Tecra A7 PTA71E - Win XP BSOD

Similar Questions

• Re: Tecra A7 PTA71E - unknown device TOS1901

  Hello

  I have a Toshiba Tecra A7 PTA71E-07500VPT with Windows 7 Prof
  I did a BIOS upgrade to A6, then I installed the Windows / Prof. SP1 PT.

  Problem: When I open the Managment devices, I see one '? "other devices"and"!" hardware ID "unknown device".
  ACPI\TOS1901
  * TOS1901

  Where can I find a solution?

  Thanks in advance.

  JLapis

  Hello

  Check out this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/TSB7501W20006R01.htm

  Please download and install the "password utility" or the "Utility supervisor password" to get this resolved.

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.

• Tecra A7 PTA71E: Bus of serial controller resource conflict PCI on motherboard

  Hello

  Sorry for my English.

  I have a problem with this laptop Tecra A7 PTA71E 00D00DSP. One of my clients transported this laptop with the next serial number.
  When you turn on the laptop, before windows login, seems that three consecutive messages:

  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:01
  Resource conflict - PCI on the motherboard mass storage controller.
  BUS ERROR: 07 device: function: 06, 02
  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:03

  I changed the RAM, hd, eating, with the same result.
  If you come in the bios and save the changes with the best configuration or default installation, the result is the same. I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard. I hope it 'sn' t true and you, the experts of the toshiba, might help me find or tell an alternative, because I think my client won't like the motherboard, because it is usually too expensive.

  Who is King
  Mikel Pastor

  Hello

  > I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard.
  I doubt s typical error for Toshiba laptop.
  According to this error message, there is something wrong with PCI devices on the motherboard, and this error may happen to any laptops from different manufacturers it typical error of s which is related to the question of the motherboard.

  According to me, there is no much to do you'll need a new motherboard.

• Tecra Z40 - A - win 7 blue screen of death (BSoD)

  I have 3 times the BSoD on TECRA Z40 - A experience running windows 7 64-bit English last month!

  No new hardware has been installed, only the Toshiba and Windows updates carried out official.

  I have attached two screenshots from the dump files, files that have probably caused the crash...

  BSOD appears due to serious system problems or malfunction of the equipment.

  I think first of all you should get the phone to the factory settings.
  If this does not help, the parties must be checked.

  I think RAM memory modules.
  It is very important and must be checked in the first place.

• Tecra R840-16J - Win 7 installation - how?

  Hello

  I want to make a new one. Clean instal win7 Pro in my Tecra R840-16J (a BSOD appeared only 6 months after I bought it!). I'll install an SSD too!

  Could someone tell me how to do? (I mean, which drives should I have to install hel?) I downloaded al 48 discs and Aps for my model when using win7 64 bit.

  Kind regards
  Paulo

  Hello

  Install the drivers in the following order:

  Windows 7 64 bit

  Driver USB-Serial V1.3.0
  PlayReady PC Runtime 1.3
  Infineon TPM professional package 3.60.2071.00
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface 7.00.02.1164
  Intel AMT 7.00.02.1164 software
  8.801.2.1 - 101225 a-111146C-Toshiba AMD display driver
  Intelligent management of the TOSHIBA v1.0.2.0M screen
  Driver Intel Rapid Storage Technology 10.1.0.1008
  Realtek Audio Driver 6.0.1.6271
  Intel LAN driver 15,7
  USB3.0 Driver 2.0.32.0rior
  ALPS Pointing Device Driver v7.x6.303.106_A
  Synaptics Touch Pad Driver 15.2.4.4
  Driver O2Micro 1.1.4.207G smart card reader
  TOSHIBA value added package 1.4.1
  Ricoh 2.11.17.02 card reader
  Intel Wireless LAN Driver 14.0.0.113.0.s64
  Intel Proset 14.0.1.0.0.s64 & 13. 3.0.0.1.s64
  ConfigFree 8.0.35
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 13
  TOSHIBA Fingerprint Utility V1.0.2.36
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Utility of rotating 180 degrees TOSHIBA v1.4.0.0
  TOSHIBA eco Utility 1.2.21.64
  TOSHIBA HDD/SSD Alert 3.1.64.6
  TOSHIBA HDD Protection 2.2.0.12
  TOSHIBA Service Station 2.1.45
  TOSHIBA PC Health Monitor 1.7.3.64
  TOSHIBA Sleep utility 1.4.1.7F
  TOSHIBA V4.00.4.12 VCR - HAS
  Intel Wireless Display 2.0.27
  TOSHIBA v2.0.4 synchronization utility
  TOSHIBA Media Controller 1.0.85.4
  TOSHIBA Media Controller plugin 1.0.5.13
  PatchFiles

• Blue screen of death, the Tecra M10 runing Win XP

  My Toshiba Tecra M10 works like a dream for three years without ever gasp

  Until the other day.

  My Toshiba laptop is constantly cycling with a BSoD - then I will start windows - it looks like it'll work - it gets in the paper password on screen - then a few blank screens - BSoD then again repeatedly

  I am running XP Pro SP 3

  I couldn't get my laptop to stop doing this, so I removed the battery and then the power cable and it started again and then when he went to BSoD I took a picture of the screen with my digicam fortunately I have one that focuses immediately and take the picture instantly too

  the ERROR is

  BAD_POOL_CALLER

  Tech Info

  STOP 0X000000C2 (0 X 00000043, 0XC38C0000, 0 X 00000000 0 00000000)

  I haven't changed anything on my PC recently and I have tried all the beginning of the top safe mode and last known good configuration but it still cycles round and round and round

  This laptop is not connected to anything and comes standard with a module of memory 2 MB in it to bog

  the last known good configuration does not either, nor did one of the other options in the "safe".

  So I slipped on the HARD drive and tried to boot from my XP CD - not the recovery of Toshiba, one that I have not tried this one in the laptop again.

  Rather unsurprisingly with no HARD drive in the laptop, I got a different error

  STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  which is I believe the inaccessible boot device - I know, it cannot see the HARD drive because it is sitting on my desk but would wait to boot from the XP CD... ISN'T IT?

  I tried to set all the parameters by default both boot - no difference

  With the HARD drive in - the laptop boots as windows user enter screen with no problems but doesn't stop on this screen - after a few screens blank the BSoD comes up and off it goes again.

  In the advanced startup options, I changed auto-start on setting error so it does not loop forever. and this prevents loop to the start cycle... seems to be changing this setting is not a permanent change

  Then I went into the BIOS and under the mode of the SATA AHCI to IDE controller and the STOP error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) is gone now and the pc will try to install Windows until I need to see the HARD drive and then gives up trying to install XP with a no. HHD error (the HHD is based of course on my desk) so it was a valid error expected...
  put the HARD return drive without changing the BIOS back makes it appear the STOP 0x000000C2 (0 x 00000043, 0xC38C0000, 0 x 00000000 0x00000000) error

  HELLLLLLLLLLLLLLLLLLLP please

  Hello

  I think you should test the HARD drive don't you agree?
  In my opinion, this should be the first part that should be checked since the new operating system installation was not possible

  I recommend the use of the tool called: HDD Drive Fitness Test. This software creates a bootable floppy to test. You can use this disk to run a test HARD drive without installation of any system.

  If the error would be detected: replace the HARD drive.
  If no error would be: use the Toshiba Recovery disk in order to install the system. (don t forget to put back the BIOS to default)

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• Tecra R850 - display driver problem - BSOD

  Hello

  I have a Tecra R850 with the ATI HD 6450 M and every now and again it crashes and BSOD appears.
  I have observed that mainly happens when playing flash videos.
  After reviewing the events system, I discovered that there is a problem with the display adapter driver.

  The said event system is perhaps a solution [here: http://wer.microsoft.com/Responses/Response.aspx/21682/en/5.1.2600.0.00000000.9.9?SGD=13feb1cd-4c8b-4c3a-aeee-ca4ca2c99729]

  This Web page indicates that it is a bug in the driver and I need to upgrade to the latest driver to solve problem, and it provides a link to the ATI Web page.

  I downloaded the drivers from ATI Web page and the installation program indicates that it is not compatible with Toshiba laptops.
  I checked the Web from Toshiba site and I already have the last (and only) driver for my graphics card.

  As it appears on the Web page, there is a bug in the driver, but Toshiba seems not having published an update of the pilot despite Ati...

  Can anyone help?

  Thank you
  Jose.

  Hi Jose

  Are you using the original Toshiba pre-installed Windows or your own version?
  Display driver original included in the original recovery image is tested, so you shouldn't have trouble with basic stuff like flash video playback.

  Since when did you notice this problem? Can you give us an example when this happens?
  You have installed updates?
  To be honest, I can't imagine that this issue is on the first day of use.

• Satellite C660-24F: win 10 BSOD - system thread exception unhandled

  I upgraded my Toshiba Satellite C660-24F to windows 10 pro. After the upgrade it restarts again and again showing the dead blue screen with the message
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. (athwbx.sys). How can I get rid of this error?

  athwbx.sys which is mentioned in your message, belongs to the Atheros WLan driver...

  So, I think that the BSOD appeared because of compatibility problems between the Win 10 and driver Atheros...

  Possible solution:

  I think that deletion of the Atheros driver in Device Manager should help you to solve this...

  Please keep the device connected to the internet using LAN.

  So after uninstalling the Atheros WLan driver and you restarted the laptop, Win 10 should automatically find a driver compatible WLan to internet automatically...

• Satellite A300 - 1EC Win XP: BSOD during the passage of external display

  Toshiba Satellite A300-1ec almost new, with Win XP sp3, all updates, drivers of toshiba Web page

  When I use the extended via tv (s-video) output option, everything is ok.
  But when I try to change the display, extended (or any display mode double) to a single screen (laptop)... I get a blue screen

  He said something nvidia... but it's not very useful

  someone knows more?

  Hello!

  The Microsoft Knowledge Base, I found an article about this BSOD:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;827663

  In addition, I think it might be the hardware problem, in my opinion the RAM.
  Test the RAM with Memtest86: [www.memtest86.com]

  Maybe reinstall Windows to solve the problem.

  Good bye

• Need help to understand the last string on my Win 7 BSOD. The Minidump files are attached.

  Hello

  Since last week, I've known several BSOD. Some have referred to a memory problem, but after you run a memory diagnostic seveal times, I still have to find the problem.

  Since last week, here is the link to the minidump files.

  https://onedrive.live.com/redir?RESID=2FA3EA1D7C87B0CD! 471 & authkey =! AA05X_X_DXaEOgc & ithint = % 2cdmp

  Thanks in advance for any help you can give.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\080714-32011 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0xfffff800'03660000 PsLoadedModuleList = 0xfffff800'038 has 3890
  The debugging session: Thu Aug 7 14:15:03.891 2014 (UTC - 04:00)
  System Uptime: 0 days 4:02:55.202
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff6e400084040, 0, fffff800036e7f42, 5}

  Could not read the name of the problem driver
  Probably caused by: memory_corruption (nt! MiUpdateWsle + 122)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff6e400084040, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff800036e7f42, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000005, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390d100
  GetUlongFromAddress: cannot read fffff8000390d1c0
  fffff6e400084040 non paged pool

  FAULTING_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  MM_INTERNAL_CODE: 5

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: vsserv.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff8800970b550-(.trap 0xfffff8800970b550)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000098000000000 rbx = 0000000000000000 rcx = 0000000000000a0f
  RDX = 0000c 80010808009 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff800036e7f42 rsp = fffff8800970b6e0 rbp = 0000000000000c 70
  R8 = fffff6e400084040 r9 = 0000000fffffffff r10 = fffff70001080488
  R11 = 000000000000116e r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  NT! MiUpdateWsle + 0 x 122:
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8] ds:fffff6e4'00084040 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff800037525b3 to fffff800036d5bc0

  STACK_TEXT:
  "fffff880 '0970b3e8 fffff800' 037525b 3: 00000000'00000050 fffff6e4 ' 00084040 00000000 00000000' fffff880 ' 0970b 550: nt! KeBugCheckEx
  fffff880 '0970b3f0 fffff800' 036d3cee: 00000000 00000000' fffff6e4 ' 00084040 fffffa80' 04122600 fffffa80'00000028: nt! : FNODOBFM: 'chain' + 0 x 43801
  fffff880 '0970b 550 fffff800' 036e7f42: fffffa80'00000028 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  fffff880 '0970b6e0 fffff800' 036f41bd: 00000000' 00000a0f 00000000' 23ba4548 fffff700 ' 01080000 fffff700' 01080000: nt! MiUpdateWsle + 0 x 122
  fffff880 '0970b 750 fffff800' 036f39df: 20f00001 '63eb7025 00000001' 63eb7121 fffffa80' 04e10200 00000000' 00000000: nt! MiCompleteProtoPteFault + 0x2cd
  fffff880 '0970b7e0 fffff800' 036f24f3: 00000000' 0016bd60 000007fe'fbef34ac fffff683 'ff7df798 fffffa80' 07f6cd08: nt! MiResolveProtoPteFault + 0x1cf
  fffff880 '0970b 870 fffff800' 036e2179: 00000001 00000000' 000007fe 'fbef34ac fffffa80' 09a44af0 00000000' 00000000: nt! MiDispatchFault + 0x1c3
  "fffff880 '0970b 980 fffff800' 036d3cee: 00000000 ' 00000008 000007fe ' fbef34ac fffff880'00000001 00000000' 0863fe50: nt! MmAccessFault + 0 x 359
  fffff880 '0970bae0 000007fe' fbef34ac: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  00000000' 0863fb68 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fe'fbef34ac

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! MiUpdateWsle + 122

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb

  IMAGE_VERSION: 6.1.7601.18409

  Nom_image: memory_corruption

  FAILURE_BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:x64_0x50_nt! miupdatewsle + 122

  FAILURE_ID_HASH: {adc90a39-f60f-e57a-aeeb-d2a428d2eb03}

  Follow-up: MachineOwner
  ---------

• Error Win 7 BSOD on my Dell Inspiron laptop.

  My laptop Dell Inspiron running Win 7 Home Premium 64 bit often gives me error BSOD especially if I use Internet Explorer (version 9).

  The error indicates something error page_file and igdmpd64.sys at the beginning.
  The error dump file created is linked here: https://dl.dropbox.com/u/76864031/030713-24242-01.dmp
  If anyone can help?

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (don't forget to update the BIOS and)
  Dell chipset drivers)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even
  for clubs that appear to be identical) and when the faster memory is placed in the system
  behind the slower memory. It is therefore preferable Exchange also sticks in and out to check
  These tests of memory even if all are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 007 b under Win XP BSOD

  I tried to convert a virtual machine for the server 2.0 Win XP a Lenovo Thinkpad R60e. After a few failed attempts with 3.0, I used the beta version which seems to offer more flexibility.

  3.0 has always reported to 97% (impossible to determine the operating system). With the beta version, I had (I guess that the same error) to 94% in the phase of reconfigure. Disable the option to reconfigure, conversion for the first time has completed successfully, however, the clone is always starts plu.

  Get bsod 0x0000007b (0xf7941524, 0xc0000034, 0, 00 0 x 00... 0)

  Tried several options for the disk ("even" and buslogic) adapter.

  The error messages from the converter:

  An exception in the meantime on the agent task ends. Collecting newspapers to the officer before reproducing the exception more. Exception message: converter.agent.internal.fault.ReconfigFault

  Since the position of the user, if I understand well he ain't going to ESX and FDI should not be a problem. Also the user mentioned that he chose "buslogic" destination controller, so my guess is that it could not be associated with free.

  Could you please use converter to get the logs and attach them here. Better yet, please post on the forums of 4.0 beta converter because you use version 4.0. In 4.0 you can right click on the task that failed and click on "export logs.

• Portege 3440 CT - cannot install the Win XP - BSOD 0X0000007b

  Hello

  I HAVE A TOSHIBA * PORTEGE 3440 CT *.

  I WANT TO INSTALL WINDOWS XP.
  THIS LAPTOP DO NOT HAVE A CD-ROM DRIVE AND I USE A LIGHT OF 24 PCMCIA FREECOM TRAVELLER CD.
  I DOWNLOADED THE FREECOMBOOTDISKCREATOR. EXE TO MAKE MY USB FLOPPY BOOT DRIVE AND STABLE THE XP.
  PERHAPS THE PROBLEM IS THAT MY COMPUTER DOES NOT RECOGNIZE THE USB FLOPPY OF FFD TO RUN AND INSTALL WITH A BLUE SCREEN OF DEATH (ERROR 0X0000007B) ABORDED.

  I HAVE THE WINSOWS XP SP2 OEM.

  THANKS FOR THE HELP
  NIK

  First of all thank you for sharing this with us and great info you could install Win XP using the external CD/DVD drive.

  > but if you can help me with a solution without additional CD-ROM usb drive I would be gratefull!
  Hey mate. It is important that you could install Win XP ;)

  PS: as far as I know you don t need any driver to start from the CD/DVD of PCMCIA drive. It s controlled by the BIOS.
  Therefore, it should be possible for a start of the PCMCIA CD/DVD drive and reinstall Win XP