Win 8 does not detect graphics "AMD RADEON HD M 8750" correctly in Device Manager

Similar Questions

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.

  Windows 7 can not find the graphics card for the amd radeon 8650g.  I tried to install the drivers from AMD and they never appear in the Device Manager.  It only gives me "Standard VGA Graphics Adapter."  Windows Update will not update.  They say that it is current because it cannot find the radeon 8650g.  AMD Setup never shows the driver file during installation.  It installs all sorts of other things, but never the driver.  As if it does not find material.

  What is going on.

  Hello:

  Your laptop is not supported by HP for Windows 7.  There is no graphic drivers for W7 for it to HP.

  My only suggestion is to try the graphics drivers from the Lenovo G505s

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764

• WIN 7 does not detect my HARD internal Western Digital drive WD10EARS

  Hello

  WIN 7 can not detect my Western Digital internal HDD WD10EARS (installed in housing Chieftec CEB - 35s - U3) via the USB 3.0 interface.
  I see the HARD drive in the control panel > all devices in Control Panel > devices and printers > devices, but I can not see HDD when I open my computer.
  Probably the problem with the driver...
  Thanks for help.

  Hi Mojster,

  Try the following.

  Step 1: Check if the drive is detected in the disk management utility.

  a. click Start, type diskmgmt.msc in the search box and press enter.

  b. check if the drive is detected and it has a drive letter.

  Step 2: If the Player do not have a drive letter assigned, then do it manually. You can follow this article.

  Change, add, or remove a drive letter

• My all new laptop does not work on AMD Radeon HD M 8670

  Dear Sir

  I have a problem with my laptop brand new. It of a HP Pavilion 15-e011ed and has an i7. (with 2 graphicscards inside)

  The problem is I want to play a game, it is named as League Of Legends, but it does that on my Intel graphics card, it's not going on my AMD Radeon HD M 8670 probably because my fps on the game is as 02 on low graphics. I already tried to open the CCC and turn the game performance, but it won't work. Can someone help me to select only the AMD graphics card, so I only have little fps.

  Kind regards

  Jeroen

  PS Sorry for the bad English im from the Netherlands.

  Hi Jeroen,

  Welcome to the HP forum!

  Thank you for your request, I will do my utmost to help.

  I understand that you have a problem with the graphics on your new computer.  Here is a link to a post on the switchable graphics by @TwoPointOh Switchable Graphics. Please note the switchable graphics on laptops configured with Intel and ATI GPU.  Feel free to re-post if you have any concerns or questions.

• After that the effect does not recognize my AMD Radeon r9 M370X (macbook pro 15), what can I do?

  I just bought my macbook pro 15 inches with the graphics card (AMD Radeon r9 M370X with 2 GB of VRAM) and Adobe CC is not recognizing, WHAT can I DO? Help, please!

  Your screenshot shows that After Effects is thankful your GPU very well. The OpenGL section shows that OpenGL works normally. AMD cards like yours have CUDA, so the CUDA section is empty and the ray-tracing section (which depends on CUDA) shows the same.

  Don't worry CUDA; It is used only for an obsolete feature, the 3D rendering engine traced to the RADIUS. The page that I asked you to read above explains everything in detail.

• CD/DVD on my D610 running Win 7 does not detect a blank DVD

  I just bought a Dell D610 with Win 7 and my optical drive doesn't detect any blank DVD in the drive.  CD is fine and I am able to burn a CD, but do not detect any DVD, be they + R or - R.

  The player is able to detect and play the burnt meadow or store bought DVDs very well.

  I've been to the Section of the driver of dell and get the message that the OS is not supported.  I tried to load the driver for my drive but no luck.

  I have two D610s, one running XP and the reader detects and burns DVD fine.  I swapped the drive of the laptop with Win 7 and used on one with XP and it works very well.

  Tried both discs on one running Win 10 and again, they fail to detect any blank DVDs, I tried, including Memorex and Maxwell discs with no luck.

  Both drives are HL-DT-ST CDRW/DVD GCC4244 ATA

  Current driver version: 6.1.7601.17514 Date: 2006-06-21

  I also tried the Driver on the Dell download site, but that doesn't work anymore.

  I have read suggestions to remove upper and/or lower limits, but this info is not listed in the section of the registry.  Could this be the issue perhaps?

  Any help would be greatly appreciated.

  Hi acamara,

  This disc is a CD-RW/DVD-ROM. It can read and burn CDs, but it can only read DVD, not burn DVDs.

• MOBILE PHONES WHEN CONNECTED TO MY LAPTOP DOES NOT DETECT NOT

  When I had connected my phone via a data cable. It does not detect my phone.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Need help with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics

  I recently bought the 15z-j000 ENVY and updated with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics. I wanted the dedicated HD 8750 M for games and whatnot. When I opened first to the top of my new laptop, I did a clean install of Windows 8 from a USB key. This completely erased all of the HP preinstalld drivers, software, etc.

  I installed the beta drivers for my laptop from the site Web of AMD.  Here's my problem. How will I know that my dedicated video card working properly? I ran a few games and they seemed to do as well. But when I checked my system with CPUz and dxdialog it says that I was running the graphics card integrated. How does the dual graphics and how can I make sure I take advantage of my dedicated card. An explanation of the depth and how for the use of the AMD solution dual graphics card would be apprechiated.

  I'm no expert on the switchable graphics, but you find the answers to your questions in the Overview of the switchable graphics or Dual GPU or switchable on portable graphics equipped with double GPUS and AMD.  Be forewarned however, documents were written for the HP PC using the appropriate HP, drivers if you use the Beta from AMD drivers, then documents may not match what you see on your system.

  R

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• Does not detect my HARD drive in the BIOS

  Yesterday, I bought DT01ACA300 of HARD drive and it does not detect.
  I've tried it on two motherboards (different ports and different controllers: AMD, Intel chipset JMicron chipset) with different powers and signal cables (which do not work with my player Samsung HDD and DVD SATA Lite-on), but it won't do no good...

  It seems that the only thing that might have caused it may be the power supply, but I can't check it out because I don't have a spare. I tried to disable most of the unnecessary controllers on MB to lower energy consumption, but it did not help.

  From what I've read on the Internet, it seems that it is not I can do by myself and it is very likely defective drive, but I still have some hope that I can make it work...

  It would be a big problem to return to calm: I'll have to send in another city in the authorized service center so that they would check it, and then only, I can get a replacement (if noone will fly it by then, which can happen...).

  Which machine do you have?

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!