[Windows 7, 64-bit] Xbox controller wireless connects for about 1 minute, then disconnects

Similar Questions

• Windows 7 HP is responsible and can run for 2-3 minutes then the computer crashes and returns to the startup program

  After opening windows computer HP 7 is loaded and can run for 2-3 minutes then the computer hangs and goes to the startup program. However, in safe mode, it remains open without any problems. Recently, the only problem I've had is that the MSN server is not running and has been replaced by BABYLON, who refuses to uninstall itself. I system restored to all the possible dates and problem remains. Can anyone help please

  Scan with these two free tools

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  What anti virus or third-party maintenance utilities have installed?

• Windows 7 64 - bit SP1 apparently random freezes for about 30 to 60 seconds

  Other users of the computer,

  I am using windows 7 64 bit home edition premium for a few months now. I have a problem in which windows seems to freeze. It can happen anywhere from 4 or 5 times the time to 'only' once every two hours. I can move the cursor, but I can not click on windows, use alt - tab and so on. Usually, this will last between 30 and 60 seconds, after which everything returns to normal. It seems no matter what I do when this happens. During navigation, games, Assembly, etc... The gadget from windows performance tells me the cpu is about 1-5% and the RAM is not at maximum. I tried to:
  -set the system to high performance. HDD sleep disabled. Hybernation and disabled sleep
  ran-a cleanboot. Problem has happened yet (playing Battlefield 3)
  -a run the File Checker system windows using an elevated command prompt. No problem there.
  -checked all (1 SSD and HDD 2) drives for issues with checkdisk and SeaTool. No problem found.
  -checked for malware malwarebytes with MSE. No problem there.
  -uninstalled VLC player I saw a dozen of entries "reconfigure" in the form of reliability of windows (or whatever it's called)
  -disabled Aero icon composite (?) Use the Dutch version so I'm not sure of what his English in)

  -turned off refresh of wallpaper

  -order stickynotes (as I came across something where the viewer in which he said he could not access)

  -closed sidebar and practically another program that was underway...
  .. and still the problem occurs. I don't have this problem under Vista 32 bit but I must say I have updated my graphics card and added the SSD at about the same time, I decided to move to W7 64-bit.
  These days I kept a journal when it happens. When I cross check these with the event viewer I get a few events 4624, 4672 and 7036, which stand out. They do not seem to take into account all issues well.
  Some system info:
  Windows 7 Home Premium SP1 64-bit
  Intel Core 2 Quad Q9550 2.83 GHz
  4 GB of Ram
  MSI GTX 560 Ti
  1 x OCZ agility SSD 3
  2 x WDC 1 TB SATA HDD
  Any help would be GREATLY appreciated as I don't know where to look for more. Once again, thank you for reading!
  Best regards
  Rombout

  I spent a lot of time to check all components in my configuration. From the bios, cables on memory, software and so on. It turned out to be the ocz vertex 3 ssd which was the question. I made an update of the firmware, secure erase, and all I could do with the help of assistance from ocz with no sollution. I'm the DSS to return this week and exchange it for one ssd intel. Check the forums to ocz for your type of ssd n additional info to see what you could try. If not, return it immediately.

  Good luck!

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• Whenever I have start Windows and run Firefox, it crashes when I enter a Web site. It continues for about 5 minutes.

  Firefox hangs on for about 5 minutes after the start of the system. Deactivation of the modules does not help.

  Hello Aram767, we are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with the ID's crash to help us learn more about your accident.

  1. Entered on: crashes in the location bar (this is where you enter the URL of your Web site) and press ENTER. You should now see a list of submitted incident reports.
  2. Copy the 5 most recent accident ID that you see in the accident report window and paste them in your response here.

  Thank you for your collaboration!

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image

  original title: video editing

  When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image. How can I see the video in its entirety, but long, so I can change it to what I want?

  What is the extension of the home movie file?

  Windows Movie Maker doesn't accept the formats of files (extensions) following:

  Video files: ".asf", ".avi", ".dvr-ms", ".m1v", ".mp2", ".mp2v", ".mpe", ".mpeg", ".mpg", ".mpv2", '.wm' and '.wmv '.

  * Extennsion file or the file format is represented by the last 3 letters of the file.

  If the file format of your home theater is not on the list above, google for a FREE video converter and a change in WMV format. Then re - import to Movie maker.

  WMV is the most reliable and foolproof format for Windows.

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

  Hello world.

  New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.

  When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.

  Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?

  Thank you

  . / height

  I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.

  So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.

  I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.

  See you soon,.

  Dave

• Go to Windows 7 32 - bit on cursor wireless 3000 Y410 problem

  Hello

  I recently installed Windows 7 32 bit on my Lenovo Y410 and drivers work for the most part out of the box. However, I have a problem with the switch wireless slider. The switch does not respond when cold start (wireless stays off), but works very well to wake up from sleep mode. I tried Vista drivers of a Lenovo installation for the wireless card Intel, as well as the Bluetooth driver installation of BroadCom.

  Anything else I can try to install or change in the registry?

  Very appreciated

  tuks

  
  

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• WRT120N to Xbox 360 Wireless connection

  Hello

  My wrt120n worked perfectly with my xbox 360 until two weeks ago. I can connect to xbox live without problem but unplug it always within 10 to 15 minutes, my PC doesn't have this problem.

  My SSID and WPA2 Personal are correctly configured. I have forwarded ports 53-3074 Beach, yet I always disconnect. My NAT is not upward too strict or moderate. When I look at my network on the 360, it abandons the connection entirely for about 3 seconds and it finds automatically. My IP are staticly Setup. My firmware has been upgraded.

  Any advice would be appreciated.

  My 360 has been positioned behind my PC from my router and was causing the outcome that seems. Anyway, problem solved, no shit was due.

• Wireless connectivity for Sony Vaio VPCS132FX

  I have problems with connecting to wireless networks. My switch seem ok, but once I turn it on, it says on the screen as in the wide still and cannot get connectivity.

  Sometimes it turns on and turns off again. My model is the Sony Vaio VPC 132 FX and using windows 7 64 bit.

  I need help.

  Hello, Solomon,

  Try the procedure described at the following link:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/31903/c/65%2C66/kW/31903

  If the problem persists, check the following steps:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/31669/c/65%2C66/kW/31669

  If my post answered your question, please mark it as an "accepted Solution".

• Drivers of wireless connection for laptop HP G6-1138ee

  I just downloaded a new window of operating system 64-bit on my laptop, but I can't seem to find drivers or software for the wireless connection, wpuld anyhelp much appreciated

  You are the very welcome.

  I think I can get the drivers you need.

  For the 8086, you need the chipset driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  For the 10EC, you need this:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  Paul

• Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?

  I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610.  Nothing went well.  I can print but not scan, and often copy is extremely slow for no apparent reason.

  I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation."  I used HP correction for this, did everything it says and ran the download as an administrator.  When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection.   But the HP installer does not accept or acknowledge inserting the USB key.  It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.

  When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.

  There is no file 'help' in the menu 'start '.

  I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.

  Someone at - it suggestions?

  In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.

  In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.