WiFi ip address

Similar Questions

• My older brother took my WiFi/MAC address. I think he's watching what I do on my iPhone 6. What can I do?

  I started this year at Uni and my older brother has decided it wants to spy on me!
  He asked my WiFi/MAC address and I gave it to him (not knowing what he can do with it)
  Now, he mentioned that he can see the content on my iPhone. He added new devices who say NETGEAR on them.

  Someone can confirm if it is able to see what I do on my iPhone or not?

  If so, how can I stop this from happening?
  I tried to connect to the NETGEAR device, but the password has been changed.
  I'm considering selling my iPhone to buy another one because I read the MAC address on a device cannot be changed.

  Thank you for any comments you can give it

  ISPY1 Regrads

  The only way he can spy on you, is if you share one login to iCloud Apple with him. Find your MAC address doesn't allow him (or someone else) to control anything on your phone. MAC addresses are not secret and do not need to be protected.

• Blocked or delete Wifi Mac address & change to the original iPhone address Wifi 6 more

  Please change address of Mac Wifi on my iPhone camera Plus 6 and secure it will solve.

  someone hack my connection to internet initial IP address.

  I want to know what the actual address iPhone wifi 6 Plus.

  Thank you.

  The address real wifi to your phone depends on the address given by your router, unless you tell us what it is that we cannot know the answer to the question.

• WiFi Mac address

  I was wondering if someone took the time to look at the Mac address of WiFi. I use a MAC filter on my router here at home, so I was going to plug it in, but that there is no Mac address.

  Mark is that done on purpose?

  Thank you

  Scott

  Settings > about phone > status > address MAC WiFi

• Is it possible to get the Wifi MAC address in the program?

  I went through the api of the RIM, but I have not found anything either can achieve this, so is it possible tho? Anyone has idea abt this?

  There is no BlackBerry API read the MAC address of a wireless connection.

• WLAN is missing the MAC address and can not use WiFi

  After an important virus corrupt my system, I got everything running except internet Wifi access.

  The configfree detects the unit, Wireless 2200BG, which is enabled and the latest driver downloaded from Intel, but he said nothing to the MAC address.

  IPCONFIG displays the wifi MAC address and loading upward it says wireless networks detected but it can not always connect.

  Configfree using I get error message c-15, c-16, c-16.

  I can hard wire to the internet using the LAN.

  IM using XP Home

  Ive took the wireless card, reinstalled, deleted, and updated.

  Any help would be appreciated

  Hello

  Have you checked the TCP/IP protocol settings?
  Do this!

  The settings are located in:
  Network connections-> network connection WLan-> properties-> Protocol TCP/IP-> properties

  There you have to make sure that settings such as; obtain an IP address automatically, get the DNS should automatically be marked!

  PS: The router must has disabled the mac address filtering!

• How to get address IP WiFi BlackBerry 10

  I want to get the WiFi ipv4 address in blackberry and write these codes that are referenced in others as below, it worked in my Dev Alpha C but I have no other devices to test.

  However, it doesn't seem to work in the Z10 or Q10.

  Is the interface of network, also called "bcm0" in the Z10 or Q10?

  Is someone knows it this problem?

  Thank you.

      foreach (const QNetworkInterface &interface, QNetworkInterface::allInterfaces()){
  
              qDebug() <<  "humanReadableName: " << interface.humanReadableName();
              //if(QString::compare(interface.humanReadableName(), "en0") == 0){
              if(QString::compare(interface.humanReadableName(), "bcm0") == 0){
                  foreach (const QNetworkAddressEntry &entry, interface.addressEntries()) {
                      if (entry.prefixLength() <= 32){
                          wifiIP = entry.ip().toString();
                          qDebug() << "IPv4: " << entry.ip().toString();
                          return true;
                      }
                      else
                          qDebug() << "IPv6: " << entry.ip().toString();
                  }
              }
          }
      return false;
  

  Oddly enough, I wrote this yesterday for an extension WebWorks

  Here's the skeleton code

      netstatus_interface_details_t *details;
  
      if(BPS_SUCCESS == netstatus_get_interface_details(NULL, &details)) {
          netstatus_ip_status_t nstatus = netstatus_interface_get_ip_status(details);
          netstatus_interface_type_t ntype = netstatus_interface_get_type(details);
          bool nisconnected = netstatus_interface_is_connected(details);
          bool nisup = netstatus_interface_is_up(details);
          const char* nname = netstatus_interface_get_name(details);
  
          int nipcnt = netstatus_interface_get_num_ip_addresses(details);
  
          for(int i=0; i
  I wrote cela for retooling as an extension that it collects all data simply and then throw it all away (I just saw in the debugger)
  Specifically, you need store IP addresses nipaddr gets in the loop, if nothing else
  A few above who are important pieces of info
  nisup - if the network device is active
  nisconnected - is it connected to a network
  nType - if you get a result WIFI (search netstatus_interface_type_t in dox for any possible return) you WiFi
  nStatus - connection info (look to the top of netstatus_ip_status_t for more details)
  There are three possible results
  The first runs aground (no network at all)
  The network ntype is not WIFI (also bad)
  The INVESTIGATION period gets collected and you can use it
  Note that you will have at least two survey periods while yu needs to work which is ipv4 and ipv6
  Personally I'll just regex them
  ^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$
  
  The above is easy to do in JavaScript and identifies an ip4
  Oh - ipv6 that comes up is the linux full log xxxx:xxxx:xxxx:xxxx % dev
  You can do a sanity check on the ssid but I ain't got that far yet (I don't need it)
  		   

• Adding an Apple TV 4 to one address active MAC network, what a task.

  Not sure if this is the right place to post this.

  I helped someone get their 4 ATV connected to a network address mac-compatible. Normally it's pretty easy. WIFI MAC address are on the box or the documentation. Not so in this case. How Apple has it set up I could not just go to "Network' page blah blah" About"page and get the address. I had to actually connect the Ethernet of the ATV in the router and then access the routers GUI to get the Ethernet address and then add this address to the allowed devices and continue with the implementation.

  Once I get it set up when connected via Ethernet and "update" the ATV went to find the MAC address of WIFI and even, it was a bit a task, lol. Of course I had to unplug the Ethernet to find, but when it appeared he ended up at the bottom of the page almost not visible and this page won't let me scroll down to exit the faded area, that is. Incredible. At least, I found and could add to the list of devices 'allowed', lol. Maybe there is an easier way, but I'm not hang something like that every day it's like a new learning experience, whenever I'm helping someone hang one of these devices.

  I could not use my iPhone for the configuration because I needed to add the address ATV4 to the network wifi enabled devices. Also, I could not use the iPhone to the owner because it fell recently and has connection "issues."

  I hung it in the end and work and maybe this can help someone else.

  Does anyone else have experience? Is there an easier way?

  I'm still learnin'

  quick way to disable mac filtering connect and use airport useful app on a computer or ios device to check the mac address and enter him and enable mac filtering, and add address mac

• IP guard address switch back to wrong address

  I have a laptop whose returning custody 192.168.0.91 on WiFi IP address or 192.168.0.93 with Ethernet and router to 192.68.0.1. The address should be 192.168.1.xx and the router 192.168.1.1.

  If I open/close the WiFi or to renew the lease, the right address is displayed temporarily, before returning to a bad.

  The system was on the Mavericks. I just updated the machine to El Capitan, but that made no difference.

  Any suggestion is welcome.

  TIA.

  It seems that you may have more than one DHCP server on your local network.

  What is the basic configuration of your current network? In other words, what is the brand & model of your modem, gateway or router? You have a dedicated server or another client on the network that provides the DHCP service?

• iPhone 6 does not connect to some wifi routers

  Hi gurus of the Forum.

  I hope someone can help with this weird wifi problem I have on an iPhone 6. The phone is running iOS 9.2.1 (latest version) and I'm in the United Kingdom. The phone has been connected to my home router, which is a Hub of sky and works well, I hung up for 5 minutes and then went back to it and the wifi connection was gone. I tried to reconnect and he would not find the router. I've tried everything to fix the problem but no luck. Now here's the weird thing in the household, we have another iPhone 6 (iOS 9.2.1), a 5 s iPhone (iOS 9.2.1), 2 x iPads, MacBook Air, and all these have no problem of wireless connection to the router (Sky hub) and connect to the internet.

  In my investigations (using neighbor routers, public routers, etc.), I discovered that the phone does not detect blank sky hubs hubs, hubs of Talk Talk, an iPhone 6 set up as a personal hotspot. Wifi looking for networks but not found. However, the phone WILL find and connect to networks and hubs BT so I know that the phone's wifi works perfectly OK.

  To try to solve the problem, I did the following: -.

  1 reset the phone (hold down Home and Power)

  2 reset the router

  3 reset the 'network settings' on the phone.

  4 erased the phone and set up as a new phone (still will not find the router)

  5 restore an old backup.

  6 disabled 'assistance to wifi '.

  7 disabled "wifi network" under the heading Privacy > sites > System Services.

  8A tried to manually enter the SSID and password of the router on the phone.

  9. manually entered the device and wifi MAC address of the router

  10. banged my head against a brick wall - has not helped and I had a sore :-) head

  So in my opinion, I tried everything what can be done to solve this problem, but nothing helped, so I come to the community to beg for help.

  I read something about iOS 9.2.1 having wifi problems, but I will reiterate, the phone was working fine and then stopped without reason. I have also other phones running 9.2.1 with no problems.

  Please help as my head becomes painful overall hit.

  Thank you very much in anticipation

  Steve

  PS please don't waste your time and your mine responds telling me to do the things that I've done - thanks.

  Hello

  Anyone have any ideas? I am all of them.

  Thank you

  Steve

• OfficeJet 8620 two problems one) Win7 firewall connection wifi and b) the printer multi-network

  Bought the printer this afternoon and set up a computer - connection to a printer with wifi as advised in the closed paper work and CD. No problems.

  When I put it in place of the second computer (with wifi) using the CD provided, I received an error message that the hp software can see the given IP address printer but he could not automatically connect using the "typical connection method. Tips in the dialog box has been to change the settings of firewall computer method of 'typical connection '. Any advice on what this might be. Looking at the Win7 firewall, all HP printer software are checked for the home network and the public. What else the firewall must Win7 allow to operate the automatic printer connection?  BTW, I followed the advice of the installation software and punted for the moment. The warning by the software that was if the printers IP address changes, I'll have to manually change it into the computer with the firewall issue (ugh).

  That leads to the second problem:

  A couple of my computers are ethernet only. No wifi. When I plug ethernet to the 8620, it defines an IP address for itself on ethernet, but he abandoned the wifi IP address. How can I feel some ethernet connected computers and some wifi connected ones.

  Any constructive advice is VERY WELCOME.

  I apologize in advance if there is already a solution posted either of these problems; I couldn't find searching them the forum.

  Lenny W.

  Hi lennyw07016,

  Thanks for letting me know that worked for you.

  I suggest the setting up of a static IP address. In this way the router will always assign the same IP address to the printer.

  Printer does not keep the wireless connection.

  Proceed to Solution 3: printer of the assign a static IP address.

  Here is a document for configuration of a firewall to allow a connection with the all-in-one Windows.

  You can check if you like.

  Thank you.

• Download Patch lobotomisees MS Office from my wife.

  Following a Patch MS download on 25 November, 2009 (21:27) and in order to install, stop turning my wife on poster desktop unable to find the configuration files.  The office is a HP Pavilion running Win XP Media Center 2005, about 2 years old, used for business and home computing.  After prompts on the screen, the desktop itself... restored to the original OEM model.

  Prior to that, there is no casual software download, no games (all removed from office long before that) and no music or video downloads.  We _were_ to Outlook help of MS Office 2007 for my wife company emails.  Verification of desktop computer hard drive showed that MS Office 2007 is present, as well as the original Microsoft Office 2003 60 day free installation.  However, none of the Office 2007 applications will run, including of course Outlook.  The original configuration, Outlook Express 6 executions of 2004, and we can access the Earthlink info server, consult your address address of the e-mail account and send and receive e-mails.

  However, Outlook Express does not see desktop version of woman's wife Outlook address book.  Research online for address book entries and the manuals available to Outlook 2007 indicates that I need the associated *.pst files.  A search for files *.pst under C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\Outlook shows two files .pst Archive (615 305 KB) and Outlook (310 017 KB).

  My questions:
  1 as MS Office 2007 does not work (although all files are intact with the exception of the configuration files that allow *.exe files to run), if I remove and then reinstall Microsoft Office 2007 this process will eliminate these two .pst files.
  2. If a reinstallation of Office 2007 does not remove these two files *.pst, when I begin to set up Outlook 2007 which we do I have to restore the address book?

  Thanks in advance.

  Bill

  However, Outlook Express does not see desktop version of woman's wife Outlook address book.

  Outlook (OL) and Outlook Express (OE) are not the same application.

  OE does not use the data or files PST of OL. OE contacts are found in the Windows address book associated with a given OE identity. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to ping IP address / resolve hostnames Win 7 and XP Pro

  My setup is as follows:

  EchoLife HG521 router WiFi - IP address: 192.168.1.1
  Win XP Pro - address IP 192.168.1.3
  Win 7 Home Premium - IP: 192.168.1.4
  Ping 192.168.1.3 to 192.168.1.4 = Request Timed Out
  192.168.1.4 to 192.168.1.3 ping = Destination Host Unreachable
  The use of firewall in KIS2012 - same result with the firewall disabled on both machines.
  Network discovery is on Windows 7 and the relevant services are set to automatic on both machines.
  Router is able to ping both machines.
  Both machines are set to the same workgroup name.
  Please can someone help? Thank you very much

  Hello

  Try the methods below and see if it can resolve the problem.

  Method 1:

  Reset TCP\IP [Transmission Control Protocol of Protocol\Internet]:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Method 2:

  Disable the IP helpdesk:

  (a) hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  (b) scroll down to the IP assistance service, right-click on it and select Properties.

  (c) in the area drop-down list that says "Autoc" or "Manual", set it to disabled and then click 'apply '.

  (d) then click on ""Stop " to stop the service from running in the current session"

  (e) click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall which will remove off the computer."  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE:

  You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link:

  http://support.Microsoft.com/default.aspx/KB/928233

  Important:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• Change of MAC address each time

  A colleague has a Jade S55 liquid Acer.
  Whenever the S55 connects to a wireless accespoint - wifi MAC address change.
  Is this a known issue or bug (Android)? Whe needs a MAC address for MAC filtering.

  It seems a problem android:

  https://code.Google.com/p/Android/issues/detail?ID=23330

  by the way, have you tried to do a factory reset and check if she always changes?

  data/backup of the settings reset & reset/factory

• Spectrum of HP x 360: how to assign the static IP address

  Seeks to use my Wi - Fi business, I need to use a static IP address, as well as the WPA/WPA2 PSK security password.  I can't find where to enter the static IP address.  I think I may also need to modify the DNS 1 address and gateway.  Can tell me where to access these settings in any case? Thank you!

  My Wi - Fi works perfectly at home, which does not use a static IP address.  Also, the laptop shows the work of network WiFi SSID and tries to connect to it, but can't since I did put in the settings above.

  @BlueCyclone

  Take a look at the following: Static WiFi IP address

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.