Windows 7 Activation VMWARE View

Similar Questions

• Samsung NC-240 - Windows 7 with VMware View connection problem

  Hi all

  My Samsung NC-240 is set to connect to my server VMware View Connection Manager. I can connect to one of my Windows XP via PCoIP or RDP virtual desktop very well, but I can't connect to my virtual Windows 7 desktop. Whenever I try to connect, it will be wrong and tell them "Session Lost!"

  Research in the NC-240 event log, I see the following:

  11 d, 00:01:09.260 > ready to connect to the host

  11 d, 00:01:21.990 > connection to the host (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.020 > using resolution 1920 x 1080 at 60 Hz on DVI port 0

  11 d, 00:01:22.150 > CONNECTED (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.160 > receiving power state updated: S0

  11 d, 00:01:22.960 > CURRENT SESSION

  11 d, 00:01:23.600 > (MGMT_RDP): invalid capability length (20)

  11 d, 00:01:23.600 > connection down (RDP protocol error detected)

  11 d, 00:01:23.680 > lost Session!

  11 d, 00:01:23.680 > (MGMT_RDP): INIT: received unknown event 0 x 20!

  Here is the information of the current version of my NC-240:

  Part number of the firmware: FW010034

  Hardware version:

  Firmware Version: 3.0

  Firmware Build ID: v250

  Firmware version Date: December 7, 2009 15:55:15

  PCoIP processor revision: 1.0

  Bootloader Version: 2.1

  Bootloader version identifier: v163

  Bootloader Build Date: August 28, 2008 16:56:13

  Here is the information of the current version of my Agent and VMware View VCM:

  VMware View 4.0.0 - 210939

  I appreciate any input.

  Thank you

  Sang A

  I think it's the same than P20 then try wyse page

• Office 2010 Activation - VMware View 5.2 different material

  I could use a little help.  Here's the situation.

  I have a new view environment.

  I have 3 ESXi 5.1 servers - we'll call it Host1, Host2, Host3.

  Host1 is brand new and slightly different from Host2 and Host3. (They are a bit older)

  I did all my tests on Host1.  Including build my master Windows 7 Image and install all of the applications that I need.

  As part of the master Image, I activated Office 2010 before making a snapshot and pushing through related clones.

  Linked clones are now balanced between all 3 hosts as it should.

  All of my users who have VM on Host2 and Host3 now see 'Office 2010 Activation' screens.

  Seems Office has detected a difference in the level of material and is asking them to "Activate Office" again and they have no administrative permissions to do this.

  An idea of the best way for me to get around this problem?

  If I manually activate Office - he goes - right up until I do a restructuring - then it returns.

  Thanks in advance.

  You use a KMS server to activate office or try to use a MAK key?    It is considered to be best practices when dealing with view to use a KMS server

• License of Windows OS using VMWare View approx.

  Hi all

  How anyone with Windows 7 deployment with 3 VMware display technology?

  For example:

  Given that we will deploy for 10 of the new office (renovated), is - this means that I still have to buy 10 x Windows 7 license?

  Thank you.

  Kind regards

  AWT

  Each operating system must have its way license.

  You can use the license for sale at retail or a specific licesence for OS centralized:

  http://www.windowsvista.com/VECD

  André

• VMware View 5.3.1 and functional level Windows 2012 R2 Active Directory

  Hello

  As I read in https://www.vmware.com/support/view53/doc/horizon-view-531-release-notes.html

  VMware View Horizon does not support the Windows Server 2012 Active Directory Domain Services (AD DS) domain functional level. You can use Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2 AD DS with Horizon of VMware View domain functional levels.

  Does this mean I can install VMware View 5.3.1 in an environment with Win 2012 R2 AD set to Win 2003/2008/2008 R2 functional level?

  It is a facility supported?

  Kind regards

  Does this mean I can install VMware View 5.3.1 in an environment with Win 2012 R2 AD set to Win 2003/2008/2008 R2 functional level?

  Yes that's correct.

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• VMware View Guide to optimization for Windows 7

  Hello

  Since I've run the attached script in the Guide to optimizing VMware View for Windows 7 on my virtual offices for example, Internet Explorer and Adobe Reader does not start. There is always an error message that says sth. as you are trying to access an invalid address.

  

  Someone at - it an idea which setting in the batch is causing this problem and how to fix it? Same thing is happening to Adobe Reader, I tried to run the first time after installation.

  Best regards

  Adrian

  Hello

  I have attached the script but at the same time, I found the problem:

  REM disable address space randomization
  Reg ADD "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" v MoveImages /t REG_DWORD /d 0 x 0 f

  After removing this entry in the registry and a reboot, the problem has been resolved.

  Best regards and thank you

  Adrian

• VMware View - Windows 8?

  Hello

  I am new to this forum and VMware so please be delicate :-)

  First of all, I would like to just confirm that VMware View 5 does not support Windows 8 OS, right? So what (older version number) version of Horizon view don't?

  I already have vSphere Client Version 5.1.0 so if I buy the Horizon view I should be able to deploy Windows 8 workstations, right?

  
  

  Best regards, Valentin

  Hello

  You need VMware view 5.2 for windows 8 supported https://www.vmware.com/support/view52/doc/horizon-view-52-release-notes.html

  What's new for the 5.2 Horizon

  VMware view Horizon 5.2 offers improvements valuable to the terms of use and ease of management, further reducing total cost of ownership for VDI.

  What's new with the end-user experience

  • Support for Windows 8 according to desktop computers¹
  • ¹ 3D graphics hardware acceleration
  • Best video and VOIP with Microsoft Lync 2013 support⁴ communication
  • Simplified access to desktops of Horizon view²
  • Easily connect to any device with HTML³ access desktop
  • Improved productivity from mobile devices with the new feature 'The unit touch'^3A

  Concerning

  Mohammed

• VMWare View slow slide windows when you use two monitors

  I am experiencing very slow slide of windows from one monitor to the other when using VMWare View Client. I followed all the documentation on configuring dual monitors in VMWare View and I removed the background images, Windows 7 Setup, configure the video settings for better performance. Not sure if I'm missing something. Help, please.

  Hi Joshua,.

  Here are KB which may help you if you have not seen that.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2010359

  Concerning

  Mohammed

• VMware View Client can 'close' host Windows 7?

  Can VMware View Client 4.6 'close' a client Windows 7 physical host device when it is turned on (Thin Client or desktop running Windows 7)? The behavior desired is to let the user simply turn on their thin Client or a desktop computer running Windows 7 Starter Edition or another version of Windows and not Windows desktop appears. The VMware View client connects directly to the broker and then to the VM user login screen? The customer or the user of the Dektop can simply access the connection of the user view not the physical host Windows box?

  For XP/XPe installed locally on you thin client, you can change the default shell of Explorer to wswc.exe (Customer View). More information about this you can read here: http://blogs.vmware.com/view/2009/02/vmware-view-client-as-a-shell-for-xpe-and-xp-pro-clients.html

  According to me, this thing with some addition settings should work with Win 7.

  There is also some proprietary software, for example: http://www.thinlaunch.com/thin-desktop-client.asp

  UPD: Guide step by step for Win 7 Ultimate, business and professional: http://communities.vmware.com/message/1639813?tstart=0

• VMware-view-open-client for windows

  Hello

  Anyone know why there is no vmware-view-open-client for windows?

  http://code.Google.com/p/VMware-view-open-client/

  Laughing out loud

  The windows version includes PCoIP that isn't Open source.

• VMware View and MS Windows 7 License Manager

  I'm looking to install VMware View and use Windows 7 Ent or

  Pro as the guest operating system.

  What are the Microsoft Licensing options?

  Is the use of a server KMS, the best solution, or should I just

  use a key in the specification of customization, as I did with Windows XP?

  If you have a deployment of medium to high, I suggest to use a KMS server to validate the license. If you enter your MAK license and deploy several pools or in the pool even over and over again. each time Windows will activate using a new MAK license until they are all exhausted.

  I just went through an installation of KMS server, and I have to say was one of install it more simple I've ever done.

  Here are some links to help:

  http://www.toddlamothe.com/deployment/Office-2010-KMS-host-server.htm

  http://www.toddlamothe.com/Windows/setting-KMS-server.htm

  Mike...  VM, virtually!

• T5520 HP with Windows CE 5.0 can not connect to VMware View Portal

  Hello people:

  I tried the VMware View 3 solution in a test environment, I have already tested with my laptop configuration

  and when I decided to start trying with a thin client questions start

  First of all, I look in the compatibility guide for a customer support light HP and I got the HP T5520 with a Windows CE 5.0 operating system.

  and when I try to log in to the portal to view VMware via http:// < Server ip & gt; I got an error indicating that the operating system is not compatible wich I do not understand because the compatibility guide says it's compatible

  After that I tried to do a manual install through execution of the installer and the system there is no enough space to install which is meaningless too.

  I'll apreciate any help because I can't understand how this model may appear as compatible and give me this questions to test my VMware View solution

  Thank you

  It was indeed option (2), it's fairly well hidden on the HP website, but you need to download their "VDM Broker Add-On for Microsoft Windows CE": http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=500832&prodNameId=500833&swEnvOID=2051&swLang=13&mode=2&taskId=135&swItem=vc-67534-1

  It can be found in the section "Software - System Management" of their support for the HP T5520 download page. Thanks to wponder and the team of the HP Alliance for pointing me to the finger in the right place.

• XP Service Pack 3 VDI model - deployment use and Windows XP Service Pack 2 deployment tools?  VMWare View, virtual center of customization specification Manager.

  I'm setting up a VMWare View deployment and I need to configure Performance Manager in Virtual Center Customization Tools.  Use the deployment tools XP Service Pack 2 for my model pack 3 XP service or do I have to download SP 3 tools?  Documentation on the internet points to SP 2 tools, but I can't find a definitive answer for XP SP 3 machines.

  I don't think anything changed in Sysprep between XP SP2 and SP3 of XP.  I use Sysprep in an XP SP2 CD deploy.cab file to customize my XP SP3 image with no problems.  You should be able to use Sysprep tools on the CD for SP2 for your model.

• VMware View 6.1 Zero-Client disconnect

  We have recently updated our platform VDI of VMWare View 6.1 using vSphere 6.0 and Nvidia vGPU (K1 grid). (HP T310 ZeroClient 4.7.1)

  Some of our users complain disconnects, some users have this error more than others.

  The mouse stops and a disconnect after 30 seconds.

  Here are a few journal entries:

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: = > new connection request < =.

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_address in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_port in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:42:41.131 > LVL:2 RC: 0 AGENT: customer address is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: for gentle host: using Version 1 Tag

  25/03/2015, 08:42:41.132 > LVL:2 RC: PRI 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} for gentle host ID of Session: Tag: "W/AenY + In + UA" value: 5bf01e9d8f889fe5

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: server_listen_on_addr is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:42:41.132 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: type = 2

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} ID of Session = 4; Codec = 2.

  25/03/2015, 08:42:41.132 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: backtrace Journal 1

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: {s_tag:0x5bf01e9d8f889fe5} pcoip_server_win32 launch

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: path to the logfile {s_tag:0x5bf01e9d8f889fe5} optional specified as "C:\ProgramData\VMware\VDM\logs\".

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: {s_tag:0x5bf01e9d8f889fe5} use_vmware_launcher = true.

  25/03/2015, 08:42:41.135 > LVL:2 RC: AGENT 0: create_session_process: open pcoip server process handle 00000000000003DC

  25/03/2015, 08:42:41.135 > LVL:2 RC: AGENT 0: tera_agent_launch_server: code {s_tag:0x5bf01e9d8f889fe5} Launcher using VMWare: worked [system is vista or newer, windows session id: 0 x 1, pid: 0x1e4, handful of proc: 0x3dc].

  25/03/2015, 08:42:41.381 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 00 00 00 00, len = 144

  25/03/2015, 08:42:42.135 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] waiting for ready message.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] Got ready message.

  25/03/2015, 08:42:42.236 > LVL:2 RC: 0 AGENT: selected server_addr is 0.0.0.0:4172 (order of the host)

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] to connect to the mailbox on the server.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending the session tag.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 136 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #0 key ='pcoip.enable_tera2800 "value =" 1 ".

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 48 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #1 key ='pcoip.priority_level "value =" 4 ".

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} bytes 47

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #2 key = 'pcoip.server_fqdn' value ='PS-VDI-01. PROJECTSERVE.local'.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 71 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] end of options: sending message null-option

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 26 bytes

  25/03/2015, 08:42:42.362 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 05 00 00 00, len = 136

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] session to add to the list.

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] the number of active sessions = 1

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending ok connection response.

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] connection_response (end), 0

  25/03/2015, 08:42:42.580 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 0 b 00 00 00, len = 16

  25/03/2015, 08:42:42.602 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} MBX_CON_COMPLETE

  25/03/2015, 08:42:42.602 > LVL:2 RC: AGENT 0: monitor_soft_hosts: connection_complete {s_tag:0x5bf01e9d8f889fe5}: SOFT - MBX_CON_COMPLETE

  25/03/2015, 08:42:43.645 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} thread of control: connection_complete (MBX_CON_COMPLETE) callback is successful

  25/03/2015, 08:42:43.646 > LVL:2 RC: AGENT 0: mb_send_acknowledgement: {s_tag:0x5bf01e9d8f889fe5} send ACK.

  25/03/2015, 08:42:43.646 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 8 bytes

  25/03/2015, 08:42:43.748 > LVL:2 RC: AGENT 0: mb_send_acknowledgement: {s_tag:0x5bf01e9d8f889fe5} srvr0004 Succeeded

  25/03/2015, 08:52:46.565 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} server is dead.

  25/03/2015, 08:52:46.666 > LVL:2 RC: 0 AGENT: tera_agent_disconnect [guest]: close the agent code: 6, disconnect reason: 0

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_disconnect: {s_tag:0x5bf01e9d8f889fe5} sign out is * NOT * pending (hndl: 4 pid: process handle 484,: 000003dc)

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_disconnect: {s_tag:0x5bf01e9d8f889fe5} server process already stopped (hndl: 4 pid: process handle 484,: 000003dc)

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_finish_disconnect_thread: connection_closed 6

  25/03/2015, 08:52:46.939 > LVL:2 RC: AGENT 0: sSERVER_SESSION: ~ sSERVER_SESSION: {s_tag:0x5bf01e9d8f889fe5} closing pcoip server process handle 00000000000003DC

  25/03/2015, 08:53:01.517 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: = > new connection request < =.

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_address in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_port in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:53:01.518 > LVL:2 RC: 0 AGENT: customer address is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: for gentle host: using Version 1 Tag

  25/03/2015, 08:53:01.518 > LVL:2 RC: PRI 0: pcoip_agent_connect_req: {s_tag:0x3c5d2733bc4b5aa} for gentle host ID of Session: Tag: "A8XSczvEtaoA" value: 03c5d2733bc4b5aa

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: server_listen_on_addr is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:53:01.518 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: type = 2

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x3c5d2733bc4b5aa} ID of Session = 5; Codec = 2.

  25/03/2015, 08:53:01.518 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: backtrace Journal 1

  New Windows driver is GA and the ESX pilot remained the same so, fortunately, only an update of the Windows driver.

  Link is here.

  NVIDIA DRIVERS NVIDIA GRID VGPU SOFTWARE VERSION 346.68/348.27 WHQL