Win 7 mouse and keyboard freeze

Similar Questions

• Mouse and keyboard freezes

  Original title: device

  my mouse and keyboard freezes and I have to restart, what can I do to solve this problem

  Hi Keith,

  Since its a laptop Dell Inspiron 620, I recommend you contact Dell technical support for assistance.

  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Good day!

• Mouse and keyboard suddenly crashes

  Start the computer and everything works normally (I have Win7 btw.). After some time, it can be for 20 minutes, or 3 hours, is not issue, the mouse and keyboard freeze, stop working. And there is a noise as if I disconnected something, I check the mouse and the hubs of keyboard and still nothing. I unplug them, but no sound, I have them and not of his new CAP.  I have PS/2 hubs, or something like that. What the more interesting, than other devices, like a controller or a video camera works normally. Please, help!

  Hello

  (1) when you are facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the brand and model of the mouse and keyboard?

  I suggest you, refer to the article below and follow the instructions provided, check if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  If you have additional questions, feel free to post. We will be happy to help you.

• Windows 7 screen freezes, freezes mouse cursor and keyboard freezes.

  Hi all

  About a month ago my internet kept cutting at about 02:00 in the afternoon - even if my BThub said it was a signal - and my internet access would not return until 05:00 sharp later that day here. This went on for about two weeks, it doesn't happen too much now, however, recently, something happens...

  I have a desktop HP Pavilion s5000 and all day - every day - not only freezes my screen, if I'm online or simply type in a Word doc, but my mouse cursor and keyboard freeze too, all at once. It's as if all of the computer crashes, and the only way I can "unfreeze" it is cutting off the entire batch to the switch. In this case nothing three times a day to ten times a day. Can someone tell me what could be the problem and how I can try to solve it? I did a system restore, to restore the PC to a date earlier, I did this about five times now, but the problem persists.

  Many thanks in advance,

  Danni.

  Hello Danni,

  Thank you for reaching out to us to the Microsoft Community Forum.

  When your computer hangs or freezes, it is disruptive and can slow you down. There are a few reasons your computer might hang, freeze, or crash. Try the following common methods provided for in article below as a first step to solve the problem.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also as you use HP computer, you can try the troubleshooting provided in the link below steps and check if that helps resolve the issue.

  Computer hangs or freezes (Windows 7)

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Important:

  In case you follow ' step 7 "in the above link from HP that speaks to recover the computer to factory settings then you will need to contact HP support and we also recommend that you back up all important data to an external drive before recovery of the computer to the factory settings.

  Hope that the information provided will help you. Do we know the State of the question, so that we can help you further.

• Install Win 7 OEM disconnects, mouse and keyboard

  Try to install Windows 7 Pro on NUC Intel core i5 system when Windows starts the installation and he asks for language... selections stop mouse and keyboard recognized so I can't complete installation

  Try to load the BIOS on the device and reset the default settings of the BIOS, and then try again.

  It is possible that the installation of the media can be corrupted. Download Windows 10 just to isolate the problem, then try to install to see if the problem persists:

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Mouse and keyboard on Sony Vaio laptop does not. It seems, tried everything. (win 7)

  A few days ago, my mouse integrated on my computer laptop everything just stopped working unexpectedly.  I restart my computer and on the login screen, I realized that my keyboard did not work also.  I got my hands on a keyboard and a usb mouse and managed to integrate windows where I tried a restore system since a few days earlier.  When I started my computer, I was greeted with a screen icon and mouse balc.  After having tried everything, I backed up my hard drive and did install a clean windows 7.  My mouse and keyboard still do not work.  The computer recognize my keyboard, but not my mouse, and I tried to uninstall and reinstall the drivers.  I have reset the BIOS, everything.  I should mention that the keyboard works fine in the configuration menu of f2 and f8 one too.  It seems just, nothing associated Windows.  In addition, the mouse and keyboard do not work in safe mode.  suggestions please!  My computer is a Sony Vaio laptop, around the age of 3 months.

  Given that the laptop has just 3 months, get in touch with Sony VAIO support:

  Support for Sony VAIO
  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Mouse and keyboard Center does not detect MS Trackball Optical

  When I plugged a Microsoft Trackball Optical on my laptop running Windows 7 Ultimate, it automatically downloaded and installed Microsoft Mouse and Keyboard Center - who said no. Device detected detected.

  Awesome! A Microsoft program that cannot detect automatically detected Microsoft device that is on the list of devices supported. So amazing that I could just cry, laugh or both.

  Strange thing however, on my desktop PC, also under Win 7 Ultimate, there nothing done except that work when I plugged an identical MS Trackball Optical.

  Hi GreggEshelman,

  I suggest to install the keyboard and mouse last Center from the following link and check if it helps.

  Mouse and keyboard Center 2.2 (formerly IntelliPoint IntelliType Pro)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=39098

  You can also refer to similar: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/microsoft-trackball-optical-not-recognized-by/e0a2d4d2-243f-4adb-8596-6f2318f7d09a

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

  Hi all
  Please can someone give me a good answer

  When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

  Hi Suresh,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

  I will certainly help you in this matter.

  1. What is the brand and model of your computer, the keyboard and the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Mouse and keyboard Microsoft Wireless Comfort 5050

  Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC

  With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel

  My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• 23-1000 all-in-one Pavilion: mouse and keyboard stop working

  I had my all-in-one since end of February 2016 - bought at Best Buy local - touch screen pc works still but don't do me any good because the mouse and keyboard do not work after 3 months of excellent performance.  Both have new batteries.  Can be signal problem because I've set up wireless.

  Help - frustrated and have no idea what to do.

  Thank you

  Terry Anderson

  Hello @MaggiesMimi,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the keyboard and the mouse.  I understand that they both stop working recently, and you have already replaced the batteries.  I can certainly help you with this!

  First of all, try to review the following document and let me know how it goes:

  HP PC - keyboard and wireless mouse troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Ergonomic mouse and keyboard L5V 00001

  Hello everyone.

  I bought ergonomic mouse and keyboard a few weeks back.

  Somehow my usb transceiver was damaged, and the keyboard and mouse don't work anymore.

  Can someone help me out is there a way to get the new transmitter/receiver that can be synchronized to the mouse and keyboard?

  Thank you

  Hello

  Unfortunately for additional assistance, you will need to contact the support Microsoft Hardware here:

  https://www.Microsoft.com/hardware/en-us/support

  Kind regards