Win 10 guard reboot

Similar Questions

• my computer will not defrag... Guard reboot

  Computer will not defrag guard reboot... why

  Hello

  Check the hard disk for errors.

  Follow the steps of

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• New SSD does not-Satellite C55 - A - 1DC guard reboot

  Hello

  Since 2 days I have the Toshiba Satellite C55-A-1 ms.

  I couldn't get used to Windows 8 and found the drive to slow down. So I formatted the disc ssd of my old laptop, so it was clean and empty and then put it in my new Satellite.

  Once I put it on the bios in MSC mode I managed to install Windows 7 64 bit.
  Installation went fine but now guard restarting my laptop.
  To power up, I see the Toshiba screen, after a black screen runs, then screen Toshiba still followed by screen black etc etc etc keeps going like that.

  I tried to install windows with AHCI mode and compatibility mode.

  The SSD is a Sam + ung 840 series 120 GB.
  Worked fine in my old A + er sucks (got 3.5 years ago)
  so I just assumed it would work also in this Satellite.

  I hope someone can help me solve this problem, otherwise I have to share in this laptop for another cause of the brand, I have an ssd inside.

  Kind regards

  To be honest, I see no reason why this is happening. Have you tried to install Win7 once more? If Yes, the same thing happens again and again?

• Equium A100-300 guard reboot

  Hello

  I have an equium A100-300 that reboots intermittently, I took on the radiator and the fan and clean them as well as the new fat heat, I reformatted hard drive. When I can get it up and running everything seems fine, but then it restarts itself, a few times continuously or intermittently.

  Sometimes when I disconnect AC power that I can get it to boot with just the battery, and vice versa sometimes it starts not high at all, it seems as if there is a bad connection somewhere but I have checked everything and can't seem to find anything wrong.

  Any response would be appreciated

  Yvonne

  Hello

  My boot unit didn t die for lack of memory, one of the two modules was defective.
  I ve replaced the RAM and my laptop started again

  Maybe it s worth to check the RAM also

  Welcome them

• Bootcamp on my mac with win 10, after reboot, nothing happened?

  Help me please,

  I have following the statement as it appears on several tutorial on youtube, apple support forum, etc.

  I download windows 10 x 64 ISO on windows web

  then I plug the sdhc with my card reader into the usb drive

  Open the bootcamp assistant.

  Start and take me so long too start.

  After it's over, ask me my password and split my partition.

  After I finished my reboot of the operating system but nothing happen

  in the statement, it must be restart then restart in the windows display, but mine is open again in my OSX display

  and my drive to divide it into 2 partition: 1 macintosh 2. BOOTCAMP

  I did restart and hold the keys when his chime option, but no option under windows, just 1 option of OSX.

  What should I do?

  I did many restart and stop (even maximum reboot or restart whateve NFC people told me) and now take me much time to open my mac now.

  My macbook is in late 2013

  OSX EL CAPITAN 10.11.1

  Please someone help, sorry for my bad English

  Please kindly give me another statement with the simple word, I'm not good with my it skills.

  Thanks before,

  You need a USB2 flash drive, an SDHC card is not supported by Windows Installer, see also Boot Camp: install Windows on your Mac and https://help.apple.com/bootcamp/assistant/6.0/ .

• Blue screen error...! __pc guard reboot...!

  IT IS NAJLA PROB PLZ HELP ME ASAP

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA80031F84E0
  BCP2: FFFFF8800495B6C0
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\021710-23031-01.dmp
  C:\Users\KiTcH\AppData\Local\Temp\WER-44828-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Install BlackBerry preprocessing support message box, guard reboot

  Hello

  Whenever I started a new project of BlackBerry, and created the first file, I got a message box with a title in the title of the subject and the message: "BlackBerry preprocessor is configured. Eclipse will restart to take effect and re - build the workspace. «,

  Eclipse then reboot and after reboot message box show again and restart, keeping the foreaver reboot!

  I got this package full of BlackBerry's official website as: BlackBerry_JDE_PluginFull_1.1.2.201003212304 - 12.exe

  versions:

  Eclipse: Build id: 20090619-0625

  net.rim.EclipseJDE_1.1.2.201003212304 - 12

  NET.RIM.ejde.Feature.componentpack5.0.0_5.0.0.25

  Thank you all,

  I found a solution, in the eclipse.ini replace this:

  -Dosgi.framework.extensions = org.eclipse.mtj.core.hooks

  TO:

  -Dosgi.framework.extensions = org.eclipse.mtj.core.hooks, net.rim.ejde

• Win 7 guard dropping my internet connection

  I recently upgraded to Win 7 and it will not keep an internet connection. I reset my router, I updated my drivers, I ran the convenience store that says 'the default gateway is not available' and then he said: fixed it, but it will not be a few minutes before it loses the connection. Any help would be greatly appreciated!

  Hi Amrita,

  Thanks for your quick response. However, I tried what you suggested and it did not work. When I entered the IP reset command command promt that he told me to run in Administrator, which I am. Another thing I read somewhere that these instructions were pretty much everything up to Win 7. Another piece of useful information is I hope I have internet connection so long I just do e-mail and watch sites, etc.. Its when I try to watch a video or anything with a lot of bandwidth that it loses the connection down to local only. And I know it has nothing to do with all the material, because he ran very well when I had XP, then I upgraded to Vista and it worked fine then, but as soon as 7 is out I've updated for her and that came when the trouble started. Once again I would appreciate help. Thank you.

  You see a failure of the device driver for your device connection. You can try the Vista compatibility for this Mode, or looking for Win 7 drivers.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Tungsten E2 guard reboot over and over again

  I get the 'Palm Powered' screen for about 10 seconds then the screen goes black and I get the same screen again. I can not turn off either.

  I believe the last update, I installed was this one http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/, /? St = 332, E = 0000000000240141675, K = 4574, Sxi = 1, case is obj(15221) and he said to hit the reset button on the unit once it has been installed. I did, and now it keeps restarted again and again and again...

  Help, please! I can't believe I've bricked my device. He seriously feared for losing what I use it for reading ebooks and play music, among other things, while I'm on the road.

  You will need to locate your records /Backup on your PC in the Palm directory (in C:/Program Files / your Hotsync name shortened /) remove the program from the record of the cause of the problem, or just rename the whole/Backup folder to something like /BackupOLD.

  Next HotSync (after you do a Hard Reset) will bring back your PIM information, but nothing else.  You can then reinstall all previous programs, except one that has caused the reboot cycle.

  WyreNut

  Message relates to: Centro (AT & T)

• VMWare 4.1 guard reboot and does not install

  I'm trying to install vmware 4.1 on a computer of IBM spare stand alone (HDD 40 GB, 2 GB RAM, Intel 3 GHz processor) that currently holds the Win Server 2003 on it. My intention is to boot from the cd vmware and wipe the hard drive and install ESXi server. I can boot VMware 4.1 CD, loaded records initial vmware of 4-5 and then it restarts, but instead of the installation (and see the bottom half yellow, half black) it goes back to the start menu (blue screen) again where he asks me if I want to install ESXi or booting from the Local hard disk, and same thing again and again. I played with the boot sequence, but didn't make any difference. I wonder if it's a matter of H/W or I do something wrong?

  Thanks for your response

  Welcome to communities

  Make sure that the server is on the compatibility list hardware http://vmware.com/go/hcl

  You must have a 64-BIT processor and preferably with hardware virtualization enabled. 2 GB of RAM would be sufficient to install ESXi but not to run virtual machines (perhaps a xp very small office).

• PC guard reboot after update to Toshiba Bluetooth

  After having been informed by Toshiba program for updating a Bluetooth application, I'm not able to enter for windows.
  After you install the update, I get a message that there is a problem in windows and need to restart.
  Unfortunately restart just gets me back to the same error message.

  Someone knows a solution?

  Please, let us know what model of laptop you have and what operating system you use.

  If you are using Win7 start your laptop and press F8. Choose the option "Repair my computer" to enter system recovery options - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  You can find option "system restore." Try to roll back OS a few days back so hopefully this will help you start Windows properly. You can try to do the same thing from OS in safe mode. Try the two options.

  If you use Win8 check please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  Start your laptop with F12 and select recovery options there.

  Check it out.

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer guard reboot to the windows xp logo screen.

  I find the xp disc.  I chose the option of repair of xp (F8).  When it restarts, I spent the XP logo screen, but then nothing.  The screen is blank.  I have an arrow cursor, but that's it... black screen only.

  Make sure that you have tried the steps in this thread:

  XP without boot troubleshooting

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer guard reboot after installing Vista updates.

  I downloaded and installed updates for Vista, and now I can not start Vista. The computer displays a message "Configuring updates: stage 3 of 3 0% complete." for several seconds, then restarts. Start in safe mode does not help and I can not boot Vista. How can I solve the problem?

  Hello!

  Thanks for your reply.
  Here are answers to your questions and suggestions.

  (1) remember you to make changes to the computer before the show?

  I did all the changes except the installation of the hotfix.

  (2) you get an error message?

  N °

  Unfortunately, none of the suggested methods did not work and I could not star Windows.

  So I had to call to our local Microsoft Support Center, and the problem is solved. Unfortunately, I don't remember all the steps. I myself remember I had to rename c:\windows\winsxs\pending.xml to pending.old, and then I couldn't windows starts. Then I had to make some modifications to save and delete files (I think it's the history of downloaded updates).

• OfficeJet pro 8500 wireless guard reboot

  Windows 7, a909g via a usb port. The printer is in a continuous boot loop.  Tried to diags don't find any problem.

  partial reset procedure I tried and everything he tells me when I turn it back on is there an abnormal termination, tells me to repalce all cartridges soon, turns off and then himself powers on in a continuous loop.  Ideas?

  There is a document with the steps to help solve a random question put. This document can be found here.

  I would advise also to try a different plug in order to ensure that the problem is not from the power outlet. However, I guess that the problem comes from the power supply to the printer.