window 7 not enabled

Similar Questions

• THIS COPY OF WINDOWS in NOT ACTIVE but no activation Wizard message

  Our Lenovo computers (PC has been used for two or three years) began to show the message that "this copy of windows is not enabled, in order to be properly operated under license from this copy must be enabled ' but I didn't activate the windows option in system tools and can not run the command to start the Activation Assistant.  Tried to call support and after I explained all this to several people, the last person to take my call gave me activation line which I couldn't use sinceI can not run the Activation Assistant.  I tried a tool to re - enter the product key in case that was the problem, but the key is the same that has already been registered.  Don't know what else to do.

  Hello

  ·        What version of Internet Explorer is installed on your computer?

  Try the steps in the below article data and check if this is useful.

  http://support.Microsoft.com/kb/312295

  Also check

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/855fe79d-3f8e-454c-b2ba-83486be5459f

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This copy of windows is not activated __Does not accept a genuine product key

  I have a toshiba laptop and due to a problem, I had to do a repair. I didn't have the original CD so I performed a repair using CD Dell since my friend had. Now, when the repair is made I get a prompt "this copy of windows is not enabled" when I tried to activate the copy by putting in the key I got Toshiba you receive an "invalid product key" error

  Is there a way to activate this copy with my old toshiba key?

  What are some of the other options I have available?

  Thank you

  Sorry, but you cannot use a Dell CD on a Toshiba computer.  You will need to contact Toshiba and ask a Windows system designed for your specific computer model Toshiba Recovery disk: How to replace the lack of software Microsoft Carey Frisch

• Media.Windows - Media - foundation.enabled set to false does not stop the MP3 files to play rather than the economy. I want my file save instead of the rear. How?

  I used to be able to click on the MP3 files and they would save, according to the setting in my Options. Now when I click on a link to an MP3 file, it goes to a player page, I don't want to.

  I looked through the help here, and it is proposed to amend media.windows - media - foundation.enabled to false. I did, and it made no difference. (Restart after making the change did not help either.)

  I use version 26.0 in Windows XP. I had not downloaded MP3s since July, so I don't know which version this started.

  Windows XP uses Media Foundation, it uses DirectShow (DirectX). To turn it off, it was a different preference:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled from true to false.

  I don't know if this changes enter into force immediately or after you exit and then restart Firefox.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• Windows Firewall is not enabled...!

  Windows firewall in not enabled.

  I want to update my windows store application but a message that windows firewall is not enabled.when I guess the do, it dosent happen.

  a mistake is diplays i.e. 0 x 80070422

  This is something serious because I want to upgade windows 8 to 8.1.so please help!

  are the specifications of my laptop;

  Core i5 3210 m 2.5 gz

  6 GB of ddr3 ram

  hard drive 750

  OS 64-bit of Windows 8

  internet connection broadband.

  Hello

  Thanks for the update.

  -Download, install, update FREE Malwarebytes Anti-Malware'

  http://www.Malwarebytes.org/MWB-download/

  (do not install a Pro version or trial)

  -Perform a quick scan and see if something is detected - clean infections.

  Finally, follow the instructions in this article MS-> http://support.microsoft.com/kb/2519899/en-us

  Click on the thumb of white LAURELS (left). This way you'll testify for advice or help you have received.  If your problem has been resolved - click on the appropriate button and accept the solution. ***

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get dumps mini message not enabled by default on client versions of windows

  Mini dumps not enabled by default on client versions of windows (message I get trying to open minecraft download for my children)

  [Original title: minidump]

  You are facing the same problem when you open another program or application?

  Try to update your drivers Windows and graphics card.

• activate the audio service I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. ». Vista and the error are sometimes get is 1079.

  I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. "I've tried everything suggested to obtain a permit.  I am running vista and the error is sometimes get is 1079.

  Help, please. randean

  Hello
  I tried, but I can't yet begin widows audio service even if the windows audio endpoint is fine. miracle happened just after I tried one of the recommended web u, it finally works. IM so happy.
  the solution is to change the name of connection for NT AUTHORITY\localservice
  Thank you very much
  Have a nice week

  Seera

• My computer windows vista laptop says that it is not enabled. When I try to 'reactivate' using the code stuck to the computer, it fails. What can I do?

  So, to my office, I have a laptop HP under Vista Home Premium x 86.  All of a sudden he says he is not enabled.  All my attempts to activate it using the code stuck on the PC itself did not work.  I need to get this computer to work properly, and I can't risk having a problem with him on the road.  My attempts to contact HP only ending with them telling me that they could remote virus scan and it would cost me over $ 100.

  I also bought a vista "anytime upgrade" and it won't let me even upgrade the system without the activation code.
  Help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Error: Windows Update cannot enabled updates, because the service is not running.

  Original title: update for windows vista.

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Windows (sometimes) tells me that the anti-virus, I have installed in my PC is not enabled. I press 'Activate now' it lights.

  Hello ' I have a little problem "when Windows starts the windows sounds (sometimes) the anti-virus, I installed in my PC is not enabled and the anti-virus is already registered and activated and when I press"Activate now"it does." any solution to this little problem? the still active anti-virus when this message appears "Windows security alert" and is the anti-virus still running even this alert? TQ

  Hello

  -Which antivirus program is installed on your computer?
  -Did you change your computer, after which the question began?

  Maybe your computer is infected with the virus that prevents you from turning on the anti-virus software.

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Put your computer in safe mode with network, download, install and run Microsoft Safety Scanner and check if the problem is solved.

  Note: You may lose data that is affected while eliminating malware.

  Step 2:

  Check if you can activate the anti-virus ├a the State to clean up the boot program.

  Note: Follow step 7 to your computer as usual.

• "Windows defender is not enabled" when you try to disable startup programs

  Original title: "Windows defender"

  I would like to disable some programs to run at startup to the top. However whenever I go to the control panel and click on startup programs it tells me that my windows Defender is not enabled. When I try to turn it on nothing happens. Any suggestions as how to solve this problem. Thnx.

  Hello

  Windows Defender is probaby blocked from running by your AntiVirus so use them to set the
  Programs start as you wish.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ===========================================

  Refer to this topic for many more excellent tips.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I try to install itunes I get error "windows install is not enabled.

  When I try to download and install itunes on my PC I get a notice that says that "windows install is not enabled...". How can I find the installer of windows and turn on? Thanx

  When you try to download itunes, download is stapped with a notice saying: "windows install is not marked on" how to find the windows on my PV Installer and turn it on?

  Here's a solution: go to start / Control Panel / Administrative Tools / Services and select Windows Installer.  Double-click it to open it.  Make sure that it is set to automatic (change it if it's not).  If it is running, stop it and then restart it again.  If it is stopped, start it just.

  If this does not work, try to run the Windows Installer Cleanup of http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html utility and see if that helps.  You may need to restart the service after you have done this, and you may also have to restart.

  When you retry the installation, right-click on the executable installation file and click Run as administrator.  It is sometimes useful.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.