WiFi works not once I close the lid

Similar Questions

• Windows 8 do not sleep when I close the lid

  I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

  What can I do else?

  Edit:

  I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

  is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Monitor not turns off when I close the lid!

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

  You can download the manual in PDF HERE.

• Close the lid on my laptop and continue to work on the external monitor.

  I am running Vista on a Dell Studio. I have connected external monitor. I would like to close the lid on the laptop and continue to work, but the com puter shuts off when I close the lid. I have a Dell Inspiron 6000 with an options for no action when the lid is closed.

  Hello

  Control Panel - Power Options - Choose top left - close cover.

  Also check the power Plans it after changing the Panel above - or to the right
  (White) Change Plan settings and also check the advanced settings.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer will not be put into hibernation when I close the lid

  I have a problem with my laptop. It is a series of Toshiba C55. When I close the lid it will not be in hibernation, even if I set power options to do so. This happens not all the time, but it happens enough that it's boring. If I close the lid and it will not be in hibernation, which means that it is in danger of overheating if I put in my backpack. If I use the start menu, it just goes to the lock screen, that's what I suspect it is when I close the lid. Help on that would be great.

  Hello Michael,

  Please keep us updated on the status of the issue.

  I appreciate your time and your efforts.

  I suggest you to update BIOS and drivers from the chipset and check the issue.

  Please update the chipset drivers from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/tc50157200c.exe

  Update the BIOS from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/scf6v140.exe

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of the

  the settings are at your own risk.

  I hope this helps.

  Thank you

• Satellite A100 - options to close the lid for the laptop are not available

  Hello
  I have a Toshiba Satellite A100 - it came with Vista - I carefully cleaned the HARD drive and installed XP - I deleted the partitions etc. and started with a HDD in a perfect state of cleanliness.

  Then, I downloaded all Toshiba drivers that are available for my model.

  When I close the lid it still fully powered - there is no option to go into sleep mode, Hibernate etc in the options of "close cover" - the only option is the "status quo".
  How can I get the standby extended/standby/power options back?

  Your help would be appreciated

  Helen

  Did you installed Toshiba Power Saver utility?
  These options that you can find.

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!

• Computer locking when I close the lid

  I have a laptop sony vaio vgn-aw290. When I got it after you have configured the fingerprint reader it would lock the computer when I closed the lid. If I close and open it immediately and it would make me a password. He wouldn't buy support standby or hibernation, it would simply lock the computer. recently, we went to panama, fl on vacation and this feature no longer works. don't know why or how or exactly when. I looked through the settings and power options and may not know how to re - set parameters to lock the lid closed. I also have an HP that has begun to stay unlocked when I close the lid. I would like to know how to configure it to crash when the lid closes, so I don't need the screen saver locks with a password to send it in stand-by or press win + L before I close the lid.

  Hi Mr. Folse,.

  Thank you for visiting Windows Vista Microsoft answers forum.

  You can follow the procedure below to change the Power Options.

  1. Click Start, then Control Panel.

  2 double click on Power Options.

  3. under "Advanced", set the option "When I close the lid of my portable computer" according to your preferences.

  If the steps above fail then I suggest to run a system restore to a date when the option was working properly.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• When I close the lid and open it again, my computer freezes

  Original title: back to zero problem

  I am running Windows Vista Home Premium on a laptop ACER 5570. When I close the lid and open it again, my computer freezes. Just a black screen and nothing that it will restart. I have to close it using the power button, and when I try to launch again the computer does not start upward. I need to reboot with a Vista startup disk. What is my problem?

  Have tried to take the battery out and restart, but no go.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  Try to perform the commissioning of repair and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• laptop stops every time I got close the lid

  Hello

  I have a Presario C700 laptop, whenever I close the lid of the whole computer has recently

  to restart when I open it again. Sometimes a message appears saying its audit of the

  discs, but then the same thing happens right after.

  Help, please!

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Part of this process will require a reboot to check the disk.

  When this process is finished, stop the laptop again.  Then typing away to f10 as soon as you press the power button to enter the menu of the bios.  Under Advanced Options or diagnosis tab, you will find the possibility to run tests on the hard drive and memory.  Launch the two tests and post back with the results.

  Kind regards

  DP - K

• Game "Faery-Legends of Avalon"-"a problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available.

  I downloaded a game from microsoft called 'Faery-Legends of Avalon', I am currently running Windows 7 Professional. I can't play the game. The game turns on but when it gets to the part where you enter a character name, I get the answer that ' a problem due the program to stop working correctly, Windows go close the program and notify you if a solution is available. . Is this not compatible with windows 7 pro game. I just installed pro about a month ago and this is the first game that I downloaded from the installation.

  Moved from feedback

  Hello

  1. is this problem confined to this game here?

  2. have you checked if the computer meets the system requirements for the game?

  System minimum requirement for the game:

  * Operating system: Windows XP / Windows Vista / Windows 7

  * Processor: Intel Core 2 Duo E6600 2.4 GHz / AMD Athlon 64 X 2 Dual Core 5800 +.

  * Ram memory: 2 GB

  * Of hard disk space: 4.5 GB

  * Video: nVidia GeForce GT 140 / ATI Radeon HD 3870

  * Sound Card: DirectX Compatible

  * DirectX: 9

  * Keyboard / mouse

  If your computer meets the system requirements, then I suggest you to try the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Check the event viewer for the event logs for the exact error message and the cause of the problem. The event viewer will give you all the information about the cause of the problem.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• Computer stops whenever I close the lid

  I have a 5510 accuracy is around the age of 2 months with 10 Windows installed on it.  In 2-3 weeks he started close subject when I close the lid.  Of course, I never close the lid and save open it immediately, it's usually hours later or the next day.

  My settings specify that when I close the lid it falls asleep on the two battery and plugged in, but now it's apparently close because when I re - open the cover later it's start.

  I saw another post that mentions trying several things like updating video drivers or do some diagnostics on the hard drive.  What should I check first?

  Hi KLIEMOHN,

  This happens with or without the adapter plugged? Is there the bluescreens / system breaks down? The pilot light and manual standby modes work fine? The system into hibernation and turn very well?

  Update the BIOS - http://dell.to/1U2Js3b

  Create a system restore point.

  Reinstall the chipset and video drivers from the same site above.

  Go to control panel-> options-> to modify the parameters of plan-> change advanced power-> sub sleep settings - disable hybrid sleep - under the power buttons and lid-> check lid close action settings - apply and ok

  Restart the system and check that it works very well.

  Create a new account admin and check - http://bit.ly/1JoFhcw

  If the problem is not resolved, restart the system and press f2 to enter the BIOS - close the lid and open again and check if the system stops, and it stays on in BIOS mode.

  Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

  If the system is under warranty, write me a private conversation with the service tag, your name and e-mail address.

  Keep us updated.

• Satellite Pro L10 begins to if auto close the lid

  I've got a L10 running windows xp profesional. The problem I have is after the laptop is off and I'm going to close the laptop top restarts.

  Hello

  What?
  Are your sure that you do not use the option "restart" your laptop?
  The Windows operating system contains the closing down, and then restart the option.

  The other possibility is that the parameters energy saver is defined to start the laptop.
  Please open the energy saver and check the option "when I close the lid.
  But it's very strange because you can configure this option only in sleep or Hibernate mode.
  However I recommend you this feature and if necessary set it to no action