WiFi - ethernet sharing does not work yet

Similar Questions

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• photo sharing does not work as it should in the Sierra of the BONE

  I took 11 pictures yesterday, and I want to share only 3 of them. I highlight the 3 photos, click on sharing of arrow, and pictures of 11 highlighted.

  Are your 11 photos recently imported into an album, and id you select in an albumen?

  There has been some reports, selection of photos to change the batch does not work well, when photos were selected anywhere, but in the tab 'Photos' smuggled to the full album can be selected, even if not all photos are highlighted.

  Try, if you can select the photos in a moment to share your photos select only.

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Ethernet driver does not work on Dell Dimension 8520 after Windows XP install.

  Ethernet driver does not not on my Dell Dimension 8520. I reinstalled Windows XP and drivers, and everything works except drivers Ethernet and those. They have big yellow points to mark by them. Tried to delete and restart, but they come back and still do not work.

  I don't see anything for 8520 dimension on the Dell web site.  Windows XP for Dimension 8250 drivers are here .

• Realtek fast ethernet card does not work on laptop with Vista

  My realtek fast ethernet does not work with my windows, what can I do about it?

  I have no internet access on my laptop

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• HP color laser jet cm1312 mfp sharing does not work

  Hello, I have a problem.
  The this printer to connect to the server (windows 7 32 bit, latest driver).
  Other users (network) may not print, but after restart server, everything works...
  What is my problem? Help, please.

  Hello

  To understand the issue correctly, try the following:

  1. If all the shared PC are not able to print, check if you are able to print from the server PC.

  If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

  2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

  3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

  4. If the driver on the server is offline, try now to turn off the SNMP state:

  From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

  See you soon,.

  Manjit

• My wifi blackBerry smartphones does not work

  (Sorry if I put this in the wrong place, I'm new).

  Just a little background - my phone was * completely * fuck for more than a week after he had a nice bathroom, but yesterday it worked perfectly, including the WiFi. Today ' today-no WiFi. My computer is always online, so it's not for lack of the router, but the phone tells me that it cannot obtain an IP address. It is also said that it does not connect to the Blackberry Infrastructure, when I check the WiFi Diagnostics. I have given on my monthly plan and I can still use the phone, but my WiFi was faster and did eat my data allowances. More than that, however, I'm just irritated, it does not work. Anyone know what I can do?

  Ah! Forget, restarted my router, everything is fine now. Should have tried that first, really.

• VMWare Tools shared folder code does not compile on VMWare Fusion 7, Ubuntu asked 14.10, and Clipboard sharing does not work.

  Hello

  After the upgrade to a guest of 14.04 to 14.10 Ubuntu, I tried to reinstall the VMWare tools.  The problems I've come across so far:

  Shared folder code will not compile.  I get the following result:

  do: enter the directory "/ tmp/modconfig-ElOCTG/vmhgfs-only.

  Using the kernel build system.

  / usr/bin/make /lib/modules/3.16.0-23-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.16.0-23-generic'

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/message.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/dir.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/request.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsUtil.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/cpName.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/rpcout.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/stubs.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsEscape.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/link.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/transport.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/module.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/file.o

  CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/super.o

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioRead ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:714:4: error: implicit declaration of function 'generic_file_aio_read' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_read (iocb, iov, numSegs, offset);

  ^

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioWrite ':

  /tmp/modconfig-ElOCTG/vmhgfs-only/file.c:786:4: error: implicit declaration of function 'generic_file_aio_write' [-Werror-implicit-function-declaration =]

  result = generic_file_aio_write (iocb, iov, numSegs, offset);

  ^

  Cc1: some warnings are treated as errors

  scripts / Makefile.build:257: recipe for target ' / tmp/modconfig-ElOCTG/vmhgfs-only/file.o' failed

  make [2]: * [/ tmp/modconfig-ElOCTG/vmhgfs-only/file.o] error 1

  make [2]: * waiting unfinished...

  Makefile:1345: recipe for target ' _module_/tmp/modconfig ElOCTG/vmhgfs-only' failed

  make [1]: * [_module_/tmp/modconfig ElOCTG/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/linux-headers-3.16.0-23-generic'

  Makefile:120: doesn't have a recipe for target 'vmhgfs.ko '.

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-ElOCTG/vmhgfs-only.

  The filesystem (vmhgfs module) driver is used only for the shared folder

  feature. The rest of the software provided by VMware Tools is designed to work

  regardless of this function.

  If you want the shared folders feature, you can install the driver of

  running vmware-config - tools.pl again after making sure that gcc, binutils, make

  and your kernel sources are installed on your computer.

  These packages are available on the installation of your distribution CD.

  [Press the Enter key to continue]

  In addition, the shared clipboard does not work.

  I'm under VMWare 7.0.0 on OS X 10.10.

  Any help or advice will be greatly appreciated.

  
  Thank you

  Jonathan Morgan

  The VMWare Tools included with fusion 7.0.1 solved this problem for me (and without any serious regressions I noticed so far, at least, which is nice but not something I intend on with vmware), so probably the next update of each VMware product should include the updated tools.  Don't know how long updates to other products are coming, however.  Wonder if there is a separate place to get just the tools to day?

• VMWare Fusion 6.0.2: Mavericks - Windows 7 Clipboard sharing does not work

  I'm running a MBP, OS X 10.9.2 (Mavericks), VMWare Fusion 6.0.2 with a Windows 7 VM. The elements copied to the Clipboard in one are not properly shared with the other. I went in every parameter I know to try to solve this problem, no dice.

  All known solutions?

  Brad

  Hi Brad,

  1. click on the menu Virtual Machine-> settings, then click on the button of isolation in the Panel settings, Pls, make sure that the two check box (enable D & D, caillet &) and checked.

  2. If the boxes are check, have you already tried to install VMware tools by clicking on the Virtual Machines menu-> reinstall VMware Tools? Can drag you a file from the Mavericks to the Windows 7 VM? No sharing of Clipboard does not work when Windows 7 has just started and no other application does?

• Windows 95 Ethernet adapter does not work

  Hello

  I have created a machine virtual windows 95 and followed the instructions exactly in the link below.

  Documentation for VMware for Windows 95

  However, the network adapter does not work.  I have the latest version of VMware tools installed, but it does not seem to include any network card driver.

  I tried to download the driver for AMD PCNET Family Ethernet Adapter (PCI and ISA) from the AMD website, but that doesn't work anymore.  I have a virtual machine running Windows 95.  However, he created an image of a physical machine.  The ethernet adapter works fine on this machine, but there is no driver installed - does not require a apparently.

  If anyone has an idea on how to make the ethernet card works, I would be eternally grateful!

  Here is the configuration I have for the Windows 95 VM I created:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "6".

  scsi0. Present = 'TRUE '.

  memsize = "64".

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "7Win95.vmdk".

  ide0:0. DeviceType = 'disk '.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. AutoDetect = "FALSE".

  IDE1:0. DeviceType = "cdrom-raw"

  floppy0.startConnected = "FALSE".

  floppy0. FileName = "a":

  floppy0. AutoDetect = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "nat".

  ethernet0.virtualDev = "vmxnet.

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  Sound.Present = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  roamingVM.exitBehavior = 'go '.

  displayName = "7Win95."

  guestOS = "win95".

  virtualHW.productCompatibility = "hosted".

  extendedConfigFile = "7Win95.vmxf".

  IDE1:0. FileName = 'D: '.

  floppy0.FileType = "peripheral".

  floppy0.clientDevice = "FALSE".

  IDE1:0.startConnected = 'TRUE '.

  ethernet0.generatedAddress = "00: 0C: 29:66: ff: 4 d.

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  UUID. BIOS = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  cleanShutdown = 'TRUE '.

  Replay.Supported = "FALSE".

  ide0:0. Redo = «»

  Replay.FileName = «»

  vmotion.checkpointFBSize = "21102592".

  ethernet0.generatedAddressOffset = '0 '.

  USB. Present = "FALSE".

  pciBridge0.present = 'TRUE '.

  pciBridge0.pciSlotNumber = "17".

  scsi0.pciSlotNumber = "16".

  ethernet0.pciSlotNumber = "32".

  sound.pciSlotNumber = "33".

  Try changing line ethernet0.virtualDev = "vmxnet' to 'vlance.

  Once the AMD driver is installed and running, THEN you can try to change the vmxnet driver, by repairing the VMware Tools on the guest.

• Ethernet controller does not work on the Satellite L645D-S4030

  Basically, I got my windows 7 reinstalled on my laptop due to virus... Now I have a problem with the Ethernet controller does not, I checked my device manager and there is a kind of yellow dash through the icon... Someone knows what is the problem and how can I solve this problem?

  BTW, I have a SATELLITE L645D-S4030

  Hey Buddy,

  Hmm generally if you reinstall Toshiba Recovery disk Windows all drivers will be installed too because the disc contains a picture of the factory settings.
  Or you used another drive?

  Yellow exclamation mark can mean that there is a driver problem and so it would be advisable to reinstall the LAN driver. Follow the link Timox. After the driver is installed, restart your computer and check again in Device Manager. The yellow exclamation point should normally be gone.