Windowless non-plein projector screen?

Similar Questions

• my mouse can always move to a non-existent monitor screen area

  I have a LG external monitor connected via HDMI. When my external monitor is turned off, my mouse can always move to the non-existent monitor screen area. Is there a way to fix this? The mouse works off the screen, that it is difficult to use. Still using Yosemite.

  Unplug the cable from the screen at the end of the MAC.

• Portege R500 - toggle the display of the laptop to LCD projector screen

  Hello - new here, urgent request. We have a meeting, and I use the Portege R500 for the first time with LCD projector which is also a Toshiba.

  How do the laptop screen display the projection screen? I thought it was function F5 (Fn + F5), but it does not work.

  Can anyone help?

  Hello

  Yes, you must use the FN + F5 to switch to the external monitor or external projector, etc.
  You must first connect the laptop with a projector, while both devices are turned off.
  After connecting the projector you could power the laptop.

  Then try to switch to external projector using the FN + F5 key combination

• Projector screen recording

  I'm having the problem to see a small grid / this overlay in my editing, the result of the shooting of a projection screen. are there techniques of effects/editing that I can use to remove these lines and get a clearer picture? You can also see that the left side as well as the top and bottom of the screen is parallel to the border, but the right is not. Is there an alternative to the swivel / tilt typical of the "basic 3d" effect, where I can stretch each individual corner as the effect of the "perspective" in GIMP?

  

  Simple answer, do not use projection screen. Use 'card' instead - it's thin white cardboard, that children do their school presentations, costs about a dollar for a large sheet. Insert the camera right next to the projector, side by side. Lenses will be slightly to the other, then both are focusing on the same point a few feet more far away (your cardboard screen). Be sure to use the dull side of the Board, that the shiny side will give you hot spots. Cardboard must be perpendicular to the ground, so the beam of the projector, it hits all right to avoid the effect of trapezoid (image not square, warped).

  The image projected at a close distance cannot be less than a foot across, and that's fine! Simply zoom camcorder and mentor until nice and record, works very well. I'd hire manual focus, so it does not derive. You could play with shutter also to see what works best in reducing the flicker from old cameras 8 mm/Super 8 use odd frame rates. I do not have this process over the years, but I always direct connected camcorder video to a TV monitor output so that I could really check my results before committing - you don't want to do this several times, record once and. Use manual exposure so you can no longer, so he's not blowing your subjects.

  Well done, you should not have to make any angle pin type stuff to fix, it will be perfect as a shot, without black borders or distortion.

  Good luck

  Thank you

  Jeff

• How VMware Player reacts to projector screens?

  Hello

  I would like to start by saying that I am completely new to this "virtualization" agreement and am still quite confused. In addition, I was not sure what advice this issue was the better for, so mods please feel free to move it to the correct card.

  Within 24 hours, I will introduce a Web site to an audience of 50 to 100 people. The problem was, my site was coded on a linux machine and would have taken a huge amount of work to make it compatible with Windows . So, I decided to try this thing of VMware, as I've heard a lot. I advanced and downloaded the necessary files, started PuppyLinux (small, fast and efficient) and managed to get the LAMP server running.

  However, one thing I was concerned with is that I could not test if a projector would be properly view the Web site. I used the same projector that I will tomorrow use perfectly fine with Windows Vistabut it will properly project the screen/things that run to the INSIDE of VMware? I am very worried that it will be just a big black box and ruin the entire presentationruin countless hours of programming of the site work (it's a competition for an event). Event rules are very strict, and I don't think I'll be able to test the projector before the start of the presentation.

  Does anyone have ideas how a projector would answer to VMware? Everything will appear correctly - including everything that happens inside the VMware Player?

  Thank you!

  Hello

  Works very well. You will project your office as you normally would. You can project your entire desktop, rather than just the content of the virtual machine console.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Tecra A2: Nothing appears on the projector screen

  Model: Toshiba Tecra A2

  Problem: Laptop is wired to a projector using the VGA port on the back of the laptop.

  When we try to playing a DVD or mpg video on the laptop the video play as usual on the laptop, but nothing appears on the display of the projector. Windows Media Player is visible on the projector, but no video image.

  The laptop has a video on the port on the back of it, and I guess that's where the laptop sends the video - but we do not want to use this - is it possible to get the video playing on the vga port?

  Thank you

  Hello

  The first change to the projector by using the FN + F5 key combination. After that, start the DVD or any other video file. I had the same problem if the laptop is connected to the TV. If the DVD work that it was not possible to see on TV.

• Non-illustre welcome screen system will automatically connect as administrator

  Had to reinstall vista and now welcome screen does not appear with all system users automatically open an admin session.

  Hello

  Reverse this trend:

  How to automatically connect at startup in Vista
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Or

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Duplicate a window 7 display on a projector screen.

  Is it possible to have my Windows 7 pc in dual display mode only when a projector is on? I don't want to have to activate manually each time.

  Hi Brendan,

  Thanks for posting your query on the Microsoft Community.

  I suggest to try the steps in the Microsoft Help article below and check if that helps.

  https://support.Microsoft.com/en-us/KB/976064

  I would also like to inform you that if you unplug the projector, then the settings will automatically change and next time when you connect the projector, you will need to do it manually.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to create a non-blocking Popup screen?

  Hello

  Basically, I want to do something similar to the State. Show (String message, bitmap Bitmap, int, long, style, boolean allowDismiss, boolean, int priority block) API where I can display a modeless popup containing various fields and still allow the user to continue to work on the screen below the pop-up window.

  Thanks for any help and suggestions.

  It is not possible. you could draw directly on the screen, it would look like a popup, but would in fact part of the screen. We do overlays in this way, for example.

• Console remote vCenter - the server name cannot be resolved

  When I run the utility of Vcenter web-based console, a new web page opens and displays the console but I get the following error:

  "The server name could not be resolved."

  Here is a screenshot:

  

  Here is the URL of the remote console tries to display:

  :9943/vSphere-client/VMRC/VMRC.jsp?VM=urn:vmomi:VirtualMachine:VM-105:A5FB093-945A-4288-8DC1-4C64B0E4D4D9 https://172.16.1.1

  I am a student from progressing to a VTC VCP5 Certification community college.  We use the VMware Network Netlab Academy facility. I have no access to the client based on Windows Vcenter.  I have only the client on the Vcenter web access.

  Many many thanks Andre!  The work of Console launch.  After that I removed the entries in/etc/hosts localhost to the server vcenter-1, I brought successfully to the top of the console window.  Of course, I also had to add an entry for the host esxi-1 in each file/etc/hosts.

  

  The console works great.  I was able to connect and send commands of Linux; However...

  The only remaining question I have is that the console returns to Mode "full screen" by default and I can't seem to exit full screen mode.  It encloses the vclient overall utility.  Is it possible to tell the coming launch mode console non-plein default screen?  Y at - it a remote console setting that controls "Full Screen Mode".

  Scott...

• Black screen on Equium A100-306 after watching the movie on external projector

  Hello!

  I have a laptop Satellite A100-306 and it worked very well. Yesterday, I plugged in a spotlight and watched the movie.

  Once I finished the movie I have turn it off and disconnected from the projector.
  After a few hours later, I tried to change my cell phone and found that the initial screen of charges until after there is nothing on the screen.

  I was able to go into the BIOS but couldn't go safe mode. I remember I used the key Fn and F5, but nothing comes so any help would be much appreciated.

  While the initial charge up screen I do not think that there is a problem on the screen or the graphics card the toshiba logo at startup.

  Can anyone help to know if tht is a hard drive problem maybe.

  Hmm for me it seems that the display was set ONLY to an external display device (projector, screen, etc.) and, therefore, you are not capable of anything on the internal display of laptops.

  I think you need to connect an external monitor or projector to this laptop second and must try to set display settings default (Mobile only)

  The FN + F5 combination should help you.
  As far as I know the laptop replaces the output of the screen in the following order:

  * Internal display * * (CRT) screen external + internal screen * * (CRT) external display only * TV (s-video output) + internal screen * TV only (output s-video) *.

  So maybe you have chosen the last device (output only s-video)

• Satellite L300-135 - unable to look at the projector or LCD TV screen

  Hello

  For months, I was able to view my laptop on lcd tv and my projector screen. I would just plug my cable rgb at the back of the TV or projector and the screen would be immediately shown. Now am unable view the screen of the laptop on each device. I try to toggle Fn + F5 button but this has no effect. I don't have to press Fn + F5 because it displays automatically once the rgb cable has been connected.

  I have intel chipset r965 and have just recently updated the driver from the website of intel but this has not solved the problem. Would appreciate further advice outside the toggling the Fn + F5 key

  Thank you very much.

  > updated the driver from the Intel site
  I'm afraid that's the problem. Toshiba's own drivers tailored for each model laptop with the support of all the features and additional options.

  I'm afraid with this Intel driver it will not work. Back to Toshiba driver.

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• mode full screen makes the small buttons

  Hello, I use firefox 14.0.1 on my windows 7 Tablet I like full screen mode because it gives my small screen more space however, it is the small buttons(minimize,maximize,close) legend wanted to know if I could do the caption buttons remain the same size as in mode non-plein screen

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #window-controls .toolbarbutton-icon { width:25px; height:25px; }
  

• Video full screen gives a blank white screen.

  Original title: Video full screen mode issues.

  I have a Dell desk top that is running Windows XP Home Edition. Every time I watch a TV show or a movie online and try to open it using the full screen, I always get audio, but you will get a blank white screen.  I can display mode small screen, but the mode full screen does not seem to work.  Any ideas on how to solve this problem?  Thank you.

  Thanks, but I already fixed it.  The browser is Internet Explorer 8.  No I did not any Chang recently except to IE 8.

  I was using Flash Player to view the website of lifetime television show.  I started to play the show, and while he was in NON-plein screen mode, I click with the button right on the screen, and click on properties, then I unchecked the box that appeared (there was only one box, and I don't remember what she said next to the box).

  I clicked on close or OK and then clicked on icon mode full screen, and it worked.

  Thanks for your help, if.