How to uninstall the printer driver
I have a HP Officejet Pro 8600 (N911a) installed on my PC Windows 7 Home Premium and it worked perfectly for several months, but suddenly a few months ago, he began to cause trouble: powering the printer after the PC, the PC could not connect to the printer. Error message: "communication in both directions with the printer is not possible.
I uninstalled the printer, but the driver (x 86) hpvpl09.inf for HP Officejet Pro 8600 was not removed and still stay on my system. I'm trying to remove it with "printui/s/T2", but it is not possible to remove it.
I tried to uninstall the printer and then reinstall it, but my problem persists.
I don't want my printer all the time, but I've start it when I want to print something.
How can I get rid of this driver so that I can reinstall the printer correctly.
Hi bmalm,
I understand that you have a problem remove the printer driver on your computer. I'll try my best to help you with this.
I recommend a level 3 Uninstall using HP Officejet Pro software and driver removal utilityof race.
If the problem persists after running a level 3, I recommend reinstatement of Windows Installer.
Reregister Windows install
Click Start and run, type MSIEXEC/UNREGISTER, and then click OK.
NOTE: even if you do it right, it might look like nothing happens but it does.
Click Start and then click Run.
In the run window, type MSIEXEC/REGSERVER, and then click OK.
Then try the uninstall and install again.
I hope this information can help, please let me know.
Thank you
Tags: HP Printers
Similar Questions
-
How to remove the printer driver under windows Vista software
How to remove the printer driver under windows Vista
Hello
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems--------------
If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to uninstall a printer driver?
I installed a printer HP 5600 driver & causing my system to reboot. I would like to uninstall it, but I can't find where to do.
Hello, Doug Sinclair,.
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks that you are having problems with uninstalling the printer driver.
Follow the steps to uninstall the HP 5600 printer driver.
a: click on Start > Control Panel.
b: Now click on programs.
c: Look for the printer driver in the installed programs.
d: right-click on it and select Uninstall.
Meet us if you face problems with a driver or any other problem of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
How to uninstall the printer software
I can't get my printer HP Deskjet 3940v at work; I tried the troubleshooter without result. I want to completely uninstall the printer.
I have the original disc for the printer that it is came with, so if I can remove all of my hard drive then I can re - install the printer and see if that solves the problem. I don't think that the problem lies in the hardware itself. HP offers more support for this printer.
Here is the problem and my question for the forum: (I am a novice) I went to Control Panel then printers and removed the printer from this location. But I don't think that uninstalled everything. I looked in programs and features, and I see there, no program to uninstall. (No HP, no Deskjet, no program to a printer).
I downloaded Revo Uninstaller and it still doesn't show any HP or other programs of the printer on my computer. But there must be something that has to do with the printer still on my computer. I looked in other posts on this site but didn't know what steps to uninstall a printer under Vista.
Can someone tell me the steps to completely uninstall the printer software?
I use Vista Home Premium OS on my Sony Vaio computer.
Hi Mike,.
To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:
Did you do changes on the computer before the show?
You can uninstall and reinstall the printer in Device Manager and check if that does the trick.
See these articles for more information:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Solve printer problems
Hope this information is useful. If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.
-
The error message "printer is off-line" showed a day all of a sudden
I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.
The download (or Install) window presented with percentage bar.
but the percentage remains at 0% for 10 minutes.
I thought that something was wrong with the Scan Doctor
I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).
I uninstalled it then tried to download the same driver on the HP site.
It is same as the pilot of scanning and printing doctor;
same window, "0% download" forever.
Now, I'm totally at a loss. Have what wrong I done? How can I make my printer work again or how do I know what is the problem?
The driver is big enough, I would say save to disk, and then run the installation program. You could do a right click on the link here, select "Save as", then download the file. Depending on your internet speed, it make take some time downloading. If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.
-
Cannot uninstall the printer driver
I installed a Samsung universal and now impossible to uninstall with Windows 7 printer driver. I removed the printer and still no luck. I read your previous posts and pointed out that the Windows cleanup utility apparently in is no longer available. How can I remove this driver?
Hi Peter,.
Uninstalling the driver is a little different from the uninstallation of software.
Please follow these steps to remove the driver:
- Unlug the printer and restart the computer
- Use this guide to remove the old driver: http://www.petri.co.il/removing-old-drivers-from-vista-and-windows7.htm
- If you want to use the printer, then install the correct driver now
- Plug the printer back
Kind regards
Helene
Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer
-
When cleaning a Windows Vista laptop, I uninstalled the print driver for the HP Deskjet 920 because I thought it was for a different printer is no longer used. Usually, you can just download a driver from the HP website; Apparently, this was included in the software for the computer when it was purchased and cannot be downloaded. There is no way to re - install or I'll simply use another printer?
Try to download the Deskjet 990c driver.
(Shane_R) has a great post on how to do it.
I would like to know if it works.
-
How to reinstall the printer pixma150
I followed the instructions how to uninstall the printer, but how do I reinstall it please help me. I have the original disc supplied with the printer, but it does not start in the disk drive.
Hello
You can check the links to see how to install a printer.
https://support.USA.Canon.com/kb/index?page=content&ID=ART161312
http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8
Thank you.
-
hp photosmart 8050 printer, install the printer driver for hp photosmart 8050
don't know how to install the printer driver for hp photosmart 8050, can't even see. Help
There are two 8050 models, here are the HP instruction form
-
This model encrypted?
If this is not the case, how to destroy the hard drive? Where is the hard drive?
Hi @Diane47,
Thanks for joining the Forums of HP Support with your request to printer.
I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.
HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.
You can clear the memory by restyoring the printer back to the default values.
1. on the printer Panel, select Setup.
2. from the Configuration menu, select Tools.
3. on the Tools menu, select Restore Factory Defaults.
HP offers to recycle their products for you. If you want to know more about it, please click here.
Please let me know if that solves the problem, or if you need assistance.
Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
HP deskjet 1000 do not print using windows 7 How to the printer driver
My hp deskjet 1000 printer do not print using windows 7 How to the printer driver
It worked before on this PC?
Full features drivers are here, select the bit version correct victory
-
How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."
The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)
My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.
-Dov
PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!
-
C6280: Could not locate the printer driver base download
We have lost our ability to print on the same day as Windows 10 has been applied automatically. The next day, I have restored our computer to Windows 7 without error, but we have lost our ability to print. Then, I downloaded the print driver full of features, but received an error message that Setup encountered an unexpected error (code 2203) during the installation of this package. I tried to use the two methods (USB and ethernet). I uninstalled and reinstalled the software again, but the same problem has resulted. I also used the "HP Print and Scan Doctor' and 'impression' Assistant and still have the same problem. Something in the printer driver fails during installation. I spent days looking for possible solutions. Now I'm ready to just install a basic printer driver - but I can't find where it is on the site of HP for Windows 7 (64 bit) for the HP PhotoSmart C6280 all-in-One. Can you help me?
Hi @Hanagriff,
Thank you for joining the HP Forums!
I see you are trying to find a basic driver to use for your HP Photosmart c6280 printer. I'm happy to help you!
Please try the steps in this post How to assign drivers to Print in different Versions of Windows, from @Shane_R, and this will show you how to install a basic driver.
If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
I hope that's what you're looking for!
-
I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked. How to unlock. Computer is a Dell and printer is a Lexmark.
Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:
The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:
I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked. How to unlock. Computer is a Dell and printer is a Lexmark.
What exactly is the software that you have installed?
Ken Blake, Microsoft MVP
The software is called RegWork. I had to pay for it. It is not yet enabled. It seems to be just a type of utility to clean my system scan. Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
Should I continue to carry out this activation or should I unstall it.What makes you think that Microsoft Security Essentials recommended
It? That cannot be good.You must uninstall it. Registry cleaning programs are all snake
oil. The registry cleaning is not necessary and dangerous. Leave the
Only registry and do not use any registry cleaner. Despite what a lot
people think, and try to which suppliers of software record cleaning
convince you to have used really doesn't hurt registry entries
you.The risk of a serious problem caused by a registry cleaner by mistake
delete an entry you need is much greater than any potential benefit
It can have.Read http://www.edbott.com/weblog/archives/000643.html
and http://aumha.net/viewtopic.php?t=28099
and also
http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspxLet me stress that neither me nor anyone else who warns the
use of registry cleaners never said that they always cause
problems. If they have always caused problems, they would disappear from
the market almost immediately. Many people have used a registry
cleaner and never had a problem with it.The problem with a registry cleaner is that it carries with it
the risk of a significant problem. And since there is no
benefits of using a registry cleaner, running that risk is a very bad
good deal.
Ken Blake, Microsoft MVP -
get error ul 101-8200 cannot uninstall the printer
This message keeps coming up so I can't uninstall the printer software
Hello
· What is the brand and model of the printer?
Method 1:
Follow these steps and check if that helps
(a) click on your "Start menu", then "settings", then "printers and faxes" menu. This will show all of the printers and faxes currently associated with your computer.
(b) if it is currently associated with your computer, delete the printer from your computer. Right-click on the printer icon and select 'delete '. Confirm the deletion by selecting "Yes" in the pop-up window.
(c) access the "Server Properties" menu in the menu drop down "File" at the top of the window. Select the 'Drivers' tab at the top of the window. This will display all the printer drivers installed on your computer.
(d) highlight the printer driver that you want to delete by clicking on it once. Click on the button "Delete" under the list of drivers. Click 'Yes' in the context menu to remove the driver. Repeat this step to remove drivers that are additional, if necessary.
Method 2:
To resolve this error, upgrade your printer software to the latest version.
How to download and install the latest printer driver from your printer manufacturer's Web site
http://support.Microsoft.com/kb/2677141/en-us
Method 3:
If you have the latest version of the software and the error persists, this could be due to malicious software on the computer. Run an anti-malware program to identify and remove malicious software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Maybe you are looking for
-
External hard drive 1 TB-PH3100U-1EXB
I get a message saying that the software is not found, but I inserted the disc in my computer. I have Windows XP. Have I bought the wrong external drive or is there any software that I can download? Or should I buy an eSATA? I managed to install the
-
Satellite P200-144: how to disable the TurboCache graphics card
Hello Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well Thank you
-
Impossible to install standalone vista sp2 on my hp Pavilion
I tried all the suggestions on the center of supposrt I'm unable to install sp2 on my laptop with vista
-
Three years ago the Defender has been uninstalled on my pc Windows 8.0. I can re-installed on my pc today?
-
HP Pavilion dv6-6119wm HDMI and VGA works do not both together
Good evening, I have a laptop HP Pavilion DV6-6119wm Quadcore with AMD Radeon graphics card, which includes a VGA port and an HDMI cable. Together they are so close that you cannot connect both at the same time, but as I needed this so much, I cut th