WIN 7 does not detect my HARD internal Western Digital drive WD10EARS

Similar Questions

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• the Windows xp Setup program does not detect my hard drive

  When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

  SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  Several means have been formulated to work around needing a floppy disk.  You can view the following items:

  'Install Windovs XP on SATA without floppy (F6)'
    <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

  "Install Windows XP on a SATA hard drive"
    <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

  HTH,
  JW

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Does not detect my HARD drive in the BIOS

  Yesterday, I bought DT01ACA300 of HARD drive and it does not detect.
  I've tried it on two motherboards (different ports and different controllers: AMD, Intel chipset JMicron chipset) with different powers and signal cables (which do not work with my player Samsung HDD and DVD SATA Lite-on), but it won't do no good...

  It seems that the only thing that might have caused it may be the power supply, but I can't check it out because I don't have a spare. I tried to disable most of the unnecessary controllers on MB to lower energy consumption, but it did not help.

  From what I've read on the Internet, it seems that it is not I can do by myself and it is very likely defective drive, but I still have some hope that I can make it work...

  It would be a big problem to return to calm: I'll have to send in another city in the authorized service center so that they would check it, and then only, I can get a replacement (if noone will fly it by then, which can happen...).

  Which machine do you have?

• Help me. H700 RAID does not detect the HARD drive.

  Hello everyone!

  My Dell C2100 used CPU X 5650 and 700 Raid Perc.

  After connection, system says:

  "Enclosed envelope does not support in the direct mapping of the controller mode.

  Please contact your system.

  System was interrupted because of the supported configuration. »

  I replaced the H700 raid, then wire and FW update. System not notification but after press Ctrl + R, perc raid h700 not detect any hard disk.

  Please help me!

  TKS!

  TrungDV

  The issue is due to backplane having a bad rider on the expansion of the plant.  To correct this remove J15 the C2100 3.5 "bottom of basket, or backplane C2100 2.5 J7".  Refer to the below pictures to help locate the jumpers.

  3.5 "

  

  2.5 "

  

  Let me know if this helps solve the problem.

• CD/DVD on my D610 running Win 7 does not detect a blank DVD

  I just bought a Dell D610 with Win 7 and my optical drive doesn't detect any blank DVD in the drive.  CD is fine and I am able to burn a CD, but do not detect any DVD, be they + R or - R.

  The player is able to detect and play the burnt meadow or store bought DVDs very well.

  I've been to the Section of the driver of dell and get the message that the OS is not supported.  I tried to load the driver for my drive but no luck.

  I have two D610s, one running XP and the reader detects and burns DVD fine.  I swapped the drive of the laptop with Win 7 and used on one with XP and it works very well.

  Tried both discs on one running Win 10 and again, they fail to detect any blank DVDs, I tried, including Memorex and Maxwell discs with no luck.

  Both drives are HL-DT-ST CDRW/DVD GCC4244 ATA

  Current driver version: 6.1.7601.17514 Date: 2006-06-21

  I also tried the Driver on the Dell download site, but that doesn't work anymore.

  I have read suggestions to remove upper and/or lower limits, but this info is not listed in the section of the registry.  Could this be the issue perhaps?

  Any help would be greatly appreciated.

  Hi acamara,

  This disc is a CD-RW/DVD-ROM. It can read and burn CDs, but it can only read DVD, not burn DVDs.

• SeaTools-BACK does not detect my hard drive, how I should zero my HDD now?

  Hi all!
  I use SeaTools for DOS for many years to fill the hard drive of my old ancient PC from scratch and never has a problem. However, today when I had zero fill the Momentus ST9500325AS 500 GB SATA laptop 1 year, I got to know that the last SeaTools for DOS can not find a controller to read my hard drive. My laptop has Intel HM67 chipset. As the 'last' SeaTools BACK has been updated in 2011, I understand very well that Seagate does not update the tool to add the controller of my chipset. So all I want to ask is, how do I zero fill my drive now? Should I go for some other tools? Are they reliable? Please suggest some good I knew that nothing else than seatools for zero fill.
  Thank you for your help

  Hi Satyam,

  Formatting zeros is a comprehensive method of wiping a disk storage. When formatting a storage drive deletes data on the surface, the data can still be recovered until it is replaced. Formatting the storage disk wipes zeros, replaces the data deleted by a series of zeros and then wipe the drive again to make recovery of data beyond the civil means. Zeros of formatting is usually done to hard disk drives and flash drives can also benefit from the method.

  We can refer to this article and check if that helps.

  How zeros external drive using DiscWizard: http://knowledge.seagate.com/articles/en_US/FAQ/205971en

  Alternatively, you can also post this question to the Seagate Community Forums: http://forums.seagate.com/

  Response with the State of the question and we will be happy to offer you our help.

• Installing Windows 8 does not detect my hard drive!

  Hi all! I recently installed a new copy of Windows XP on my computer to Windows 7 and now I would like to install Windows 8. I have no viruses on the Windows XP Machine, then Yes. I boot on my CD of Windows 8 and when it comes to the part where you want to install windows my hard drive is not detected... Strange... Whenever I installed a new copy of windows I've never had this problem...  Instead, I see "Boot: X" and my installation disk. " PleaseHELP!

  Try the following

  Boot from the DVD Windows 8

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

• Win 8 does not detect graphics "AMD RADEON HD M 8750" correctly in Device Manager

  Hello, my Windows 8 may not correctly detect my graphics card, which is "AMD RADEON HD M 8750. When I open the Device Manager, it is in the section "Other devices" and called "Video controller" and when I tried AMD Catalyst it says: your computer does not contain a correct graphics card. What should I do?

  

  Original title: device not found

  Hey Amir,

  Yes, it could be a problem with the hardware. I recommend you contact the Support of AMD for better assistance.

  http://support.AMD.com/en-us/download

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• My computer does not detect the hard drive or show

  Hey Microsoft,

  So, I have a Windows Vista laptop and earlier this year, my computer suddenly won't detect or display my CD player. And when I go to disk management, there is no assignment of letter or anything, just an empty space. Please help me! Thank you!

  -Maryse

  Hello

  1. you are using an external CD/DVD-Rom?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below t help solve the problem.
   
  Method 1
   
  Run only the automated fix this program from the article mentioned below.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
   
  http://support.Microsoft.com/kb/314060
   
  Method 2
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  I hope this helps.