Windows 2003 Clustering on VMWare ESX 3.5

Similar Questions

• It is possible to assign a GPU to Windows VM running on VMWare ESX?

  Hello

  I intend to build a home with several VMS server and are given the option of ESX, if I know that the GPU inside my server can be specifically assigned to the VM Windows 7 that I should start at the top on the esx?

  Thank you

  aBBy007

  Don't know if you took the glance on this link below

  Documentation Centre of vSphere 5.5

  Thank you

• Clustering with VMware ESXi 4

  Hello

  Please can anyone provide me with step by step instructions on how to create a Quorum for use with Windows 2003 clustering on VMware ESXi 4.

  I need to know what I am doing on the server and how I then associate creating newly Quorum with the nodes.

  Thank you

  Andy

  Andy,

  You are welcome.

  Don't forget to set the thread to answer and consider to mark correct or helpful answers.

  André

• Can I run a Windows 2003 on VMWare Server with a date system different from that of my current operating system?

  Hi guys,.

  I would like to know if I can install Windows 2003 server using VMWare and run it with a date different system than my current operating system? Is this possible? A quick response would be appreciated.

  Kind regards

  Akshay

  So I guess you are trying to run a virtual of Windows machine running at a date other than the ESX host and the rest of your network. Am I wrong?

  In this case:

  -Do not use VMware time. If you have installed VMware tools open properties of VMware tools on the Options, tab uncheck the option of time synchronization

  -From the services control panel access services 'Windows Time' and set it to disabled and do not forget to stop the service. The service name is W32Time, but its full name is 'Windows Time'

  Arnim - van Lieshout

  -

• From ESX 3.5 to Windows 2003 VM Workstation 10

  I copied a windows 2003 vm from esx 3.5 and want to run under 10 workstation.

  The problems seem to be: 1. He starts but not the mouse, etc. 2. try to restart and it will not stop. 3. try to upgrade of the tools, and it does not restart. 4 get error on buslogic scsi problem

  5. If the power off, then NTLDR is missing when restart it.

  Would appreciate some advice on how best to move the windows 2003 VM from ESX 3.5 to 10 Workstation

  Regards, Mark

  Hello and welcome to the communities.

  How did you move it, or what was the process? You might want to try VMware Converter, if you do not.

• ESX 3.5 U5 - time to a Windows 2003 Ent server synchronization

  OK, I need an 'Idiots guide' how to set up my ESX 3.5 U5 to a Windows Server 2003 server. I prefer to sync with one of the DC. either the PDC or a BDC, either is fine.

  However, if it's too much of a headache, I would just sync "Windows 2003 member server".

  Thank you

  something like that?

  http://KB.VMware.com/kb/1318

  or do this?

  http://KB.VMware.com/kb/1003736

• HP EVA4400 + ESX 3.5.0 + discs Windows 2003 Raw Device Mapping

  Hi all

  I'm testing a configuration to help:

  • HP EVA 4400

  • ESX 3.5

  • Blade HP c-class

  Verification of compatibility EVA4400 on-site HP Spock, I found this note in the section Notes General Guest OS (1): "(7) Raw Device Mapping is not supported on Windows 2003 Guest Operating System load."

  I would use snapshot EVA (BC) to a Windows 2003 Server (not R2) for backup.

  In the VMware HCL, I have not found confirmation of this note.

  1. does anyone know if the note concerned only W2K3 or same W2K3 R2?

  2. "is there anybody out there" who uses this configuration? EVA4400 is: + W2K3 in ESX 3.5 + RDM + instant. Any problem?

  Thank you very much

  Max

  The restriction was lifted (don't know why he never existed - perhaps no trial):

  Release notes for HP StorageWorks 4400 Enterprise Virtual Array (XCS 09006000)

  Reference number: 5697-7997, second edition: January 2009

  * Configuration of VMware for the raw device mapping details

  RAW Device Mapping only is not supported with Windows 2003 Machine virtual guest operating system and versions prior to version ESX 3.5.0.

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• The VMWare Tools on Windows 2003 Svr Setup error

  Hello

  I'm using VMWare Workstation 9.0.1 build-894247 under Win 7 x 64 and and try to install VMWare tools on a WIndows 2003 Svr Standard guest but keep getting the error "Error 1335 the cabinet file 'Toolbox.cab' required for this installation is damaged and cannot be used...". "The installation of Win 2003 SP2 and all updates from MS, I got this error several times.

  A screenshot is attached.

  Any suggestions?

  I have no problem with installation/update of the VMWare tools for other Windows guests that I recently installed.

  Thank you

  John Davis

  Verify that the checksum MD5 or SHA1 of the file windows.iso in the working directory of VMware Workstation is as indicated below.

  For version windows.iso of VMware Tools file 9.2.2.894247:

  MD5 = 8d9a47fddf3988bb1fcb62bb21d3fa8f
  SHA1 = 6a55b0d276a3442589d6a4892fa8759e8ca42712
  

  These values have been generated, based on the extracted windows.iso file of Tools-windows - 9.2.2.exe.tar should be the same one included in the WS 9.0.1 installed.  Note: The checksum SHA256 for the file windows-tools - 9.2.2.exe.tar has been verified against its value published prior to extraction.

• VMware ESX 4.0.0 in connection mit Windows Server 2008R2 Datacenter (4cpu) - license

  Hallo zusammen!

  I have several questions zu obigem Sachverhalt und hope, dass mir von Euch helped werden kann.

  Wir haben einen host ESX (VMware ESX 4.0.0) den wir via vSphere von einem Windows Server aus, verwalten. Auf dem ESX host wollen wir nun start, die first VM (ins Leben zu find) zu installieren. ES sollen OS installed werden (. ser on W2K3 / W2K8 STD (R2), company / business,...).

  Wir haben also license so: 'Windows Datacenter 2008 R2 64 bit 4 CPU. After we die erste VM installed haben, wanted sharp wir mit dem Lizenzkey der Datacenter license aktivieren. Unfortunately works weder der 'Product Key', noch der 'Virtual Key'.

  WO ist mein Denkfehler? Wie die of ich lizenzsiere auf einem host ESX VM procedures meiner Datacenter license Windows-VM?

  Email ich einen KMS Server?

  Bitte um Hilfe - Danke und Grüße TIM

  Auf einem Windows-Server further

  Ich habe einen Server Hello understand before mit 4-Prozessoren (mit neuankömmlinge bis zu 6 carrots?) und eine MS Datacenter 2008R2 as 4 processors so.

  Wenn nun auf dem vShere Installierst werden die Datacenterlizenzen dem host "OS are" Host the kannst und so many different Windows Server verschiedener color installieren, wie die Maschine these.

  (Die dabei "freiwerdenden licenses können as physical system recycled werden...)

  Die Lizensierung participations eher als "Zuweisung" - stell dir vor, die of the DC licenses klebst an den Server und damit Maschine lizensiert ist die mit data center.

  The Add Installation Aktivierung paper - die Zuweisung hands oder keine.

  Bei einer Aktivierung eines W2K8 STD. servers add to the (ublicherweise) einen VLC (VolumeLizenzKey) der eine unlimitierte Aktivierung allows.

  Wenn nun keinen VLC As, so wende Dich an den suppliers der DatacenterLizenz oder direkt from MS. Mit den entsprechenden Lizenzpaieren und Kaufbelegen solltest VLC key bekommen die.

  VIELLEICHT kannst noch something konkreter werden, um welche Art DC license are all und wie bisher deine Server aktiviert Hat sich (OEM, VLC, detail mit Select vertrag, SystemBuilder...) - eine Systembuilderlizenz ACE falls.

  BTW. a hindert dich daran, every Server STD als eines virtual system einen Datacenter zu installieren? OB deine nun auch STD oder doch keine Rolle spielt so DC application.

  Wenn einen planned Server ACE, den draufklonst oder geckoos193, der dann neu aktiviert werden will ists auch kein problem.

  Einfach aktivieren und ggf. uber die Aktivierung go book.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Also on 11-08-2011.

  http://www.Microsoft.com/windowsserver2008/en/us/downgrade-TC.aspx

  Post edited by: newmy

• ESX 2.5.5 does support Windows 2003? -Online new vs Compatibility Guide OS compatibility guide

  ESX 2.5.5 does support Windows 2003? -Online new vs Compatibility Guide OS compatibility guide

  I'm pushing on with W2K3 on ESX 2.5.5. I think it's OK and believe that I've done it before.

  "The Guide of the obsolete OS indicates W2K3 on ESX 2.0 and the online Compatibility Guide only covers ESX 3.0 and refers to discouraged on the tab"other"documents".

  Can someone clarify and verify that W2K3 will work on ESX 2.5.5?

  Thank you, all points will be awarded.

  W2K3 works and is supported on ESX 2.5 - I doneit frequently.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMware Converter error - error Windows 2003 Sp2 to 95%

  I am new to the world of the virtual machine and converted several machines without problem, but I have this error Windows 2003 Sp2 and it is very furstrating.  I use VMware vCenter Converter Standalone 4.0.1 on the computer itself on a local drive and from another machine on a network share.  Looking through the log, I found the following: "taskSpec, task taken 357 an exception in the meantime on the agent task ends." Collecting newspapers to the officer before reproducing the exception more. "Exception message: converter.agent.internal.fault.PlatformError ', but don't see anything else of interest.  I could really use some help with this one.

  Then, I would try with Converter 3.0.3

  can you put the source machine boot.ini file?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• VMware Workstation 7 not able to install in Windows 2003 Service Pack 2

  Hello gurus,

  Could you please help me how to install vmware Workstation 7 Server in Windows 2003 Service pack 2.

  Set up the file does not start... It's window closes immediately.

  Thanks for your help

  Kind regards

  DK

  work here on 2 k 3 - sp2 - read http://sanbarrow.com/workstation-faq.html#setup

  Perhaps one of the tips to help

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• How do I change the logic LSI Logic SCSI's BUS controller in a prompt Windows 2003 running on ESX 3.5 U4

  I'm unable to find clear instructions on how to change the logic LSI Logic SCSI's BUS controller in a Windows 2003 running on ESX 3.5 U4 prompt.

  If someone could help me I really appreciate.

  Thank you

  Cannot not just off VM, go to the settings on the Hardware tab, Type of SCSI controller, click on modify the type and change of LSI Logic.

• installation of windows, windows 2003 in vmware on xp host workstation

  Hello evrybdy,.

  I want to install windows 2003 as a virtual machine on my xp (on desktop) host

  so please tell me

  1. the latest version of vmware workstation, how to get free or evealvation version

  2. how to install it on xp host

  3. installation of windows 2003 as a virtual machine in vmware workstation

  The last Workstation Version is 6.5, but you can't get it for free. Another possibility, use VMware Server - it's free. Simply register to get a license key and download and install from the configuration file.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.