Win vista to win 7 upgrade

Similar Questions

• Reinstall Windows 7 on hard drive again with only the Win 7 Upgrade disc?

  So I have an e9180t which, like clockwork, freezes after about an hour or two after the boot.  I thought it might be the curse of bad mothers, with what they came, but I hope that it is something else so test everything I can.  I noticed that it does not freeze upwards when it is started in safe mode with network.  The hard drive failed the test SMART so I wonder if it's time to replace it as if that has anything to do with the crash.   I can move the cursor, but no applications will be open and eventually everything becomes insensitive causing be tohit the power button to restart.   I already stopped unnecessary startup programs and it will still freeze in unsafe mode.

  The PC came with Vista and I think it's what's on backup hard disk partition.  I have the disk Win 7 Upgrade from HP.  My questons are-

  1. If I buy a new HD 7 upgrade disc will be enough to install the full version of Win 7?

  2. anything else I should do when I install the new HD and more to reactivate Windows?

  Thank you.

  Hi Mike,.

  Have you created a HP recovery disk to reinstall the factory image when replacing the HARD drive?

  It sounds like you have maybe a problem creating the recovery discs now.

  A Smart HARD drive test failure points to a HDD failure. The symptoms you are experiencing are likely caused by this fact. You can also have a card mother or any other hardware problem.

  You have the key to drive and Win 7 Upgrade product.

  I'm pretty sure that the upgrade to Windows 7 to be launched from Win Vista. The upgrade of Windows 7 is a full installation of Windows, so this isn't the problem. But he can't run the installation unless you start the upgrade in Win Vista. Normally, an upgrade to Windows 7 is launched within the current operating system, Win 7 valid existence of an eligible OS Setup and then request a restart to complete the installation of upgrade.

  You can replace the HARD drive and try to install Win 7 itself. If this fails and you do not have the Vista recovery discs, you can buy an HP recovery disc set here. There are three different versions. Select one that corresponds to the operating system that is installed at the factory.

  You may have another problem to replace the HDD with a Format HDD advanced most recent. Please see thisHP Supportdocument for more information.

  If you cannot install the upgrade Windows 7 itself or Win Vista because of the issue of the Advanced Format HARD drive, you may need to purchase a copy of Windows 7 OEM.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Can I use my Win 7 Upgrade disk to do a clean install on my desktop that my old laptop has now been destroyed. ?

  Ok.. I bought a laptop with Vista pre installed Sony.

  Then, I bought a copy of Win 7 Upgrade to upgrade, I did.
  Shortly after, my laptop broke and I got a new laptop through my insurance company which had Win 7 pre installed. I just got a new desktop PC and was wondering if I could use my Win 7 Upgrade disk to do a clean install on my desktop that my old laptop has now been destroyed. ?

  As long as the original computer disappeared, I think you can use the upgrade on another computer...

• Win 8 upgrade and Express Gate

  How this will be achieved with ASUS Express Gate.  I have an ASUS Eee PC 1005 HA Win 8.  In this implementation, Express Gate is autonomous and does not seem to create it's own partition.  He did install Dual Boot.

  Yes, Express Gate will need to be reinstalled.  Yes, it will be set up (or try) Dual Boot.

  Please note that assessment 8 WIN makes no mention of Express Gate.  It is perhaps a good sign.

  The upgrade from WIN 8 will tolerate this.  Even XP is not fast on this little guy so express gate allows quick searches on the internet.  That, the Excel and Word viewers is all about the this bug is needed to.

  The other candidate to win 8 upgrade (Vista) uses a different version of the Express Gate.  In this case, it is evoked through the BIOS switch and the main program is simply Program Files. It should work very probably.

  While we are at it.  After execution of the evaluator, will be the low loader know that the 1005HA is 32-Bit device?

  Linux start-up ExpressGate does not seem to occur after an upgrade for an ASUS 1015PEM from Windows 7 Starter to Windows 10 via the upgrade from Ms.

• Satellite A350 - cannot order the Win 7 Upgrade - problem of credit card

  To the right,.

  I bought a laptop, A350, in 2009 and ordered to Windows 7 using the www.toshibawin7upgrade.com program, but I couldn't get anything from anywhere until today.

  Recently, I asked the delivery during 2 months nothing delivered, but the team behind this program cancelled my order. (Order No.: 4440058036)

  Day before yesterday, I ordered again (order No.: 4440124899) but this time another email was sent on my credit card because they could not charge the card so that they are not able to send the Windows 7 upgrade.
  In addition, it is mentioned to get in touch with the service the customer in Turkey, but the phone number provided on the page does not work.
  I don't know that my credit card works because I order a lot of stuff from other Web sites in the world.

  Almost 3 months ago, I still don't know where to contact them and how to order the Windows 7 upgrade.

  I hope that during the purchase of computer A350 laptop brand TOSHIBA, but today I am considering my decision isn't true at all.

  Please tell us how to deal with which to order Windows 7 upgrade as announced at the sale of portable for the A350.

  Kind regards
  ALP

  Hello

  For me, it looks like there are some problems with the credit card.
  Who knows what makes you wrong maybe that you have entered the right number or missed something maybe, there is another problem with your credit card
  In my opinion, you should get in touch with your Bank and should ask what could be the problem

  Here are the other Toshiba page where you could ask a support team for assistance if a problem with Win 7 upgrade kit would appear.
  https://www.toshibawin7upgrade.com/Endcustomer/ContactUsForm.aspx

  Welcome them

• Win anytime upgrade Windows 7 home prem 64 bit to Ulitmate - unrecognized failure + prod key.

  I have a fairly new laptop np700g7c from Samsung that came with OEM Win 7 Home Premium.  I discovered that too late that this version of Win 7 does not allow backup to NAS - just will not see my SIN.  Apparently this only possible with Win 7 Ultimate (I got on my last computer so no problem) or professional.
  To help to win anywhere, anytime upgrade on computer, I checked if I could upgrade my 64 bit Win 7 Home premium to Ultimate and am OK for Ultimate or professor.  I downloaded the Win 7 Upgrade Advisor tool, and the report said I could upgrade to Win 7 Prof or Ultimate.
  The use of Win Anytime upgrade I paid £127,07 GBP for the upgrade to Win 7 Home Prem to ultimate and received the Upgrade button and it printed properly.
  Clicked to level and product key is automatically applied.  Soon, she returned this upgrade has failed.  Suggested try again.  When I tried again my product key was not recognized, so installation would not start.
  I paid my money and can get nowhere.  I feel also "had" that I can't use backup for my SIN in the first place, but I gritted my teeth and paid my money but now have lost money AND cannot be upgraded and am in a complete mess.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Problems of 64-bit Vista Home Premium, Ultimate upgrade

  I recently bought a laptop HP Pavilion dv4-1144us with 64-bit Windows Vista Home Premium (with SP1) pre-installed electronics Fry as well as a copy of the upgrade to Windows Vista Ultimate Edition (with SP1) because I need to the ability to connect to a domain when using the laptop at work.  After installing Office 2007 Standard and by ensuring that the new Windows Vista laptop basically work, I tried to run the installation from the Windows Vista Ultimate 64-bit Upgrade disk and found that, after an hour or two of an upgrade treat it to race end in a non-descript "cannot upgrade one or more components.  Error Windows will restart and cancel the upgrade. ", after which he ends by turn to Vista Home Premium.

  After doing a little research online (on TechArena) and I have re-tried the upgrade again after:

  In Control Panel-> programs and features:

  -Deactivation of Microsoft.NET Framework 3.0

  -Disable remote differential Compression

  -Deactivation of the replication DFS Windows Service

  Disable Norton Virus and Internet Security software pre-installed

  Disable the Windows Firewall and defender.

  Uninstalling Quicktime and AIM.

  Disconnect all other devices to a USB mouse.

  However when "Compatibility Check" of the upgrade at the beginning, he warn a problem with a filter 'keyboard '.

  (no further details) which I think can refer to the HP software that implement quick launch the laptop keys.

  So I downloaded and installed the latest version of the HP Quick Launch Button drivers on the HP Support page:

  ' HP Quick Launch buttons Date: 08/2008 Version: 6.40.8.2 H size: 20.97 M

  and I tried again, but still without success.

  Note: I can not run the Windows Vista Upgrade Advisor, as recommended because it does not work on Vista 64 bit.

  However, there are standard HP and Microsoft Vista + Office + MessengerLive software installed only at this stage.

  Are there additional clues on what to try next?  Has anyone experience this problem?

  -Greg

  You can try to uninstall the filter on the keyboard until the upgrade is complete...  In Device Manager, go to 'View' and select 'show hidden devices and then go down to "Non-Plug and Play drivers" and made a right click on the keyboard/HID filter drivers and uninstall (remove also the softare upon request).

• Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  Hello

  The best way is to clean install and start over.

  In addition, it is not legal to have both installed version that the license is for a single installation.

  If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

  See you soon.

• Windows Vista to windows 7 upgrade - making circles in the round

  I tried to upgrade Vista to windows 7 using the Microsoft Web site.

  The Upgrade Advisor confirms that I am compatible.  It contains a link to «get detailed instructions on how to upgrade»

  Step 1 of this guide request control panel > system for confirmation of the version and ends with "Next - install Windows 7 using the upgrade option.

  This opens another window titled "windows anytime upgrade".  With an option to "compare the editions of Windows Vista" clicking this takes you to another window titled "Windows 7 Upgrade Advisor" which does not allow to download the Upgrade Advisor, which is where I started

  Help

  http://Windows.Microsoft.com/en-AU/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  Windows Anytime Upgrade is no longer available for Windows Vista.

  If you're running Windows Vista and want to upgrade your PC, go online to upgrade to Windows 7.

  Click on "upgrade to Windows 7" leads to:

  We're sorry, the requested page is not found.

  The URL may be misspelled or the page you are looking for is no longer available.

  As I said, that Microsoft sells more than 7.

  We do not work for Microsoft.

  We are mainly volunteers here; all other such users that help the posters in our time.

  As to why, you ask Microsoft.

  Kind regards.

• Unable to connect to the internet on vista. Will aid upgrade of windows 7.

  I can not connect to internet on my laptop Toshiba running Vista Home Basic.  My computer detects the wireless router and I tried the wired connection with no result.  When I run the repair of the network it is said that the diagnostic policy service is not running.  I tried the advice from microsoft to launch without success.  I am interested in upgrading to windows 7.  I need to fix this problem in vista first, or an upgrade to Windows 7 will solve the problem?

  Hi Francis,.
  sounds like a driver for most problem, and I would recommend a restore to solve this issue of diagnosis.
  However, to answer your question, the upgrade should not severe at all as long as you get the right drivers.
  B Eddie

• I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  original title: to upgrade

  Hello

  Read this information before you buy Windows 7:

  "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  And here is the site of Dell to see if Dell has Windows 7 drivers available for your model

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  See you soon.

• The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Same as title.

  The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Thanks in advance.

  Found my answer. I need Windows 7 Ultimate upgrade to keep existing applications.

• I bought Vista Ultimate professional to upgrade the installed Vista. The 'Upgrade' feature is disabled in my professional (full) Vista Ultimate package. Why?

  Why can't go from Vista Home Premium to Vista Ultimate?

  I have a laptop double boot configured with Vista Home Premium and Windows 7 Professional.

  I bought Vista Ultimate professional to upgrade the installed Vista. The 'Upgrade' feature is disabled in my professional (full) Vista Ultimate package. Why?

  Update requires the same Service Pack level.  For example, if your current Windows Vista Home Premium SP1 or SP2 installed, you will need to uninstall the Service Pack to be able to use the Windows Vista Ultimate Edition disc, you have that has no Service Pack integrated.

  See: How to uninstall Windows Vista service packs as a troubleshooting step

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• Sir, iam not at all satisfied with the functionality of windows vista, I need immediate upgrading to windows 7, please please give me this, I have the version of the license of vista,.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs you are Sir, iam, not at all satisfied with the functionality of windows vista, I need immediate upgrading to windows 7, please please give me this, I have the version of the license for vista, problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought 7 retail to upgrade to Vista and have since upgraded to 10. The product key is coming as invalid

  I have an old laptop that I am trying to set up for my daughter. It had XP on it and I have a physical disc of Windows 7 I have installed on it. I bought 7 retail to upgrade to Vista and have since upgraded to 10. The product key is coming as invalid. I thought that I could use it again since I upgraded from 7 to 10. Is the product key invalid, because I already used it once even if I'm not on 7? Can I buy just a key somewhere or I have to buy a new copy of 7 again? It installed fine that I just can't turn it on. Thank you.

  OT:

  Windows 7 product key

  Because the free update of Windows 10 used the license to the retail of Windows 7 as an eligible basic license, you cannot transfer it elsewhere or you reuse.

  You will need to purchase a new license of Windows 7 or buy a license for version full Windows 10.

  My recommendation to waive the license of Windows 7, I would buy a full version license Windows 10.

  Once you do this, you can just update the values of product key for your system runs Windows 10, and then reactivate the license of Windows 7 by phone.

  Buy Windows 10 family/professional edition

  then

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us