After that the effect does not recognize my AMD Radeon r9 M370X (macbook pro 15), what can I do?

Similar Questions

• After that the effect does not work after the upgrade to Yosemite

  Hello

  My After Effects CS6 ill not start in my other user accounts since I updated to Yosemite. I installed the plugin/update which was released and it works in the administrator account, however, not on others. Even when I go in the accounts themselves and install and reboot, I have the same problem. It is a laboratory for students, so I can't delete accounts and start over as they all work on these accounts. How can I solve this problem?

  It may be a permissions problem. This is usually the case with an upgrade with Mac OSX (especially since the work of administrator account). fix the permissions problem that prevents to start Adobe applications:

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello, when I turn on my imac it says that the keyboard is not connected. It is however a wireless keyboard. What can I do?

  Hello, when I turn on my iMac it says that the keyboard is not connected. It is however a wireless keyboard. What can I do?

  Hey scjane, take a look at this topic Support of Apple. It's been archived, but I think it's just for OS X 10.7...

  Apple wireless keyboard: difficulties in matching the process - Apple Support

• Allowing the AMD Radeon R9 M370X (MacBook Pro mid-2015) for accelerating GPU on Adobe Premiere Pro and other

  Hi all

  I just "upgraded" my MacBook Pro to a model of end of 2013 with a NVIDIA GeForce GT 750 M to a whole new model mid-2015 with an AMD Radeon R9 M370X.

  To compare performance, configure queues of same rendering with Premiere Pro Media Encoder in four sequences. These sequences contained native 4 K XAVC I, but four sequences have been "cropped" on a chronology of 25 1080 p, which means that I actually not export 4 K images. All four were slightly different, but while a 50 minutes.

  As I wanted to get an example of 'real world', I left on the old machine as CUDA rendering engine, as it's the best performance I can get the machine and the rendering engine on the new machine that OpenCL.

  I have to fill out a similar task at least once a week, so I know by experience, a queue of rendering as it takes about 2 hours by sequence to return.

  The results were very interesting and a little tell-satisfactory. Essentially, render on the CUDA compatible machine times were about 30% faster through all sequences of four compared to the AMD powered machine.

  Perhaps, somewhat lengthy explanation, but basically, I would like to know how to activate the acceleration in Adobe CC GPU - but especially with Premiere Pro, After Effects and Media Encoder.

  Apple seem to think that they support OpenCL (https://support.apple.com/en-us/HT202823), AMD announce their compatibility with Adobe CC (http://www.amd.com/en-us/solutions/software-partners/adobe) - then why my GPU does not appear as a recommended here model? - https://helpx.adobe.com/premiere-pro/system-requirements.html

  Any advice or suggestions are appreciated.

  Hey Connor,

  This R9 card comes out MAY 2015 and 2015 CC was released on June. So, any card (s) that is listed in Premiere Pro specifications list must pass appropriate tests. In addition, credit cards that has a 1 GB of VRAM is likely to allow "mercury Playback Engine" for use CUDA or open CL features.

  According to the rendering time is considered as MVidia GT 750 M has a priority on AMD R9 M370X. You can check and compare the two cards, and also check the link below.

  Radeon R7 M370 vs GeForce GT 750 M Mac

  Vinay

• After that the effects did not

  Hey,.

  I bought the creative cloud of all the package and I didn't have the after effects on it and when I want to download the after effects on the web, it is said:that we are currently experiencing some issues, please try again later. If the problem persists, contact the customer support.

  Help me please

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• After that the effects will not load

  I get the error

  You cannot use this version of the "Adobe After Effects CS6" application with this version of Mac OS x.

  You have "Adobe After Effects CS6" 11.0.

  Can anyone shed some light on this? Thanks in advance.

  Install the updates:

  http://Adobe.LY/AE_CC_1201_Mavericks

• The computer does not recognize my skycaddie is hung

  Synchronization of caddie program is installed, but it seems that the computer does not recognize my skycaddie is hung

  Original title: I can't get the computer to recognize my sky caddie - when I go to install a new device is not able to find it

  Hello

   
   
  1. the device is recognized in Device Manager? Is there a yellow exclamation point or question mark next to the device?
   
  2. don't SkyCaddie connects to the computer via USB? If so, is he recognized initially until the software is installed?
  3. do you receive any error messages?
  4. What is the antivirus installed on the computer program?
   
  If you connect the device via USB, I suggest you to change the USB port and check with the question.
   
   
   
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
  I also suggest you to see the link below for more option support about the issue.
   
  http://clubsg.SkyGolf.com/content/FAQ/SkyCaddie+technical+support+questions
   
   
   
  I hope this helps.

• the Bank does not recognize your computer

  Approximately a week before, when I log into my bank account, the background would be dim and a window shows indicating that (the Bank) does not recognize my computer and to please fill in the following information such as card number, ATM number, etc..  Of course, I didn't fall for it, but the same problem exists for other accounts such as Amazon, my gas utility account, my credit card accounts, etc...  What kind of virus is it called? And how to remove it, isolate it or quarantine it?

  Thank you

  I95Jim

  PML... It's a tactic that I didn't think to try... again.  Just before, I had a discussion with an expert/technician(at www.supportservices.microsoft.com/support/expert/Waldo).. .He took a while, but he eventually removed the spyware that was causing me grief (TDSSKiller, Norton I think) and he did a few other things... then I tested a variety of accounts several times successfully, the virus disappeared.  But, thank you for your suggestion and keep that account as a possible solution for similar incidents in the future.  Yes, there is a FUTURE...!

  Thank you

  I95Jim

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Cannot install the drivers for the Dell 725 of CD printer as the computer tells me that Windows 7 does not recognize

  I have a Dell InspironM5010 with Windows 7 installed and you want to use a Dell 725 printer with it. I have the CD with the drivers of the printer, but can not load as the computer tells me that Windows 7 does not recognize

  Original title: ask the community

  Your CD is too old, but you can be lucky...

  Is there a downloadable file here for your printer...

  http://www.Dell.com/support/troubleshooting/ca/en/cadhs1/product/Dell-725

  .. but this is for Windows 7 32-bit ONLY, and I have the feeling that your OS is 64-bit.

  Windows may have a driver somewhere see here for how to find...

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• The Explorer does not recognize my DVD drive

  My system suddenly stopped recognizing my DVD drive. Windows Explorer does not recognize. Device Manager says there are and that the driver is up-to-date. I tried to uninstall and reboot, but that did not help. I use Win 7 Home premium, 64-bit with a terabyte HD and 6 GB of RAM. I also tried to go to a previous restoration and cured the problem for a short time. Any ideas?

  Hello

  Since the system restore worked, for a while, it seems that you have a program that can
  is causing the problem. Having too many programs of CDs and DVDs, in particular those who are responsible
  pieces themselves at startup, can cause this problem, that compete for resources. If you
  can use the system to restore the drive working again, or if using other methods
  below, then EXPORT the registry keys, so you can compare and merge those back
  If necessary.

  -------------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Re: DVD recorder has changed and the laptop does not recognize

  I had to change my Toshiba Qosmio F20 portable recorder.
  Now, the computer does not recognize.

  I installed a DVD burner Sony Optiarc AD - 7590 IDE.
  I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.

  I currently use Windows 7 on this computer.
  Is it only possible for the computer recognizes it, "any driver or driver I install?

  Hello

  Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?