems

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Internet connectivity is lost every 3 days... restoration of the system, restores connectivity

  I lose the internet connection on my HP Pavilion laptop of series g on all three days.  I have to use the connectivity of the system restore restore (lan & wireless).  This is the third episode of this problem.  Troubleshooting services cannot identify/fix the problem.

  What are the events the choice of system restore show as having passed in the meantime?  Are you aware of all the events as the Windows updates?

• Internet connection is lost

  I just installed Muse 2014 and I get the message shown here:

  

  Similar screens appear in the "Getting Started" and "tips and Techniques".

  My internet connection is fine - what's up?

  FYI

  The problem has been resolved with the last update (2014.0.1.30). Just installed today.

  Thank you

• WiFi connectivity is lost after 12 hours on 32RL938

  Hi all
  I have a very strange and annoying questions on my 32RL938 aruond wifi connection.

  I set up the TV and connect to my wifi at home and everything is very well four approximately 12 to 15 hours.

  After leaving the TV in standby for a while (let s for example during the night) when I start it up again, I realize that, although my TV says it s connected to my local WIFI s there is no access to the drive Toshiba Places or DLNA network.

  The network connection test fails also.

  If I check on the router to the TV has a valid IP address and look connected, but no matter what ping test it s ip fails.

  The only solution I was able to identify this problem is to restart the router.

  After the reboot, the TV connects fine to my network and I can access the Internet on this subject.

  What is very strange, it's my house, I have 6 other wi - fi devices (laptop, phone android, printer, Tablet, etc.) that work perfectly well as my TV shows that there is no link.

  Because the ruter is not in my room it is quite difficult to restart every day.

  Please let me know if you experience this kind of behavior and what could I do about it. I also tried with static and dynamic ip for television, but the behavior is the same.

  > The only solution that I managed to identify this problem is to restart the router
  > After reboot, the TV connects fine to my network and I can access the Internet on this subject.

  For me, it looks like a problem of router and not as a problem of TV connection.

  But you can also check if the latest firmware is installed on your TV

• Connection iSCSI lost after upgrade

  
  After having upgraded my HP Proliant DL380 G7 of ESXi 4.1 to 5.1 U2 ESXi, I lost my iSCSI connection.  Fiber connections are fine, no question here.

  I use the flavor of HP ISO updated via the Update Manager.

  I would be grateful if someone who took this expericnec and is committed to it please share what has been done to solve this problem.

  Thank you

  This is the network driver for this adapter for VMware vSphere 5.1

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3913538&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4141%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The current version of the driver is: 5.0.636 (February 18, 2014)

  It is possible update 2, put in a new driver by default in it or put a driver that simply doesn't work properly with this network adapter.  Is this the only nic you use iSCSI for?

  You should really spread your connections on two just physical NICs wrap one of the network adapters fail so you don't lose your iSCSI connection unless you can suffer a loss to your iSCSI and it's not a big deal.

  Here's the Vmware KB article how to check which version of the driver of network that you are currently using:

  VMware KB: Determine what storage driver or network is actively exploited on ESXi host

  The document talks using the update command to update the driver, but it is my experience that its better to just do an uninstall / install, but you can try the update, assuming that this is a driver update.  I have a feeling it will be a lower version than what is currently in place.

  You will use the following command to install or update:

  software esxcli vib install zipfilenameofdriver d

  or

  esxcli update software vib - v vibfilenameofdriver

  I also found some installation instructions in the zip file

  Hope this has helped

• The Internet connects 'local only' after the regular updates?

  Hello

  My computer has installed its regular updates about a week ago and since then, the internet has had connection problems. It connects to the ordinary router, but it is "local only" and will not fully connect to the internet. The only solution I found to the problem is that my owner to restart the router, which is not the most convenient thing to do whenever I turn on my computer. I have windows vista with all standard Internet programs, and I use chrome. I also have a second windows computer that exposes the same problem, which is running windows 7, which has also installed updates. My roommate's computer is a Mac and is not at all account of all the problems.

  Hello kim90

  Have you tried to use system restore to before it started? If this isn't the case, then follow the steps listed in the link below. I hope this helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• Internet connection is lost in computer laptop and Xbox when I fill the network.

  Original title: the network bridge is being gay

  well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before

  Hello
   
  1. when the question is is produced?
  
  2. you remember of any changes to your machine before the question?
   
  I would like you to follow the steps mentioned below
   
  Step 1:
   
  Instead of bridge, you should be able to share the connection from your laptop.
   
  a. Click Start, click Control Panel
  b. go to your network and sharing Center.
  c. on the left side, click on manage network connections.
  d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
  e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
   
  Step 2:
   
  Disable all security software temporarily and see if the problem still occurs.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]