Window XP setting after a while

Similar Questions

• Someone used this on me and after a while windows shell program take completely my computer as well as bank accounts

  I finally understand what has happened to all computers, I threw out and now it's a. Someone used this on me and after a while windows shell program take completely my computer as well as the account numbers of bank accounts and cards and so on. I got it with computers. I have been a dedicated customer of Microsoft and I can't believe that you would put on such a dangerous program that any computer fool can use to people disrupting. I want to know what I can wip this thing by buying a new hard drive and operating system put this program on this subject before I sitgn on the internet and don't have not this thing happen? I would like to send you the hard drive rinse you these people in the open air where I could get my hands on them. This coswt haqs me more than I want to tell you.

  I think that you're wrong in your assessment of what you have been.  "Shell Microsoft Program"?  Please explain.

  If configure you your own computer, software Windows XP firewall is enabled, have a decent router (reset and configured with a password before connecting anything to him) between your network and the Internet, and you have changed all your passwords for each account to a password that is hard (15 characters or more containing at least three of the four character types (: uppercase, lowercase, number, and symbol) and checked that each account online has a configuration password recovery method that * you * have you personally (no one else has used your password they obtained to make sure if you have already changed your password, they could get the upper hand) and you have a decent anti-virus software installed. Then you should be fine.

  You can Disable Remote Desktop (on Windows XP Professional - you left out the details of your operating system in your rant) and Remote Assistance if that makes you more comfortable or you do not use these functions.

  Otherwise - most of it security is common sense stuff.  Do not download or run things do not know the origin of and trust said origin and application.  Do not open unknown emails and instant messages.  If you do not call to get your computer fixed, don't expect sopmeone will call you to fix your computer problem - and if they don't - know it's a scam.  Don't visit questionable websites.  Do not use the computer on a daily basis with a user account that could ruin everything (run as a normal user, not an administrator for your daily activities.)  Keep your system and you have installed - including all antivirus software - up to date/current.  Keep your computer in a locked - room physical security is a top priority.  Backup your important data to external media.  Change your password periodically - because you have a password - most probably someone can get it.  If something is * really * important keep you the 'secret' and protected - encrypt.  Almost every other method can be easily bypassed - encryption, not so much.  Etc and so on...

• my windows xp desktop it stops automatically and after a while it turns on automatically I need

  My windows xp desktop it stops automatically and after a while it turns on automatically, I need, I don't have the card because I use it my children using it I'm not with them so I would appreciate if anyone with this problem

  Is this a real stop or it just goes to the sleep or Hibernate?  Are the power always turn the machine when she "quit"?  Could it be overheating?  Have you checked to see if the fans are all spinning?  What is a screen saver?  Have you checked for a spyware/adware/virus?

• How to turn off the display after a while without input

  Original title:

  Activate the screensaver mode full-screen.

  Hello

  Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?

  Hello

  Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.

  Please visit the following links and set the option to turn off the display according to your requirement.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power management

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Hope that the information provided is useful. Do not respond if you need more help.

• VCenter service is getting arrested after a while

  Hello

  We use Vcenter server 5.0. In recent days, we have observed that vcenter service will automatically stops after a while and cause the backup fails.

  We investigated the event viewer on this and found a sql transaction log event is full.

  Can someone help me get this resolved?

  Thanks in advance.

  Steps below should be useful for the resolution. Please check.

  1. Connect to the Microsoft SQL 2005/2008 Server as an administrator.
  2. Open SQL Management Studio.

     Note: If you are using MS SQL 2005,.
     check that you are using MS SQL Management Studio 2005. Alternatively, if you use MS
     SQL 2008, check that you are using MS SQL Management Studio 2008.

     Right click on the database using VirtualCenter.

  3. Click on Properties.
  4. Click the Options link.
  5. Set the recovery model simple as follows:
     Click OK.
  6. Once this operation is finished, right click on the database again.
  7. Click on tasks > shrink > files.
  8. In the Shrink Database window, select the file type as "Log".  The name of the file appears in the filename drop down as databasename_log as follows:
     Displays the workspace used compared to the allocated space. After you set
     the Simple, the majority of space recovery model in the
     released transactions.
  9. Make sure that the radio button to release unused space is selected.
  10. Click OK in this window to reduce the transaction log.

• Context menu (including all the other menus) does not work after a while.

  I use ubuntu 12.04 LTS, 33.0 firefox (thunderbird also same problem).

  Context menu and all menus are not works after a while (maybe 30 min)?

  I have to close all firefox windows to make the menus work (make an another new firefox windows does not solve problem)

  The problem this menu would not be displayed (menu popup and also normal menus) have not been reproduced approximately 2 days.

  I have not try your solution because I had planned to try your solution after I encounter the problem again.

  Only difference when I got problems with menu meets it is that I ran firefox from terminal invites no task bar of the unit...
  (I expect to capture some bad newspapers of the terminal prompt when I encounterd new menu problem)

  Maybe it takes other hours or days before I met the new problem or there is a possibility that I could not this problem again until I do some changes (restart firefox from unity...)

• Cannot load websites after a while

  Firefox cannot connect to Web sites after a while. It will keep on the connection but no results. Sometimes, the page will be able to load. Other times, I need to restart the browser.

  I tried the things:
  1. disable the plugins and modules.
  2. the other browser (Chrome) works very well.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

• Tecra M2: sound system stops working after a while

  Hello

  I used my TECRA M2 a year without serious problems. A moth started it my problems with audio - after the start (no matter if via boot or wake up from hibernation) his (speakers) system is functioning normally. After a while (several tens of minutes, hours) sound system stops working (no sound from your speakers or headphones). No errors appear, but not sound. When you try to adjust the volume via the Windows icon on the bar the task CPU usage becomes very high.

  I decided to reinstall my M2 - the first attempt was clean install of WinXP SP2 standard support - sound problem has not changed. Today I decided to restore the system recovery CD, but the result is the same :-(

  Any idea? -I suppose that problem Council... Now, I made a mistake when entering - beeps system (such a beep as during startup) - interesting :-/

  Except sound problem - another strange thing - when I send my XP to restart in about 10% of the attempts he goes off and does not start. Starts normally after pressing power button...

  Any ideas would be much appreciated
  TX

  Hello

  Looks like a hardware malfunction.
  Maybe it s caused by overheating.
  Check the cooling modules and try to clean it with the vacuum cleaner.

  If it doesn t help you should contact the Toshiba ASP.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• Acer w3-810: heating problem & touch stops working after a while.

  1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.

  to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.

  I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].

  What shoul I do, what I need to change the digitizer, software or any better solution?

  resolved:

  the problem was solved when I disconnected the cables of the digitizer and then reconnected.

• I get the message Windows is set up PSSWCORE

  Hi, when I start my computer it keeps coming up with the message Windows is set up PSSWCORE and then after a few minutes it says that the information is on a CD-ROM disc.  I tried to put in my Windows Vista disk to see if that would take care of the problem, but it's not... can you tell me what this means and what I need to do to fix this?

  Thanks :)

  JRondeau

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/OJP-7680-psswcore-MSI/m-p/42547

  Read thye over information about HP software.

  See you soon.

  Mick Murphy - Microsoft partner

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I update, it updates successfully, but after a while same updates appear.

  original title: Please help me

  I received the same update over and over again. When I update, it updates successfully, but after a while same updates appear. I use Vista Business 32-bit. Please help me.

  Hello

  You can right-click on any update and hide it in Control Panel - Windows Update.

  Then run this:

  How to reset the Windows Update components? (Has a Fixit.)
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 Pro 64 error Windows Update setting

  I spent some time reading in the community on Windows update setting. I have not yet fix all this trouble.

  My windows will not update at all, using windows updater, or antivirus software.

  I've upgraded Windows 7 64 for Windows 7 Pro 64 and seemed to have the question after the new installation. I was check in the region that allow Windows update to run, ongoing execution of bugs, etc. Finally, I got this error after you run the troubleshooter that I downloaded from Microsoft. Here is the error: 0x80072EFD (2016-09-14-T-02_00_29P)

  Can someone tell me what this means and how I can solve this problem. I think that it is possible that he won't let me update Windows security, etc. Thank you.

  Try the solution here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  If this does not help, come back to me and I'll tell you how to reset Windows Update.