WIFI will not be activated

Similar Questions

• Windows will not be activated

  Desktop HP-P2-1343W
  Product number: H3Z09AA
  E2-1800 APU/Radeon AMD
  64-bit Windows 8 (OEM preinstalled)
  Product ID: XXXXX-XXXXX-XXXXX-XXOEM

  The acquisition of the new system in a few years. 8.1 update when it came out. I had a problem a few weeks ago. Had a malware and had plenty to get him, but when I rebooted, it wouldn't take my key (error code: 0xC004C003).

  Got the new key (OEM product key) and Support HP recovery discs, it will take the new key (.. .and other full recovery with discs), but will not be activated. After a few hours, I get the message "Activate Windows". Also of no no to 8.1 again.

  Microsoft technical support (CAT) said I needed a file ISO OEM because my version was a commercial version! (But it was preinstalled) Don't know if he misunderstood!

  Tried to get a reminder of support for MS, but waited a whole day and still no call. will try again when I get the chance and the time to wait, but was kind of busy, so much going on right now.

  What I've missed and what can I do?

  Suggest that you call HP since it is society which you provided with the recovery disk. With respect to the key, it should be part of / embedded in the recovery media, check this with HP.

  J W Stuart: http://www.pagestart.com

• I have CS3 on my current computer and he's dying. I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  Anna,

  It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems.  You can check this link to check systems, it is designed to work:

  System requirements | CS3 product points.

  Guinot

• Satellite L300D-13R (PSLB0E) - Wifi will not turn on FN + F8

  Hi all

  As stated above, have rebuilt my laptop and loaded the following drivers of www.toshiba-tro.de:

  Toshiba common module
  Touch Pad Driver
  Press the start/stop utility
  Toshiba Utilities

  For example, I can hit FN F6/F7 and it changes the contrast of the screen, but when I try to activate the wireless (FN F8) nothing happens. The FN on the keyboard lights when I hit him. The Wifi button at the bottom of the laptop is also activated.

  Someone has ideas which driver I'm missing?

  The latest version of the wireless LAN card driver is also responsible (Realtek RTL8187B Wireless 802 11b / g 54Mbps USB 2.0 Network Adapter).

  I remember having to rebuild the laptop before and find this driver/utility was a nightmare.

  Would appreciate any help/suggestions on this.

  Thanks :)

  Hello

  If the other FN keys work correctly then it means that your WLan driver is not installed and it's why the WiFi network can not be activated properly.

  As you say the laptop seems to be equipped with Realtek WLan 802 .11b/g (RTL8187B) card. You can download the Realtek page directly or portal Toshiba Wlan driver:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista will not be activated. I'm unable to activate by phone.

  Why not line activation sms enabled windows, activation of the phone is very expensive

  original title: activation of sms line

  I see no reason why your system should not turn on correctly.

  What happens if you try posting at www.microsoft.com/genuine/validate ?

  It must pass.

  Otherwise, go to the Diagnostics page - www.microsoft.com/genuine/diag and see what it has to say.  Follow any instructions on the adjustments of the system on the site of diagnosis and then try validation again.

  Once validation passes, try the internet activation once more - if it still doesn't work, then you will * have * to use activation by telephone and speak to an operator.

  You can try to resolve your problems with the updates of Windows in a better forum, in your own language - look at the top right of this window and change the region affecting your own (Taiwan?) - then go to Windows updates to the forums there.

• a2109-a dropped connection wifi will not reconnect

  Hi guys,.

  I was hoping you could give me some advice?

  My ideastab a2109a has abandoned the connection to my office wifi. I got the time to code 4 or 5 wifi and it will not authenticate and reopen it. the desktop and my phone do not have this problem. Can you please suggest a solution?

  Thanks for the help. It's all sorted out. It ends up being on the list of blocked router so I just had to add to the list.

• Windows 7 will not be activated. With the help of a legitimate license key.

  Windows 7 will not activate... With the help of a legitimate license key.

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

• The screen resolution is not more than 1152 x 864 resolution and also Aero will not be activated

  I recently had a problem with hard drive in my Dell Inspiron N7010, and I need to replace the entire hard disk. After that, I bought windows 7 using the disc I had, and Windows 7 (pro) installed fine. However, several things happened. For some reason, my monitor won't go on a resolution of 1152 x 864 on my monitor 17 "! He's used to, but now it won't. Windows 7 also will not let me activate aero, because it says that my graphics card does not support it! (I know for a fact that he did it, because I haven't changed since I replaced my hard drive, and aero worked fine then)

  If there are fixes to these issues, I would gladly appreciate.

  Thank you!

  Original title: problems with Windows 7

  Uninstall the graphics driver complete by using Device Manager. Then download the appropriate drivers for two links...

  http://FTP.Dell.com/pages/drivers/Inspiron-17-N7010.html#video

  OR

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-17-N7010/drivers

  -

  Concerning

• Acrobat cc will not be activated after registration

  I've subscribed to acrobat dc but will not activate. Tells me always that I stay on the 30 days trial version.  I signed out and signed in to my account online with no result.  The profile of my account shows that I'm subscribed to the plan.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• After replacing my motherboard in my HP system, Windows will not be activated.

  Activating a computer you already enabled...

  I have a hp motherboard went blewy, when I reinstalled another motherboard with all the same stuff he told me that I had to activate windows, wouldn't let me open a session and can not get telephone service to make his case either, it's hp that came with it installed and worked upward until the MB went up in smoke... can you please help?

  Hello

  The system is HP, and very probably the OS is OEM. As the motherboard has been replaced the operating system sees this as a new system. You will need to buy a new copy of Windows or contact HP for the media.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  http://WWW8.HP.com/us/en/support-drivers.html

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• HP pavilion g6, feature WiFi will not turn. light stays amber.

  Hello

  My hp pavilion g6 laptop stopped working WiFi suddenly.  I get an error that says the ability is disabled and LAN is not connected.    I press the f12 key to turn on but nothing works.   Help, please.  Thank you.  The witness remains in yellow does not change to white after pressing f12.

  It's a pc hp laptop pavilion g6-1b59wm

  I have 7 Home premium havewindows

  Product: LW354UA #ABA

  Regulatory model: REPLACEMENT - 194C

  In the research and who desire to be this resolved as quickly as possible, I found my own solution. I do not know for how long but... Here's why.

  The problem seeemed in HP connection manager, I went into preferences and activated the wifi via here.  The amber light turned to white.   I tested and it was able to connect to my email.   (YAY!)  and have access to the internet.   I use hotspot and never had a problem with it before, and now, I have also this laptop that I use for this post, and also out of my access point.    the reason why I'm saying that I don't know for how long is this...

  HP connection manager is always read that Wi - Fi (Wireless LAN) is off - still my light is white and I am able to go online and sign up to my email.     ?????

  Thanks I solved my own solution to this. YAY! I'm so happy and excited, happy and proud at the same time. Way to go me. and Yes, BRAVO for me also.

• It will not be activated!

  I bought a new laptop without OS, so I bought the windows 8 pro, I installed the 64 bit, while installation, it asked for the key and I wrote it down and everything was fine.

  When installation is complete and the windows started, he was asked to write the activation key, I wrote it down, and then a message appears saying me "wrong key, try again or write another key!

  How can I solve this problem?

  Thank you very much

  No, no, unless you buy a copy retail Windows 8.1. This will always be the case whenever you need to reinstall Windows 8. In the future, you can try to make a System Image and use it to reset your computer.  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer