Window bug pattern

Similar Questions

• apparent spread of permissions / legacy - windows Bug problem

  IM using XP MCE and it is the series of events that will make a beginning user who uses to get frustrated because simple file sharing. I am writing here because fresh MS of money and doesn't promise to repay if its their fault. If they read it here so someone can go and fix it.

  create a folder on a removable disk to NTFS structure. on the computer #1
  take it to another computer #2 and plug part in the folder at the base of your folder structure.
  Browse the directory shared computer #3. you will have permissions issues trying to access subfolders.

  You can't see this problem often. but I replaced my main computer (#1, win2k) during one second (#2, XPmce) and then I tried to access the share on my laptop (#3, XP) and I'm in trouble. computer #2 is not propagate permissions. and it doesn't seem that 'old' owner of the files is the problem. separate and resharing does not work.

  disable file sharing simple, then selecing all subfolders (only) and the owner allows display to a level more in but no access... given that the subfolders (1) and (2) the files [and probably as well folders] inside those - all do not inherit reset and nothing more inherits 'everyone '.

  the next step is to do a blind search and download all your files and folders to come in the search, sort by name, select the folders, set them to inherit, then select the files and put them to inherit.  However, due to the popular archives you might have some difficulties to do - you will need to disable the first if you have items from archives showing - which prevents the development of authorities of the properties. If the archives are still show amoungst the files after you turn off, then you will need find again all files of less than 100 KB and the foldes will show with less archival.

  as the owner [was] a code: S-1-5-21-11... I use SP2, but make sure it has not been fixed already, I googled "propagate permissions fix" and nothing turned up.

  I hope that this issue is resolved soon, but I've always felt a barrier to inform microsoft of their bugs (and suggestions). I hope this works.

  I have also seen files created by programs not inheriting so... an example is found here:
  http://social.technet.Microsoft.com/forums/en/itprovistasecurity/thread/aaca354b-6bf5-4273-b77b-51e0234de7c1

  Maybe this bug has not been seen by microsoft:(oh bien.) Then, I wrote this to help people and stop their frustration, even if the fix is almost equally frustrating.

  HC.

  HC,

  Ok. Here's what's happening.  When the files have been created on the computer #1, they probably belonged to the user who created them.  Note that I mean by 'user', the SID of the user or the number of S-1-5-21-11 [...] you quote - this is a unique identifier for this user on this computer.  When the disk has been moved to computer #2, this user did not exist on the computer, and so the only access to the files is no matter what permissions have been granted to general users on these files.  Whenever someone tries to access these files by connecting over the network to the computer #2, they will always authenticate as user 'Guest' (if Simple file sharing is enabled) or as any user computer #2 they authenticate (if Simple file sharing is disabled and not a computer in the domain).

  So, it seems that you want to give "Everyone" access these files on this external drive which is mounted to #2 computer network.  Turning to the bottom line...  I'm a fan of control in command line.  The 'cacls' command will do what you want with a single command.  So, assuming that this external drive goes up on computer #2 in the E: drive, perform the following steps:

  1. Connect to the computer as an administrator user #2
  2. Open a command prompt window (start-> Run-> "cmd")
  3. Enter the following command in the command prompt window:
     CACLS E:\/t/e/c/g everyone: F

  This will give "Everyone" permissions Total (: F) everything in the E: drive (the/t option will include all subdirectories).  If you want only to give everyone read-only permission, simply replace the: F with: R
  For more information about the CACLS command:
       <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  Alternatively, you can take ownership of these files and folders on the computer #2, and then assign permissions that you need:
  "How appropriate a file or a folder in Windows XP"
      <>http://support.Microsoft.com/kb/308421 >
  "How to set, view, change, or remove special permissions for files and folders in Windows XP"
      <>http://support.Microsoft.com/kb/308419 >

  HTH,
  JW

• Object &gt; transform &gt; scale window bug

  Hello all Im having a really strange problem with the window of the scale that really kill my workflow so I wanted to see if anyone has experienced the same problem and if there is a possible solution.

  The problem is with the window scale under the object > transform menu.

  In all versions of CC so far this scale window opens with the active and ready to enter scale percentage field in.

  This changed with the latest update to Illustrator and the window now loads with no active field so now you must manually click and start typing

  Im sure it's a bug because all other windows in the menu transformation taking place load with active ready to type into the fields.

  This may seem like a very minor thing but I use scale constantly through keyboard shortcuts and the call was in full that I don't have to manually click on the ground and due to the shortcut I can avoid clicking in the menu all together that speed up a bit of my workflow.

  IM on the last version of the CC on a MacBook Pro running El Capitan 2013.

  Joint a screenshot comparing the previous path, the window worked on the left and the current way it loads.

  Any help is appreciated.

  See you soon

  

  petrespassov I have the same problem with the percentage field not be active when the scale of an object. It is really slow down my work flow. I talked to tech support and they have no solution I filed the bug report form I encourage others to do the same so they fix.

• Window bug Expression SOA JDeveloper 11.1.1.5.0

  Hello
  
  I use JDev 11.1.1.5 version and SOA Composite Editor 11.1.1.5.0 for SOA development. Problem is that I am not able to open the window of expression in order to assign an expression to a variable of bpel in SOA project. Is this a bug with JDev or something else?
  
  Thank you

  Hi bpeltechie,

  Please tell us what who and how you try to do?

  I believe that you drag the icon of the Expression on the target variable and it does not open the window of Expression for you to add content.

  It's certainly not a bug and problem with Jdevelper individual as it works fine in my case and many others still too I know. Yes, in some cases, I saw him take a long time to open in front of which the user patience usually gives upward.

  Assuming that you have already tried to restart the machine and Jdeveloper (otherwise try it please), I suggest you reinstall the Jdeveloper after completely installing it and delete the folder in the following location also.

  C:\Documents and Settings\\Application Data\JDeveloper

  Test and let us know how it goes.

  Kind regards
  Neeraj Sehgal

• Black window bugs and crashes and falls down, and WHAT's the PROBLEM?

  First of all, I thought the problem was that my employer still uses Windows XP, with layers of custom on top security. But it happens at home, on my netbook XP vanilla.

  So I thought that the problem was of XP, which is, after all, obsolete. But now it happens on my brand new laptop weeks running 64-bit Windows 7 Professional.

  Here are the problems:
  (1) for the recovery of the standby mode or when I plug it on a second monitor, or even just to have the display closed briefly, Firefox fails to redraw the contents of the window. I just get a black window empty until I have resize or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.

  (2) Firefox sometimes do not redraw little matter what I do. I just had a completely black window, and when I clicked on the close box, a msgbox jumped up, completely black inside, with a title like: "are you sure you want to close? I could not see even the 'yes' and 'No' buttons, and clicking on where they are usually did not work. I ended up closing by pressing the Enter key.

  (3) sometimes these problems are accompanied by a small vestigial micro-fenetre, which has no content, no close button and no control resizing. Is this nothing window with no title, but the title bar is long enough for characters may 20. The last time this happened to me, nothing window had a cursor flashing text inside, but typing had no effect. The only way to get rid of the micro-fenetre is to close every single instance of Firefox and wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.

  (4) all my favicons disappear when I updated Firefox on my work XP computer, and they refuse to come back, even when I revisit Web sites.

  Computers involved are:
  Reference Dell E4200 running Win XP Pro
  NetBook Acer One Win XP family
  Vostro 3350 running Windows 7 Pro

  All 3 computers running Norton Security Suite (The E4200 runs a care company, the other two are conducted in free version of Comcast)
  And all 3 computers were connected to a video Displaylink adapter USB (for a 3rd screen) at one time or another, which means that the driver is loaded on all computers, but these problems occur without any external monitor connected at all.
  Everything else is pretty vanilla.

  I get these questions every other day or two and it is really starting to annoy me and make me worried that Firefox is unstable, with me afraid that no matter what unsaved work or even data from my hard drive may be at risk.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Progress window bug

  Im hoping someone can help me. Recently, the progress bar on my computer vista laptop, whenever I have remove, move or copy an object, rest on screen stuck at 0%, even if she has already completed. It remains on the screen and wont close unless I use the Task Manager to end it, that reboots completely explore. I thought maybe it was a virus or malware, but I scanned for malwarebytes and safe mode, using avast. Both were threats, but even after their removal, the problem still remains. I'll add a link to a screenshot of the problem. I hope someone is able to help.

  Hello

  It would be a good idea to run the System File Checker tool:

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
     /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

     If SFC detects serious flaws, you may need to perform a repair upgrade Installation.

     "How to perform a repair for Vista Installation"

     http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Windows - bug or feature photo gallery?

  While using WPG to display pictures in a file, by clicking on the right arrow to move to the next photo normally appear the next photo in the line, as displayed in the window of the file. Sometimes, however, it makes the photo appear in the same column in the next row (i.e., it advances to the bottom of the column instead of all the tier).  Same effect when you use the right arrow on the keyboard.  I accidentally changed a setting, or...?

  Thanks, J, but no cigar.  The files in the folder are sorted alphabetically, and all start with the letters.  The behavior looks like really intentional: when WPG enters the 'mode' (for lack of better term) the securities down the column, as he works on another linked list.  I'll try resizing the window to the folder, so there is a different number of columns.  I'll make the results later.

  Ok.  I resized the window of five icons across six folder and launched a new WPG by double-clicking an icon.  Not only the new WPG worked properly, but the old we started work correctly as well.  Go figure.

  Not really a solution, but a useful workaround solution.  I'm always curious to know what caused her to go according to the columns in the first place.

• Adobe Premiere Pro bug with Mac News El Capitan. Project window bugs when paused/stopped (including screenshot)

  I just upgraded from Yosemite to El Capitan, and when I started editing with Adobe Premiere Pro, my project window would look like this in pause/stop:

  

  If you had read this forum for 2-3 weeks, you would have seen a TON of these... and there are also many other problems of El Capitan. Not only for Adobe, but for all kinds of software. Heck, even the crowd of MS Office is angry against El Capitan!

  If you can, roll back to Yosemite... There is a thread, you should find in a search with the statement on this.

  Otherwise, to do this, go to project settings... Acceleration of mercury... and together for the only software rendering. A box should then appear, and in this document, select "remove the Previews. Close & restart.

  And... screaming Apple to get them to pay some attention to their 'old style' user-base of the computer. They fell in love with devices, and you're so old school... at least for them...

  Neil

• Arrangement of windows bug

  Hello.
  
  I use Adobe flash CS3 on a 15 "display at a resolution of 800 x 600.
  
  I moved my window property inspector to the lowest position on the screen - middle, low center - and found that I couldn't get it back. The closest I can get to the property inspector window now is the two-way arrow for resizing. Despite clicking on it, the window refuses to answer the two-way arrow (its coastline in). Everything else works fine.
  
  I tried reopen Flash, but flash memory where are stored the windows. It makes no difference if you open different project files. I tried using the menu and the shortcut key to switch from the Properties window on / off power, without success. I tried to change the resolution of the screen at a higher resolution, but the arrangement window Flash relative is not objective. I think my only alternative is to reinstall the flash.
  
  If you know anything else I can do, thanks for posting. I find it extremely frustrating.
  
  Yours Sincerely,
  Christopher Jenyns, b. a.

  Ok. Disaster averted! Problem solved.

  I found that if you choose "Window-> Workspace-> only default icons", window snaps back on this fault and everything is ok.

  Talk about frustrating.

• 3.1EA1 - OSX problem coloring result window

  I'm on OS x with the Look and feel of Mac.
  I checked the option "checkerboard grid or pattern Zebra".
  It is a nice improvement over the previous version, but I would like to change the colors.
  I can live with the yellow and reddish Browns alternate pale colors, but when I select a cell or the cursor around a cell to another cell "active" Gets a thin blue border and the text goes from black to white.
  On red light brown, it is possible to see the text, but it's a real eye strain.
  On the clear yellow, however it is impossible to see what is the text.
  
  How can I change the color of the text in the current cell or the background color of alternating rows?

  kfritsche-

  Same thing happens on Linux (& I assume Windows)
  Bug 13092749 - 3.1EA1: ZEBRA STRIPE SUBSTITUTIONS SELECTION GRID BACKGROUND MAKING INVISIBLE TEXT

  FYI: you can change the font used in the spreadsheet calculation and grids via preferences-> Code-> Fonts Editor, but not the color.

  Brian Jeffries
  SQL development team

• Bootcamp blocks windows 10

  Hello everyone

  I own a macbook air mid-2013 and I tried to install win 10 on it. I used Bootcamp to download supported drivers. Like many of you I had as we the trick to skip installing the audio driver realtek to install the drivers to support. After that I installed it manually via the file on the usb key. But now whenever I start windows, it crashes on me after 2-3 minutes. I get the blue screen of death, saying: I had a "kernel security" check failure. I am sure that the bootcamp software is the fault. I am really frustrated. Does anyone of you have similar problem and has someone already reported such things to apple? I mean it's that apple is not able to provide drivers of ridiculous work. I call the apple support. Here's the Windows bug report.

  Computer name: computer DESK-IMM6ITP
  Windows version: Windows 10, 10.0, build: 10586
  Windows dir: C:\Windows
  Material: MacBookAir6, 2, Apple Inc., Mac-7DF21CB3ED6977E5
  CPU: GenuineIntel Intel (r) Core i5-4250U CPU @ 1.30 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4232339456 bytes total

  Crash Dump Analysis

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  We Sun 20.03.2016 22:21:18 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-8140-01.dmp
  This was probably caused by the following module: win32kbase.sys (win32kbase! GreDeleteSemaphore + 0 x 24)
  Bug check code: 0 x 139 (0xFFFFD00020806450, 0xFFFFD000208063A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  file path: C:\Windows\system32\win32kbase.sys
  product: operating system Microsoft® Windows®
  company: Microsoft Corporation
  Description: base-Win32k-Kerneltreiber
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  We Dim 20.03.2016 21:44:14 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-6437-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD00087D57750, 0xFFFFD00087D576A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We Dim 20.03.2016 21:41:20 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-11671-01.dmp
  This was probably caused by the following module: ntfs.sys (NTFS! NtfsFlushVolume + 0x9DD)
  Bug check code: 0 x 139 (0xFFFFD000206B2F60, 0xFFFFD000206B2EB8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: operating system Microsoft® Windows®
  company: Microsoft Corporation
  Description: NT-Dateisystemtreiber
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  We Dim 20.03.2016 21:39:42 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-11140-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD000221F5750, 0xFFFFD000221F56A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We Dim 20.03.2016 21:36:15 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\032016-10859-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD0007A8CD750, 0xFFFFD0007A8CD6A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The sea 16.03.2016 13:38:57 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\031616-11046-01.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bug check code: 0 x 139 (0xFFFFD00021765750, 0xFFFFD000217656A8, 0 x 3, 0 0)
  Error: KERNEL_SECURITY_CHECK_FAILURE
  Bug control description: the kernel has detected a critical data structure corruption.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The sea 02.03.2016 16:20:35 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-14546-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2C8, 0xFFFFE000FE7C77C0, 0xFFFFF801FD3E107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:13:00 GMT your computer crashed
  crash dump file: C:\Windows\Minidump\030216-13031-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2C8, 0xFFFFE001AE2037C0, 0xFFFFF801CBA4107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:10:31 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-14140-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2A8, 0xFFFFE001E32AF480, 0xFFFFF801AA9B107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  The 02.03.2016 sea 16:06:46 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\030216-12437-01.dmp
  This was probably caused by the following module: keyagent.sys (KeyAgent + 0x107C)
  Bugcheck code: 0xC4 (0xF6, 0x2D0, 0xFFFFE000BAA5E080, 0xFFFFF800BF58107C)
  Error: DRIVER_VERIFIER_DETECTED_VIOLATION
  file path: C:\Windows\system32\drivers\keyagent.sys
  product: Boot Camp
  company: Apple Inc..
  Description: KeyAgent Apple driver
  Bug control description: this is the code of verification of general bug for fatal errors found by Driver Verifier.
  A pilot made reference to a handle from user mode to kernel mode. This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: keyagent.sys (Apple KeyAgent Driver, Apple Inc.).
  Google search: Apple Inc. DRIVER_VERIFIER_DETECTED_VIOLATION

  What is the possibility of installing W10 and installing the drivers for keyboard, mouse, GPU of BC6 records, but not by using setup.exe? This will leave some of your hardware Apple works does not as expected. This is a test.

• Problem Bluetooth satellite P70-B-102 - upgrade to Windows 10

  Hello to all forum users.

  I have a laptop Toshiba Satellite P70-B-102 with the operating system Windows 8.1 in Portuguese.

  The problem I have is that I can not upgrade to Windows 10, since, according to the upgrade of Windows application, the computer cannot update the Bluetooth drivers, including the following: Bluetooth RFHID, RFBNEP, RFBUS and RFCOMM.

  This situation remains at least a month and a half and I can't update windows to version 10.

  Can someone help me solve this problem?

  Thanks for your valuable help!
  Pedro Moura

  It's very strange... I think it must be some kind of Windows bug... I recommend you check if all Windows updates and patches are installed.

  In addition, the unit is listed as a supported upgrade Win 10 model, so win 10 update should be possible.

  The unit is here: http://win10upgrade.toshiba.com/swup...spx?region=TEG

  Win 10 driver can be downloaded and updated from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  but in case the upgrade of Windows 10 using the automatic upgrade procedure does not work, try to improve Windows 10 using the media creation tool
  http://Windows.Microsoft.com/en-us/w...n-tool-install

• Satellite U400 - 13K PSU45E Windows XP & 4 GB RAM

  Hello!

  I have a Satellite Pro U400 - 13K (model: PSU45E-00800DGE), with 4 GB of installed RAM (800 MHz). I used to work with Windows Vista Business SP1 32-bit, which was the pre-installed operating system, and I could see all the 4 GB of RAM in the properties of "My Computer".

  Last a few days and aftert 2 years of work with Windows Vista, I decided to downgrade in Windows XP Professional 32-bit, as I faced incredible problems with performance. Even though I had very low temperature on my proceccor carrots and only 4-5 open applications (Ms Outlook, IE, Adobe Creative Suite CS3 and a little more), I looked at my phone to freeze for about half a minute and still to come! I have spent many months trying to figure out what's wrong, I changed the machine, I reinstalled the system several times, but when there was a big load, that happened more and more often. So after reading a few posts on several forums, I realized that Windows XP need fewer physical resources for the same things and I decided to downgrade. It is only a few decades in time, but if I can work faster, that's OK.

  Thus, we come to the question! After a successful installation of Windows XP Professional 32-bit, using the official, given restore disc with the laptop (it came with two operating systems of two bilingual English & Greek), I realized how fast he could be with Windows XP Professional 32-bit! I could ' t believe that...! Why I was using my laptop with Vista, all these years, I have no idea! The problem is with the memory, like that cannot recognize the 4 GB of RAM, even if they have installed SP3 and all updates provided Microsoft Windows. I'm sure that Windows XP Pro 32 bit can 'see' the 4 GB of RAM, as I had 4 GB of RAM with Windows XP on a desktop computer, I have no more.

  I also tried the/3 GB and the/PAE boot.ini spends some time, but nothing else. The problem is that I do not remember what I have on my desk, or how that has memory, but I don't know that I had 4 GB of RAM in the 'Properties' window I searched on the net also to find a solution, but I couldn't find the boot.ini file switches and parameters of the BIOS, which is not based in the settings of the BIOS of TOSHIBA laptops.

  Is a solution provided by some user/technician exprerienced, about this Windows bug?

  Thank you very much in advance for your kind cooperation.

  Angelos Pitsos

  I've never tried XP with up to 4 GB of RAM to be honest, anything over 2 GB should be more than enough.
  32-bit operating systems can only address a total of 4 GB of RAM, why you can't access all this RAM is because the address space is also used for the system resources such as network cards, scsi controllers and graphics cards etc.

  Richard S.

• Sizes of icons for Windows 7

  My application is running in Windows 7 Ultimate 64 bit and I use LabWindows/CVI 10.0.1. I created an icon file in the editor of icons included. I kept the size 32 x 32 and 16 x 16 default and added 48 x 48 and 256 x 256, all with 32-bit color versions. I put the settings of the target to use this new icon.

  When I look at the folder containing the executable file of my application in Windows Explorer and go through the different methods of the folder view, not all sizes of the icon. Picture 16 x 16 is used for views list and details, and I increase the size of icons versions of 32 x 32 and 48 x 48 seem to kick. Then, when the size of the icons gets in the Middle, I see LabWindows/CVI default icon (the one that looks like a window with the symbol "cvi" inside). As I do even bigger icons, possibly version 256 x 256 of my custom icon takes over.

  MSDN seems to say that these three dimensions are all necessary sizes for Windows 7. How can I replace the application icon "cvi" default for all sizes? Is it necessary to use a different icon editor to create a few different sizes of icon image?

  Thank you

  Brian

  What is probably happening is that your icon cache is corrupt. Searching online, I found different ways to solve this problem and none of them 'official' Microsoft, so I hesitate to recommend a way to rebuild your icon cache. However, I have to solve this was delete C:\Users\\AppData\Local\IconCache.db and restart my system. The IconCache.db was rebuilt and the correct icon shows for larger sizes rather than the default. It seems that the first icon, you display the size large/XLarge remains stuck in the IconCache. For example, I changed my icon before the consultation at a larger size (never seen the CVI icon) and the icon I used was the one stuck to the size large/XLarge. I don't think it will be a problem on a target system because you will not modify the icon we that you distribute the application.

  It's not not clear to me, if there is a problem with a Windows bug (I saw similar reports on various forums, but nothing official), with our editor icons, or how ICB home icons from executables. I filed bug 354481 to investigate this issue report.

• ProtectTools question: decryption of an encrypted HDD ProtectTools where windows does not start.

  Hello!

  I have a HARD drive that has been encrypted with the HP ProtectTools of Windows7 drive encryption.

  Computer is here 8460p.

  For 2 years, it starts well and gave me no problems until my windows did not start as expected.

  (The reason for windows won't start don't no is a mixture of live without local area coupled with windows bug regarding these services)

  In short: all the works of passwords and Windows 7 64 starts but me comes in some way in the newspaper of the sequence.

  Given that I can't start windows on the encrypted HARD disk I can't decipher the reader...

  As the drive is encrypted it can not be read from the outside

  Since the PtotectTools of HP, started from an external win WHAT HDD 7 cannot see that the drive is encrypted

  Since then, I'm totally stuck.

  It really sucks that even if I have all the passwords available, saved on USB keys and have them in mind, cannot reach the data.

  Is there a HP tool that can decrypt the drive when I have all the necessary keys?

  best regards / Fred

  My colleague found the right tools. Took me 2 hours to recover all the data!