Win XP (Home) - is there any problem of relocation?

Similar Questions

• I've got qcad Professional installed but vista will not open save dxf files. I get dxf is not an application valid win 32. Is there any solution for this?

  I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
  Is this a common problem?
  Is there any solution for this?

  You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
  I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
  The correct procedure is:-
  Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
  There is no problem, with the exception of this incompetence of users.
  Thank you for your time and assistance.

• Vista on Satellite M40 - 285-> is there any problem?

  Hello

  I have a Satellite M40-285, my wish is to install Vista on it, I know about pcmcia issues that lock boot Vista and solve their pcmcia.sys file renaming, but this does not solve the problem really, pcmcia slot and card reader didn't work.

  So I would like to know if Toshiba will launch a driver for Vista, or, everyone has solved this problem with any tip where Vista starts normally and pcmcia works fine?

  Thank you
  Kind regards.

  Toshiba M40 satellite will certainly not throw all Vista drivers or tools. This device is not Vista capable and there is no support for Vista. If you want to test with Vista create the second partition and try to install Vista on it. I did the same thing on my Vista not supported by Satellite M70.

• Is there any problem in the planning of the GATHER_STATS_JOB during peak load times?

  Hi all
  
  The default DBMS_STATS (GATHER_STATS_JOB) job runs during our peak load time.
  
  It will have a performance impact on normal database transactions?
  
  Is it better to postpone this window?
  
  That all the problems can we expect during the execution of the task (locks object, IO high due to table / index readings, high use of the CPU etc.)?
  
  Please help me to get the answer. I could not find the net information.
  
  Thanks and greetings
  Smail

  Sissi C V wrote:
  I'm fighting to find a suitable period for the task that this database is active 24 * 7 in the world.

  I want to know how the activity must be measured. It will be based on the number of sessions or number of transactions or number of cursors or net i/o or a combination of all these?

  Satish,

  If you have the license of AWR, you can consult the AWR reports to see when your database is no longer idle. In the 10 chronological model g, the most significant aspect is the DB time has passed, so the period where the DB time is less could be a good candidate.

  You can also check the number of logical/physical i/o performed every second, the number of sessions and other ratios that appear in the upper part of the AWR (for example the "Load Profile" section) report.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• How to change the o/s of Win XP Home instead of Win XO Pro on the computer without having to format the hard drive?

  My colleague accidentally installed Win XP Home Edition on a computer that we have configured as a server e-mail and files.

  How do I change OS to Win XP Pro without having to re - format the hard drive?

  The Win XP Pro is a supplier for the machine. When you change the hard drive (old one crashed), the o/s bad has been installed as they were also recoverinig another PC with Win XP Home.

  Any advise is much appreciated!

  Hi ChongPang,

  If you proceed with the installation of XP Pro from XP home, it will ask you to upgrade.

  I hope this helps.

• Problems installing drivers after the replacement of Win Xp Home Ed by Win Xp pro.

  Need help.
  I have a Toshiba Satellite M70 - SR2 (bought last December), which came with Win Xp Home Ed pre-installed on it. I remove the home Ed and installed my XP pro Spk2. Now I can't get my wireless connection to communicate with my Linsys router so I can connect to internet, that failed to install the video card...
  I only managed to download and install the audio drivers and the modem drivers.
  I have downloaded the display drivers, unzipped the file but could not install them as I did with the audio drivers.
  In my device manager, I always get a yellow marke in front of:
  Controller - Eternet
  SM Bus controller-
  -Video control (VGA Compatible)
  Can someone gives instructions on how to obtain and install these drivers or where I can find the instructions.

  Thankx

  Hello

  Well, the right installation order is very important because some drivers and utilities can be installed without the other drivers.
  I recommend to follow the installation instructions and install things together.
  If you don't need something then you can remove the bone in Add & Remove software.

  To solve the problem of yellow question mark that you have to install the drivers.
  (At the beginning) chipset driver, Lan/Wlan driver, display driver.

  But if you follow the installation instructions you shouldn't t get any yellow points mark.

  Concerning

• Blue error screen 0 x 00000024 on Win XP Home SvcPK 3. CMP does not start in any mode. BIOS is fine. Surfact of drive test came out negative.

  Here is the full error:

  Stop: 0 x 00000024 (0 x 00190203, 0x88bc3390, 0xc0000102, 0x00000000)

  Whenever the machine is restarted, ^ this number above changes of carrot. all others remain the same.

  BIOS load properly and detect all need too.

  have you tried the following:

  I tried every avaible selection:
  Safe mode
  Safe mode with networking
  Safe mode with CMD
  Last known configuration
  Start WIndows normally
  Select VGA
  Enable Boot logging
  Disable the automatic restart in the event of system failure

  Debug mode
  Directory Services restore Mode

  Recovery Console

  .. .and when I than windows loading screen, I'm going in the restart of the bearing. When starting in safe mode, the list of pilots begins to scroll and always stops in the AVGIDSEH.sys

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  History:

  When the first blue screen hit a week ago, I immediately rebooted in safe mode (windows always loaded then) and conducted an audit by virus with AVG. Then, I updated my Zone Alarm Firewall to the latest version and restarted. There was no sign of the problems that were to come. The next day, I did a little research to see that this error 0 x 00000024 indicates a corrupted registry or the NTFS loader file, among other things. Recommendations included disabling antivirus and programs bad-ware like Ad-Aware, or recently installed programs whose drivers may be at fault. I proceeded to the services.msc and disabled ZoneAlarm both AdAware, then restart. Windows has not been loaded since then this stop only error message I get now.

  I did a test of surface of disc with a utility of the UBCD and negative (found no errors) so I guess that the disk is physically very well. Also, re-installed memory that shows no sign of physical goods or damage.

  The laptop is a Toshiba Satellite and the folks at Toshiba have no respect for my data. They continue with option 1... Re-install windows. I'm not surprised that in the past they have never really been useful and stood by their products, that's why all the customer complaints.

  First of all I need a program utility loader initialization that will allow me to run chkdsk as diagnostic utilities. Please offer your expertise in this area.

  First, start in the XP Recovery Console and running a chkdsk/r.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• I have Windows 7 Edition home premium installed 32-bit update. How can I upgrade to 64-bit? Will there be problems of validation so I re-install from scratch?

  I have Windows 7 Edition home premium installed 32-bit update. How can I upgrade to 64-bit? Will there be problems of validation so I re-install from scratch?

  If you have purchased a retail package, it should include the disk for Windows 7 Home Premium 64-bit. Otherwise, you can download a backup copy at the following link and use the same product key that allows you to enable the 32-bit version. Its a possibility, you may need to reactivate by phone, see below for instructions:

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

  My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
  Why not allow Use Adobe Creative Cloud?

  : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Hello, we just bought illustrator and we checked our bank account, and he is not charged. ¿Pourriez - you please check if there is any problem?

  Hello, we just bought illustrator and we checked our bank account, and he is not charged. ¿Pourriez - you please check if there is any problem?

  Hi Cecilia,.

  I checked your account and it shows the Illustrator subscription be active and the payment has been received.

  Please check the help below document to download the application and get started:

  Using creative cloud | Download, install, update or uninstall applications

  Kind regards

  Sheena

• Win at any time update Win 7 Home Premium to Win 7 Pro?

  VAIO laptop: VPCEG1BFX

  I need to to Win 7 Home Premium upgrade to Windows 7 Pro on this laptop. Can I buy a license and use it anytime upgrade? THX.

  Thank you, Mark! I get a page error that is no longer available but. Suppose that I have to go buy a license of Bill Gates.

• My original OS 7 Home Basic Edition (purchased): problem of Installation of Win 10

  Windows has AUTOMATICALLY upgraded to Win Ultimate who, as the replies received from your good end, has been described as false.

  To date, I had downloaded (free) Win 10, but when installing, I received a msg stating putting touches of the original VER of Win 7 Home Basic Edition (which I bought) and then click Refresh.

  Please notify: (a) I would require to REINSTALL my house 7 the CD database (since upgraded Ultimate is false since it was produced Acer OEM - SLP Win 7 Ultimate, and mine is customer built Gigabyte motherboard) before Win 10 could be installed.

  (b) if I didn't need to REINSTALL WIN 7 Home Basic, then how and where to insert the product keys (for Win 7 home basic) to allow the installation of win 10?

  Windows 7 can not auto-level to a ultimate edition. He must intentionally upgraded or a non-genuine Windows 7 Ultimate product key has been used for the Express upgrade.

  Your best option is to reinstall Home Basic, reactivate and then upgrade.

  Or, if you have basic Windows 7 Home Edition product key, you can use it to perform a new installation:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  Resources:

  How to download official Windows 10 ISO files

  How to: perform a clean installation of Windows 10

• problem with upgrade from xp to win 7 Home premium

  After an update from xp to win 7 home premium and unable to play games, I found that xp and win 7 Home premium are not compatible. Is it possible to install vista (well that it may not be registered on this pc because I will only be borrow) then directly upgrade to win 7 Home premium?

  Have you tried to install the games in Mode "compatibility"?

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Learn how to use the Mode of Windows 7 compatibility with legacy applications
  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com