Windows 2000 Setup Copyright issues

Similar Questions

• Windows 2000 Setup error

  Hi, I have a Toshiba Tecra 730cdt I'm trying to install windows 2000. When I get to a point in the proses

  It stops and gives me the following error message:

  Fatal error:

  Setup could not retrieve the ID of the product due to the following error:

  RegQueryValueEx returned for invalid data [type = 1], or the nest has an invalid length [length = 8].

  ***

  Fatal error:

  Setup could not retrieve the Identification of the system product that you are installing

  Support for windows 2000 may be damaged

  Please contacct Product Support

  ***

  Once the system is rebooted, it shows a screen saying that the installation has been restarted and enters this loop hole

  I was wondering how to fix this error because I used a different windows 2000 disk and got THE SAME ERROR

  ANY help would be appreciated!

  How to modify the Config.sys and Autoexec.bat files

  http://support.Microsoft.com/kb/232558/en-us

• F8 does not Windows 2000 Setup

  Hello, just like the title reads above the key F8 does not work during the installation of windows 2000 on my vm. When he asks the user to press F8 to accept the license terms, nothing happens.

  

  You must click the mouse in the Virtual Machine display so that it accepts entries to the keyboard.

  On some laptops, if you are on a laptop computer, may also require one to press the fn key and the key F8 .

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

  Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

  I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

  Did you download and install the special version of CS2?  It's the only one, you will be able to use.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Display satellite P30 with Windows 2000 issues

  I can't find a driver for Satellite P30 I'm running on Windows 2000. Windows 2000 is the only operating system, I am able to turn it on now. If someone was able to get a P30 works with Windows 2000? Help, please.

  Hello

  This laptop model has been tested only with the Windows XP operating system and it is not supported with Windows 2000. Sorry, but you won't find any display driver for this device on the Toshiba site. The only way is to try to find a driver on the site of the producer graphic CAD.

  I'm not sure but I think that your unit has "ATI MOBILITY RADEON 9700" graphics card.

• Cannot install Windows 2000 on SatPro 4600

  Hello

  I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

  Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

  The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
  "Setup cannot copy the file"File_name"

  And will not let me continue with the Setup program.

  Help, please.

  Hello

  I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

  Good luck!

• Portege 3440 - cannot install Windows 2000

  Hello friends :)

  I have a problem with the installation of Windows 2000 on Portege 3440.
  I was running Windows 2000 with the FDD USBB (with driver for PCMCIA of CD-ROM) installation and CD-ROM PCMCIA. "Everything was ok at the moment when I came for winnt ' q.

  When installing without partition on the HARD drive was appeared on blue background information: "could not find a place for a swap file. With partition (FAT32, 6 GB): "Setup could not install the Windows boot loader. To ensure that your C: drive is formatted and that the drive is not damaged. I tried with three other HDDss.
  What should I do to install this system? (Same users do not have these releases)

  Thanks for help
  Adrian

  Hello

  1 don't forget to prepare your hard disk with fdisk (a bootable partition) and format it with the Fat32 file system

  2. start by a MSDos saved in your floppy drive-drive with drivers for your PCMCIA CDrom drive (Freecom)

  3. copy the entire i386 to the W2K installation CD directory your HD, be sure to have loaded smartdrive, otherwise it will take ages!

  4 start again with the saved, go to the i386 directory and start Windows NT

  You can look here for more information about freecom pilots and the bootdisks: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
  On your 3440 it should be easier than with the R100 because of normal 2.5 "HD 6 GB, but the problem is basically the same

• Update my Tecra 8000 from NT 4.0 to Windows 2000

  When I update me my Tecra 8000 NT 4.0 to Windows 2000, my Setup stopped and I got the message that I had to remove the Configuration Interface for system Toshiba driver. What is going on?

  To enable NetMeeting in Windows XP, you must go to the start menu and select run. Conf and click OK. After the NetMeeting configuration wizard starts, click Next. Enter your personal data and click Next. Select Directory list options, and then click Next. Select the media for your connection and click Next. Set up shortcuts for your convenience options, and then click Next. Click next to configure the volume options and click Next and then click Finish. To start NetMeeting, NetMeeting Startup session (e.g., run conf.exe again to start the application or select the shortcut in the start menu or desktop), click the phone button and enter the IP address of the machine you want to connect with.

• Tecra M2V crashes during the Windows 2000 format

  I'm working on the installation of Windows 2000 for a laptop Tecra M2V in my school. The installation process crashes when the disk has reached 6% format. It is always in the same place that the deadlock occurs. Is there a way to get around this, or can I change a setting in the bios Setup? Any help appreciated.

  Hello

  Not easy to say what can be the problem, but if the formatting process always freezes at the same place I assume that there is a problem with the HARD drive sector faulty or bad. I recommend you to check the HARD drive using a tool. Google a bit and you will find many tools for free.

  Good bye

• Re: IMPORTANT - how to install Windows 2000 on a Satellite L300 - 16 M (PSLB0E)?

  Hello

  I am an independent developer and absolutely need to install multiple operating systems on my * Satellite L300 - 16 M (PSLB0E) *: it is very important for me because I need to check the functioning of the software under each environment for real (not not using solutions like VMware, for example).

  Well, then, right now, I did a backup Acronis image of original full HDD, and then deleted the original scores of WinRE and data, reduced and moved from disk to the partition of Vista... and installed System Commander 8 to prepare my future multi - initialize. For the moment, everything sounds right: Vista works perfectly!

  Also note, I have configured the SATA in the BIOS Setup in "Compatibility" mode just because I don't need AHCI in my type of use!

  Second step: now, * I have to install Windows 2000 Pro (SP4) EN *. Of course, I am aware that the sticking point is the SATA/AHCI driver, which is not present in the CD of Win 2 K... So, I just make a new CD integrating these drivers using nLite; now, I tried using the driver Intel site on Intel 82801 HEM / HBM SATA AHCI controller (ICH8M) and page drivers Toshiba XP.

  But it does not completely: the Win 2 K install begins... All the drivers are well charged (including the ones AHCI) and just after this stage of loading, I get a black screen with just a blink of an eye cursor at the top left of the screen... indefinitively :-(

  I tried also to SATA mode "AHCI" in the BIOS and it's the same thing.

  So, what to do next?

  I used the wrong AHCI drivers? Do I need to integrate as many drivers Toshiba (about chipset, display, sound) in the installation of Windows 2000 using nLite CD? I mean the capacity of the CD is not reached.

  Is there a way or a tutorial to install Windows 2000 somewhere? For XP, I think it will be easier because SP3 seems to support AHCI, but earlier, my problem is to install Windows 2000: Although Microsoft wants to leave-it, there are many professionals who still use-it... And my work as a developer, is to make my software also works on this OS! * I really need to find a way to install it on this computer! *

  Awaiting your response informed and all the tips or idea that could help me to complete the task.
  In a word: HELP! Oops!

  Post edited by: eanon

  > No I used the wrong AHCI drivers?
  Perhaps.

  As far as I know that you need the crib Intel Matrix Storage and in this package, you will find the SATA drivers.
  http://www.Intel.com/support/chipsets/IMSM/index.htm

  There you have to choose to get the latest driver - version PV-> Win 2000 8.5-> there you must take the package from point 3

  Good luck

• Problem with Variables shared in exe running on Windows 2000

  Anyone know if there are problems with the Variables shared on Windows 2000? I can't get the LabVIEW executables that use shared Variables to work Windows 2000 on a computer with just the runtime engine.  Everything works perfectly on XP on a machine with just the LabVIEW runtime engine installed (using LV 8.5).  Shared variables are supposed to work less than 2000.  I have attached the sample code that is based on one of the examples NOR to the Variables Shared - editor and the Subscriber - with some extra stuff for the diagnosis, I added.  On Windows 2000, you can only run one or the other exe.  It seems that as soon as the other come to the part on the diagram with the shared variable node it crashes.  Shared variables are getting written in the because if you close the editor and then run the exe subscriber it reads the latest values set properly.

  On Windows 2000 I tried with the administrator account and off the ladies of viruses, firewalls.  There may be another Windows 2000 setting that causes this problem with the two exes trying to access shared variables.  I do not have the development environment on Windows 2000 computer that the purpose of this exercise is to see if its worth using shared variables.  Windows 2000 computers remain the same in the Test and measurement world.  A research on Developer Zone does not there is no particular problem with Windows 2000.

  Any suggestion is appreciated.

  Hi André,.

  Thanks for the comments!  Your feedback will help us improve LabVIEW for our customers.  This bug has been reported to R & D (#45493), and they're currently investigating this issue.  For now, the best solution seems to be using a different operating system, as this seems to occur only in Windows 2000.  Thanks for the comments!

• Windows 2000 Professional and X 61, X61s

  Hello

  • Anyone know if we can install and use windows 2000 Professional on a X 61/X61s (stata questions?)? Is - this dangerous (drivers, potential property damage)?
  • Some drivers are available for windows 2000 Professional. It's loaded with windows 2000 pro recovery disks in?
  • It will improve the battery life?

  Thank you.

  Hi, I had installed on my x 61 for about a year with zero problems of win2k. the reason why I went finally xp was due to new standards unavaiable on 2 k (wga, video hi-def, sdhc, etc.)

  Oh, one thing that does not work: on the card reader sdhc cards. This isn't really a big problem because lack of wga could be...

  for the sata issue I can think of two options: integrate or start in compatibility mode, install the drivers and drivers switch to sata.

  Good luck

• I'm looking for comments about the advantages and disadvantages of vs Windows 2000 Windows Server 2008.

  Hello

  My company uses Windows 2000 Server for a job very very important. I want to convince them to upgrade the server to Windows Server 2008 operating system and they asked me to give them some reasons, so I want to know Windows 2000 Security and performance issues and the benefits of Windows 2008 in detail to carry out the task. Please tell me where I can find this information. ? Thank you
  original title: Windows 2000 VS Windows 2008

  Please repost your request in one of the s in Forum Windows Serverappropriate, thank you!

• (Windows 2000) Error #0x80072EFE when you try to run Windows/Microsoft Update

  Hello world. I hope you don't mind offering support for a Windows 2000 based platform here, (I don't think Windows Update deferred much, if at all between the two operating systems)

  In any case, all of a sudden, I get error 0x80072EFE in Windows Update all of a sudden. I tried several troubleshooting steps, delete the folder C:\Windows\SoftwareDistribution to just reboot my computer. Nothing seems to work, and I hope someone has a step that will be.

  The last few lines (which seem to be relevant to the question at issue) are as follows:

  15:50:21:700 2 508 3e4 PT +++ PT: synchronization of updates of the server +++ 2011-01-22 15:50:21:700 508 3e4 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = 15:50:21:888 https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-01-22 508 3e4 Misc WARNING: send failed with hr = 80072efe. 2011-01-22 15:50:21:888 508 3e4 Misc WARNING: SendRequest failed with hr = 80072efe. Used proxy list: <(null)>list used workaround: <(null)>Auth schemes used: <> 2011-01-22 508 3e4 PT 15:50:21:888 + last proxy request failed with hr = 0x80072EFE, = 0 15:50:21:888 2011-01-22 508 HTTP status code 3e4 PT appellant provided credentials = 15:50:21:888 No. 2011-01-22 508 3e4 PT + Impersonate flags plus 0 3e4 508 15:50:21:888 2011-01-22 PT + Possible authorisation schemes used = 2011-01-22 15:50:21:888 508 3e4 PT WARNING : Methods failed, error is 0x80072EFE, SOAP client error = 5, error = 0 soap code of HTTP status code = 200 15:50:21:888 2011-01-22 508 3e4 PT WARNING: PTError: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: GetConfig_WithRecovery failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshConfig failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshPTState failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING : synchronization of updates: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: SyncServerUpdatesInternal failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: could not synchronize, error = 0x80072EFE 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: exit code = 0x80072EFE

  If anyone can help, that would be great.

  See...

  Microsoft Update Catalog
  http://catalog.update.Microsoft.com/v7/site/home.aspx