Windows 2008 R2 DataCenter model

Similar Questions

• How to enable the Windows 2008 R2 guest operating systems on Windows 2008 R2 Datacenter edition host

  Sorry, I realize it is there much written and blogged about activation and license but I still cannot grasp exactly what to do, please can you help me.

  I have a host running windows 2008 R2, datacenter edition.  The 2008 datacenter edition license allows any number of windows OS to run on this host (will run for most 2008R3 standard edition) so I guess (I hope correctly) that I don't need to buy more licenses.

  So my question is, when these comments of the virtual machines are created, how can I activate them?  What product key should be used?   I have a product key for data center edition, but it does not work "the product key you entered will not work with this edition of windows server 2008 R2.

  Thank you if you can let me know if there is a way (or ways) for the operating systems Windows Server activated running on datacenter edition.

  Best regards

  Jules

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows 2008 R2 DataCenter registry problem

  Hi all:

  A few months ago, I needed to make a full upward from my server and after that almost all still works fine besides that some functions including IE.

  The question I had is with 298 ordinal which is not found in the library iertudil.dll dynamics.

  I can confirm that the iertudil.dll file exists under System32 and tried to replace it with the original installation of the DVD where it was damaged but not yet lucky. I know that I have no malware or viruses that I ran full scans and this issue has happened after the back upward.

  So at this point, I'm sure that the problem is related with the registry key bad that was left when I did the back upward by up to 100%. I would like to make a correction of the registry software and I actually found a good which is accredited by Microsoft, but the problem is I managed to install the correction of the registry software, but if I try to run it, it won't work and it appears that the message '298 ordinal. "that cannot be found in the dynamic link library iertudil.dll

  I'm a bit on a dead end here because I can't run the program to try to repair the registry and looks like the only option is to go into the registry and try to fix it manually. Only problem is that I don't know where to find them and what would be the key to get rid of all bad registry entries.

  Given that I'm avoiding at all costs a repair of windows or pure full install as that would make me a lot of time down on my server, I want to ask if there is no genius out there who could point me where to find this iertudil on the register and the values should be there so I can modify it. Of course, I'll do a registry backup before committing any changes. If anyone can help, I'd appreciate that after googling for hours I can't find all the instructions for a manual registry fix. I'm on a Windows 2008 R2 DataCenter X 64 bit system

  Thanks in advance.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need help - connection problem with R12.1.1 (Vision) on Windows 2008 R2 (Datacenter)

  Hello
  
  (1) we made a fresh install of R12.1.1 (Vision) on Windows Server 2008 R2 for demonstration purposes at the senior management and upgrade planning. Running on 11.5.10.2.
  (2) installation went fine. We follow all the necessary prerequisites for installation.
  (3) after the installation, we did run autoconfig for DB as well as the APPlication and started services.
  (4) we are able to see the page of connection, but not able to connect using generic accounts of OPERATIONS/WELCOME or SYSADMIN/SYSADMIN.
  (5) send the document screenshot and a newspaper for your perusal. Please provide your e-mail id. Not able to attach here.
  
  Please help us with diagnosis and solution.
  
  Thank you and best regards,
  Renaud.
  
  Published by: 988810 on February 18, 2013 18:23

  Please change the password for these users by using FNDCPASS and then - check loss of password SYSADMIN. How to know the password of the user SYSADMIN [ID 1066661.1]

  Thank you
  Hussein

• Models of Windows 2008

  It has been a while, but I thought that when I was working for vSphere 4.1 a Windows 2008 with no model making of sysprep.   Seems I remember that there is no need to copy the Sysprep files into the sysprep vCenter folder.   It tells me that Windows 2008 needs to have the sysprep files copied to the sysprep folder in vCenter.  Is this correct?

  That's right-

• Windows 2008 R2 deployment from template

  When I deploy Windows 2008 R2 of model of what I need to run the customization or since windows 2008 sysprep a file it will generate the new sid on the bottom? or what I have to go to the system32\sysprep directory and run sysprep once deployed?

  You need not run Sysprep. Windows 2008 sysprep, it will generate a new SID.

• 64-bit Intel processors and Windows 2008, Datacenter Edition - Download naming confusion. That what I want?

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  Hé BSAFH

  Here is the vista forums

  Try the help below links

  http://www.Microsoft.com/windowsserver2008/en/us/2008-DC.aspx

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Windows 2008 R2 NIC disconnected when converting from a model and started using workflow start-vm in VCO

  Hello

  Have a very strange problem. I wanted to apply patches using a VCO on my model R2 2012 Windows workflow and Windows 2008 R2 models. My model of Windows 2008 R2 when converted and started by the workflow VCO does NOT get an ip address. Yet, when I manually turn on the model of Windows 2008 R2 after be converted manually, it gets an ip address immediately. So weird.  There is no problem with 2012 Windows, it works very well. NOTE: The workflow that starts the virtual machine only turns on (and is built in the workflow built by vmware) Finally, today I built a new model and has the same problem. NIC is VMXNET3 and problem seems of course specific OS, has anyone seen this before?

  Thank you

  I found this article and fix it. It resembles a known issue with VSphere 5.1

  VMware KB: Registration or the deployment of a VM template fails

• Windows 2008 model

  I need set the default user for each user, I get the same profile in the windows 2008 r2 in EXSi 5.1 model.

  I found how to, where he is said to use utility Sysprep before converting machine 'model' but I thought it was "deploy the vm model" function to use sysprep.

  C:\windows\system32\sysprep\sysprep.exe  /generalize /unattend:unattend.xm

  OK, let me rephrase it:

  Sysprep is useful before conversion to the model because it allows for the virtual machine in a "clean" State This means that even if it should go through sysprep again, using a Customization Wizard (in the menu where you set your IP, etc.) / customization specification, (screenshot here: http://www.alexwho.com/.a/6a0133f4036f7f970b019b00093755970b-pi) but you can also choose to simply "redeploy" the model just with plain 'don't customize' option in the deployment model.

  In short, sysprepping any virtual machine for the use of the model is advised that cleans the system for its subsequent cloning - it gets rid of superfluous objects.

• License with Windows 2008, Datacenter Edition

  We have two servers, each with a single processor, 6 and 6-8 windows server VM.

  Is it OK to take two license Windows 2008 Datacenter?
  I heard that a minimum number of CPU host must be two. Is this good?

  Thank you

  Yes, Windows Server 2008 R2 Datacenter Edition requires a minimum of two processors.  See below for pricing and licensing Guide:

  Windows Server 2008 R2 Datacenter is sold in a processor / Windows Server 2008 R2 Datacenter Edition Cal can only be run on servers with a minimum of two processors and requires a minimum purchase of two processors.

  http://www.Microsoft.com/en-us/server-cloud/Windows-Server/2008-R2-buy.aspx

  Matt

  http://www.thelowercasew.com

• model of vSphere with windows 2008 R2 deployment

  Hi guys.

  I'm going around in circles at the moment.

  I will deploy windows 2008 R264-bitStandard. I have bought the relevant VL MAK and won't use KMS.

  So the questions I have are:

  When you create a model I should activate the model and deploy?

  As far as I know, this would lead to kick in the activation process.

  Should I deploy and activate?

  I was wondering if someone has managed to create a customization script to prevent the reactivation or automate?

  Thank you

  Dougie

  We do activation at the end for each computer virtual created from the template. keeps things simple for now.

• Deploy Windows 2008 Server X 64 reviews of model with customization on Virtual Center 4.0 using the ESX 3.5 hosts

  Deployment of Windows 2008 Server X 64 system of operating invited by using hosts Virtual Center 4.0 and ESX 3.5 implements a message telling me:

  Cannot deploy the model: customization of the

  guest operating system "winVistaGuest" is not

  supported in this configuration. Microsoft Vista

  (TM) and Linux with Logical Volume guests

  Manager are supported only for the recent ESX host

  and versions of VMware Tools. Refer to vCenter

  documentation for taken configurations supported.

  error

  This isn't just normal? Just today I upgraded to VC4.0 to be able to deploy my new servers based on findings on this forum. And no matter if I change the Machintype Vista x 64 or elsewhere Vista32 (what is wrong of course). Any other gopt experience with this?

  There should be no need to upgrade to vCenter4 just to be able to customize a W2K8 Guest.  We vCenter 2.5 and have no problem.

  Take a look at this KB

  http://KB.VMware.com/kb/1010449

• You can configure Internet wireless on windows server 2008 R2 datacenter?

  Is it possible to set up a wifi connection to Internet in Winsows Server 2008 R2 Datacenter, or do you need to connect to the Internet via an Ethernet cable?

  Hi Kim,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• NUMA Licenciamento Windows 2008 VM a correr em cima vSphere

  Good afternoon,

  Alguem pode explain como o licenciamento Windows 2008 quando corre em cima of vmware works, e posso find essa Informação wave?

  Desde ja o meu obrigado.

  OLA' afragoso,.

  Pode obter como licenciar Windows e information other management MS amendments seguintes links:

  1) http://download.microsoft.com/download/9/E/4/9E4CCEC9-222B-4563-8DCD-43F941ABA73F/Licensing_Microsoft_Server_Products_Virtual_Environments.docx

  (...) This white paper is intended to give an overview of the models of Microsoft licenses for the operating system and server applications under virtual environments (...) or the third-party virtualization solutions provided by VMWare (...)

  Windows Server 2008 R2 Standard (...)

  Each software license allows you to run only one instance of the server software at a given time, in an environment on a single server. If the instance you are running in a virtual environment, you can also run an instance in the physical ENVIRONMENT only to run software of hardware virtualization, provide hardware virtualization services, or run software of management and service of the operating systems on the licensed server. We call this in shorthand 1 + 1.

  
  

  Windows Server 2008 R2 Enterprise (...)

  Each software license lets you run, anytime, four instances of the server software in four operating systems on a single server. If all four instances that you run are in operating systems virtual, you can also run an instance in the physical ENVIRONMENT only to run software of hardware virtualization, provide hardware virtualization services, or run software of management and service of the operating systems on the licensed server. We call this in shorthand 1 + 4.

  
  

  Windows Server 2008 R2 Datacenter (...)

  Once the number of licenses equal the number of physical processors on a server is acquired and assigned, you can run on this server: a single instance of the software server in the physical ENVIRONMENT and any number of instances of the server in virtual operating systems software.

  (...)

  2) http://www.vmware.com/pdf/ms_licensing_faqs.pdf

  (a little antigo e desactualizado, mas represents licenciamento of Windows 2003 em Set/2006)

  Portanto - e simplificando - cada Edition match a different number of VM VMware vSphere em um, of acordo com sua propria licenciamento methodology (tal como referenciado no dinna link):

  -Standard Windows-> 1 VM Windows Standard edition

  -Windows Enterprise-> 4 VM Windows Enterprise edition

  -Windows Datacenter-> VM Windows Datacenter edition unlimited

  I hope ajude.

  Celso.

• Error cloning/Templating Windows 2008

  I just put in place a new system and I have installed Win 2008 R2, Datacenter Edition on a cluster of ESXi 4.0 host computer.

  Before I installed VM Tools in the comments, I could clone on the model (normal clone). However, as soon as I install the VM tools, I get the error attached almost immediately after the start of the process.

  The other strange thing is that I can snapshot of the virtual machine (using the Snapshot Manager) no problem.

  I noticed other people have had problems with this in win 2003 and I played with the options of VSS in the prompt - as suggested. It doesn't seem to be errors in the event if Viewer.

  Any ideas?

  Hi, I had the same problem, and I solved it install Windows 2008 R2.

  You can try to clone the wen VM that the virtual machine is turned off and this medication would be ok.

  The problem is that the clone when the virtual machine is turned off tried to squiece the guest operating system and which do not.

  Remember that windows 2008 R2 is supported, bat is still experimental.

  Sorry my English

  Leandro.