Win 7 for access to shared photosmart 7350

Similar Questions

• Need drivers for printer HP Photosmart 7350 in Vista

  I deleted by mistake the driver for my printer HP Photosmart 7350 to my Vista operating system.  I tried the patch with the other pilot, and it does not work.  Any suggestions?

  * original title - deleted hp driver *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=72886&LC=en&cc=us&DLC=en&submit.y=5&submit.x=9&lang=en&cc=us

  Please select your operating system to link above HP > download the appropriate driver.

  See you soon.

  Mick Murphy - Microsoft partner

• WIN 98 driver for printer HP Photosmart 7350 necessary

  I have an old computer in the office that I want to connect my HP Photosmart 7350 printer.  The requirements of the system online here at HP said it supports WIN 98 system but I can't find an older pilot then WIN2000, is there a substitute driver I can use for this system 98?

  I included a link to the printer drivers.

  Click here for the drivers.

  Let me know how it goes.

• Photosmart 7350 and Win 7

  I have a photosmart 7350 and Win 7 ultimate, I installed the other driver Deskjet 5550 by HP support, but still no joy. (this driver does not work on Vista)

  You can try to add a device and select windows update to search for additional drivers. After that windows update is running, you should see a set of drivers under Hewlett-Packard. In this list is a photosmart 7150. I have not tested this driver but the products look like enough to make it work.

  I would like to know if it works.

• Voltage and amps for HP Photosmart 7350 printer.

  + Hey Folks, I learned to understand what a/c power supply I need for printer to my daughter. Moving, she has misplaced the power supply. I will call during the Thanksgiving holiday and will attempt to get his printer hooked up. Is anyone know requirements for this printer? (Printer HP Photosmart 7350)

  Hello

  Please try:

  http://www.Amazon.com/HQRP-replacement-adapter-Photosmart-DeskJet/DP/B001CASW6G

  I hope this helps.

  Kind regards.

• access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network

  access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network.  I enabled netbios over tcp/ip on computers

  Hello

  Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881

• Need help with the driver 64 bit, Win 7 for Photosmart C8180

  Hello. I downloaded the 64-bit driver for Windows 7, the Photosmart C8180 All-in-one. It shows the download link, the download for 64-bit file is the same file as the 32-bit file. However, I downloaded one that says that it is for the 64-bit Windows 7, in any case. http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3204...

  I uninstalled my printer. I clicked on my new .exe file, which was supposed to be for Windows 7, 64 bit. Installed just fine. However, when I go into Device Manager and my printer, it shows that the driver is a 32-bit. (which makes sense, since if you look at the 64-bit, or 32-bit download, both are the same file.)

  I have a program on my computer it is more precisely a 64-bit program, and it let me use the ability to scan, until my all-in-one printer has a 64-bit driver. I think HP has accidentally put even tranche under the 64-bit file as they have under the 32-bit download. Anyone come across this or know what I can do?

  Thank you!

  Honestly, I think that is what is happening, you should have the driver correct 64 bit for your printer.  Since you mentioned, that they just released the 64-bit program, it is also possible that it may be a relatively new problem which they are ignorant.

  I have two recommendations for you.

  One would be to get back in touch with them and let them know that you have installed 64-bit drivers and it may be a problem with the program.

  The only other option I can think would use the 32-bit software, although I know that you really want to use the 64-bit software.

  I'm not familiar with their program enough to know what could possibly be the cause of the Analyzer must be gray and not recognized, especially if it worked before when you use the 32-bit software.

• Win XP computer access internet life ethernet, but not recognized on LAN

  Desktop computer Win XP is connected to a local network (via ethernet) and recognized.  Shared files can be exchanged on the local network.  The Win XP computer was temporarily moved to a different location and an installed wireless adapter.  Two weeks later the Win XP computer was returned to the original location, removed wireless adapter and related to the uninstalled software.  Now the Win XP computer accesses the internet (via ethernet), but is not visible on the local network.  Win XP sees no other computers and other computers do not see the Win XP.  Trying to troubleshoot the network.  Troubleshooting the "1394 connection" gave a TCP/IP message has not been activated.  Check the 'properties' found that the 'Internet (TCP/IP) Protocol' is checked.  Is there another place where TCP/IP must be enabled?  Maybe a checkbox?

  Thanks for the help.  Unfortunately, I tried two suggestions, all of the above steps, and nothing has fixed my problem.  However, during the process of going through the steps in the "http://support.microsoft.com/kb/308007/en-us", I discovered "Microsoft Fix - it Solution Center".  Treatment of the symptoms of MS Fix - it network provided an instant repair the problem.  I still don't know what exactly was the problem, but now all computers can see each other on the LAN.

• How to access a shared file on my RN212 NAS remotely from another program?

  I've looked everywhere trying to find how to access a shared file on my RN212 NAS remotely from another program (kodi) on my iPhone 6 more remotely, away from home. I tried to FTP, UPnP, HTTP, etc. anything and it's driving me crazy! I run the program kodi from my phone for watching videos stored on my SIN, I have a router NightHawkR7000 and believe that I am fairly warned to get this figured out, but apparently not lol I have all the correct ports forwarded, but perhaps I'm missing a step somewhere. Any help on this would be much appreciated!

• Can access the shared folder by using the name of the server, but is unable to use the intellectual property

  

  Hi, I need help with a very strange problem.

  I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.

  So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.

  My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.

  I can using Ping IP or name of the computer for every user of AD.

  Please check the attached images.

  When I try to access it using IP, it gives me the following error:

  \\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.

  Currently, there are no available connection server to process the logon request.

  Hello

  You may need to ask the question on the TechNet Forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Photosmart 7350: Drivers Photosmart 7350

  I have a Windows Vista operating system. I lost my disc for my printer Photosmart 7350. When you used to "Add a printer" there were dozens of printers listed under HP. The only one I have showing is Photosmart A640 series. It does not work. The HP site only offers videos under the heading 'download the software and drivers '.  He also says that Windsows OS recognizes and uses the correct driver when a USB cable is connected to my computer and the printer above. This isn't.

  When HP stopped to have the software and drivers on their site? Please help to find the drivers for my Photosmart 7350.

  Thank you

  Hello

  Thank you for using the forum.

  Please find the link to download your drivers:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-7350-Printer-series/72885/model/72887#Z7_3054ICK0K8UDA0AQC11TA930O2

  There will be instructions to install a compatible driver.

  Hope that helps.

• I need to access a shared resource by a Linux via NFS server from a Windows XP client.

  original title: access an nfs share

  I need to access a shared resource by a Linux server via nfs from a Windows XP client.

  I suggested to install "Windows Services for UNIX Version 3.5" and I downloaded it, but:

  • I see only an English (or maybe Japaneese) version: can be used on my Windows XP withoyut Italian language conflicts?
  • I tried the ti montage, but I find a lot of features, I don't need
  • When installing asked me questions that I can't answer

  Is there a simpler way to let a windows XP client to connect to an nfs share?

  If "Windows Services for UNIX Version 3.5" are the right solution, where can I find the documentation to install it in the simplest?

  Concerning

  Marius
  Roma - Italy

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet Windows XP Service Pack 3 (SP3).

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• HP Photosmart 7350: Printer Orientation

  My printer randomly auto-réinitialise in landscape mode.

  Default mode (Printer preferences) is the portrait but sometimes print in the landscape.

  It is a random event.

  Has happened for a long time - the previous versions of Firefox and Windows XP.

  With the help of Yahoo mail, Firefox, Windows 7

  Hi @Gregg1,

  I can help you change the default printing for your Photosmart 7350.

  Being a random event, it can be difficult to pin-point where the problem may be.

  Have you checked the default print settings that perform all the print jobs?

  You can view the instructions of base here; Changing the settings to print in Windows 7 - but I want to add them here for you.

  Follow these steps to change the default for all print jobs print settings.

• Photosmart 7350 and Driver Windows 7

  Hey,.

  I have a big problem. Last week, I have a Windows 7 and my Photosmart 7350. My problem is that I don't have a car for my printer. I can't print and ich have no idea what to do. Maybe someone solvet this problem and can tell me how.

  Greetings

  Yves

  Try the following: go to the folder, devices and printers, add printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select HP Deskjet 5500 series.