Windows 7 and Windows XP memory recommendations

Similar Questions

• Windows 7 memory 64-bit dump blue screen while playing the Star craft 2 and Battlefield 3 in and out of sleep.

  Original title: 64-bit Windows 7 memory dump blue screen

  Specifications of the computer

  CPU: Zambezi FX-4100 3.6 GHz (Turbo 3.8 GHz) AMD Socket AM3 + 95W Quad-Core Desktop Processor FD4100WMGUSBX

  Motherboard: ASUS M5A99X EVO AM3 + AMD 990 X SATA 6 Gb/s USB 3.0 ATX AMD motherboard with UEFI BIOS
  GPU: 01 G-P3-1460-KR of EVGA, GeForce GTX 560 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card
  RAM: G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3 8500) desktop memory model F3-8500CL7D-8GBRL
  PS: CORSAIR Builder Series CX500 V2 500W ATX12V v2.3 80 MORE certified Active PFC Power Supply
  SSD: OCZ Solid 3 VTX3-25SAT3 - 60 G 2.5 "SATA III 60 GB MLC "
  HARD disk: SAMSUNG Spinpoint F3 HD103SJ 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "drive hard internal-Bare drive
  OS: 64 - bit Windows 7 Home Premium
  It's a new generation and I have all updated drivers, bios, and Windows updates. I set my virtual memory for two hard drives (min: 8000/Max: 24000). I run PrecisionX in the background with stock settings, and Asus II HAVE suite and my CPU is overclocked to 3.8 (recommended turbo). I run CNettoyez on a regular basis to solve registry problems.
  I had my new blue screen of generation of dumps from memory, about four times since I built it. It comes into play, i.e. of Starcraft 2 and Battlefield 3, and once when he came out of sleep. I ran a memory test, and he says that he has no problem. Suggestions or anything like that, I need to test again?
  On a side note: don't suck my HDD or is it decent? 1 TB, 3 Gb/s, 32 MB cache. My OS is on my SSD as well as Torchlight 2, and the rest of my stuff on my disk HARD of Starcraft 2 and Battlefield 3, media and stuff.

  Thanks for your help. I think that I thought about it. The "timing" on my ram is disabled, so I manually set in the BIOS and see what happens.

  Also, it would cause W7 to freeze coming out of sleep? I had this recent problem where when my computer out of sleep and it wouldn't wake up and my CPU LED should blink slowly. After turned it off, I will re-start and it would be nice, but now it is that whenever I put it in sleep mode.

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• I have a message saying "windows virtual memory is low"

  I'm using windows xp (32) bits and a message keeps coming up saying "Windows virtual memory is low" what can I do about it please can someone tell me? ".

  If you mean that you see a message like this:

  Virtual memory minimum too low: your system is low on virtual memory.  Windows is increasing the size of your virtual memory paging file.

  This means that Windows XP is to let you know that he does his work.  The message is not an error message - this is an informational message.

  If XP thinks that the size of the swap file (usually c:\pagefile.sys) is too small to accommodate your day-to-day transactions, it will adjust the paging file to expand the pagefile and display this message as it does.  It is not necessarily a 'problem', but the message is boring.

  Sometimes, the message indicates someone was tampering with the XP of the paging file settings to try to solve another problem that usually has nothing to do with their paging file and resolve things inefficiently.

  This could mean that the settings have been adjusted for certain values that don't make sense for the configuration of the system.  Unless we know the system better, you can't just pick certain values out of the air and that your system behaves effectively.  You might not see the message again, but this does not mean that the settings are correct.

  This could mean that the settings have never been properly in the first place when you first install of XP and things must be properly configured.

  Sometimes, as your system configuration changes over time and other applications are running and get bigger, you may add additional RAM to your system to accommodate things (or run the number of requests).

  At least that learn you more about managing memory than Windows XP, it is usually best to simply let XP manage the size of your virtual memory paging file.

  To see what your current, make settings right click post work, properties, advanced, performance settings, Advanced tab, virtual memory, and then click the button change.

  Make a note of the current settings in case you need to change their return more later.

  The best setting for the size of swap file is usually going to be:

  System managed size

  Right click my computer, properties, Advanced tab, Performance... Settings, Advanced tab, virtual memory... Change.

  Note the current setting, so you can change things later if you have a problem.

  If it is already done, on the size of swap file:

  System managed size

  Don't forget to click on Set (to be defined), OK (several times) and then restart your computer.

  Windows XP will attempt to affect a swap file approximately 1.5 times the total amount of RAM installed on your system.  To manage the size of paging file Windows XP is enough for most configurations.

  If your system is not set to the size of the managed system, you must determine how it changed and why (usually a bad reason), make a note of the current settings to change them back later if necessary, and then change the setting to the size of the managed system, click on the Set button and then click on apply to apply the changes (you will be asked to restart).

  "Because someone told me to" is not a good reason to start making adjustments to the size of pagefile.  Setting just above to enlarge it by an arbitrary value can ease the symptoms of the problem and stop message, but may not result in the best configuration for your system.

  All the advice to 'Increase the value of the initial and maximum size to a higher value' are misinformed ideas that come from not knowing how to work XP - How do you increase it and what happens if you increase too?

  If you want your system to operate as efficiently as possible, you must understand what is happening and fix it properly and not only begin to try things or make some arbitrary adjustments.

  The size of the pagefile can really need adjustment, but you should at least try to know what you're doing and why you need to do.  It is unlikely that anyone can tell you how to adjust your settings properly without more information.

  If you don't know what are the best settings, or if you are not sure what should be your settings and need help looking at your stuff, follow these steps:

  Since the implementation of the Microsoft Answers forum does not ask for any kind of information system when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  This minimize back Q & A and eliminate the guesswork and assumptions.

• Windows virtual memoria baja

  that means windows virtual memoria baja

  Hello

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Windows Server Memory sharing

  Hello
  
  We are running Oracle 10 g 2 on Ms Windows 2003 x 64. Now according to:
  
  http://download.Oracle.com/docs/HTML/B13831_01/tuning.htm
  
  7 setting Windows to optimize the Oracle database:
  7.4 configure Windows Server is an application server
  
  Please guide how to change Windows Server memory to the model of network applications?
  
  Thank you to

  As it says, see the documentation for the operating system.

  For example http://technet.microsoft.com/en-us/library/cc728171.aspx
  This will take care of you the underlying parameters. There is therefore no need to hack the registry.

  Edited the link.

  Published by: orafad on December 17, 2010 11:19

• My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.

  My son used my daughter and wifes UAC because I had his safety to tight to his liking. My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.  My UAC (admin) is fine. I opened his account and it's good? It seems to me that all UAC accounts would receive if it were a virus? My wife and my daughter lost all the photos and several icons on the desktop. The Help window opens automatically when you connect. The two seem to have lost the Explorer, I am at a loss. Any suggestions?

  Hello

  'insufficient memory' and hidden data

  If this is the case you can be infected

  read the error messages wrong than some malware product to try to rip you off at the link below

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _______________________________________________________________

  otherwise, the foregoing:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience.

  Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience. Seems that these sites will not recognize that I am under firefox 10.0.2, these sites work fine in chrome, but not firefox.

  Message on the gmail website:
  A few important features may not work in this version of your browser, if you have been directed to the basic HTML version.

  Message on myspace:
  Upgrade your browser for a better experience of Myspace.

  Can you try to reset your useragent parameter? Instruction can be found here, see the statement of Helper7677 3rd

  • https://support.Mozilla.org/questions/760152

• Satellite A30 921: how to remove and replace the memory?

  Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

  Thank you in advance.

  Hello

  There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

  Good bye

• My XP PC is slow and says virtual memory is low while playing facebook games

  Original title: My XP PC is slow and says virtual memory is low

  When I try and play facebook games pc freezes and error comes up saying virtual memory is low, the pc is very slow

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. This only happens with the games on facebook?
  4. what browser do you use?

  Try the steps and check them off below.

  1. Click Start, right click my computer and then click Properties.
  2. in the System Properties dialog box, click the Advanced tab.
  3. in the results pane, click settings.
  4. in the performance Options dialog box, click the Advanced tab.
  5. in the virtual memory section, click on change.
  6. change the value of initial size and maximum size to a higher value value, click on set and then click OK.
  7. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  See the articles to optimize your computer for optimal performance.
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Right-click on the exe to PS file and choose Run as administrator. I think you choose the option "check mail", it will not ask again.

• Please suggest tool use ability to control host and VMs CPU, memory resources.

  Please suggest tool use ability to control host and VMs CPU, memory resources. What are the parameters to be monitored, their level of thresholds.

  What is the TOP / ESXTOP.

  Hi friend

  Here's the blog post detailed ESXTOP:

  http://www.yellow-bricks.com/ESXTOP/

  There is a VCOPS product that can also help you to understand so many parameters. You can try the license of the Foundation which is free of cost. There is a lot of intelligence if you go for paid VCOPS.

  VCenter graphs/stats can also help you as well.

• CQ61-319WM and AC twin memory RAM speed

  I bought the CQ61-319WM with / 3 GB or RAM.  The provided configuration is a badly matched set of a 1 GB SODIMM (A-Data) and a 2 GB SODIMM (Samsung).  According to CPU - Z 1.54, both pieces is 400 MHz (DDR2 - 800 MHz), latency CASE 6-6-6-18-24 and according to Memtest86 + 4.00, the result is speed of the RAM of 3481 MB/s using 64-bit transfers (single channel access).

  Upgrading to a configuration usually total memory dual channel results in a good Speed up, I decided to replace the 1 GB SODIMM with another 2 GB.

  I had a piece of 2 GB to another previous project, but it was a version special high speed with latency CASE of 5-5-5-18-23.  I decided that a pair of them so completely taken over would be the best that I could reach, so I bought a second piece (about 80 $ CAN) and put them in.  I've also upgraded the BIOS F.13 (and my Memtest86 + 4.10).

  The result is better, but not as good as it could be.  Reports of CPU - Z full CASE 5-5-5-18 is used and I think it's saying that the dual channel is active (or he's saying that the RAM can support double channel - I am not sure).

  Memtest 86 + (4.00 and 4.10 versions) indicate that the CASE has indeed changed to 5-5-5-18, but that access is still 64-bit (single channel) and the speed of RAM increased to 3614 MB/s.

  3614 MB/s is faster than 3481 MB/s, it is not as fast as I expect 5-5-5-18-23 memory to be if it is currently running dual channel (128-bit access).

  I believe that the BIOS has probably decided to stay "single channel" because the RAM is in a configuration that was unexpected (because the latency CASE is too fast).  However, this probably means that if I buy another piece of 'standard' 800 MHz DDR2 (CASE 6-6-6-18-24) and install it with the original Samsung RAM, it will probably run at full dual channel (128-bit).  Such a configuration should be faster than what I'm running now, despite the fact that the RAM by piece real speed is slower.

  Anyone used this RAM (2 x (2 GB, 800 MHz, CL6)) the installation program?  Can anyone confirm that the result is a configuration complete dual channel?  I can buy the RAM, but if she does not run dual channel, so it's just a waste of money.

  Note: It would certainly NOT let fall to the bottom as for two-channel to 667 MHz.  Such a decline would result in approximately 2600 MB/s even double channel speeds up access.

  I heard generally good.  Curiosity prevailed, and I bought one more piece of RAM.  This piece has been another 2 GB DDR2 800 MHz SODIMM, but this time with the same latency than the original equipment numbers (CASE 6-6-6-18-24).  I installed it with the original Samsung CQ61-319WM and speed of memory that result was exactly the same as the pair (CASE 5-5-5-18-23) faster RAM.  The computer has finished 3-pass of Memtest86 + 4.10 as the fastest pair of RAM, confirming also the speed.

  This tells me that the speed increase had nothing to do with issues of latency, and she had to come from the increase in speed of access memory (128-bit) 'Dual Channel '.

  As to why Memtest86 + 4.10 is reported as "single channel", I feel that the answer may have to do with the RAM 'Side Port' CQ61 graphics system.  According to published specifications, this computer has 128 MB GDDR2 (and memory).  It does not say how this memory is configured.  If it is the only channel (128-bit), then it could be that Memtest86 + sees.

  To confirm this, I took the pair of quick latency RAM and put it in another computer that uses an older AMD 690 chipsets, and the same pair of RAM ran in dual channel mode on the other computer, but at a lower speed of 667 MHz.  Therefore, it seems that AMD memory controllers have probably no problem with this pair of RAM running in dual channel in general.

  While nothing that I've done is quite conclusive, indicates that this computer was probably working with access memory dual channel for two configurations of 4 GB RAM I used.

  In any case, I'll leave the slower RAM in the computer because whenever I change my configuration of memory, I have to lose more than 3 hours running Memtest86 + to check it's OK.  If I did not need to get an acceleration, I will use the faster RAM later in something else.

  There might be a reason to use the best of the RAM (which is probably more recent technology and probably using a little less power), but I don't want to spend more time on this issue.

• What is the difference between the invisible and removeChild() to memory and frem rate?

  What is the difference between the invisible and removeChild() to memory and frem rate?

  There is probably no difference except with removechild, the object is not have a depth.

  Despite the help of everyone, always objects occupy memory and affect the rate.  Flash still needs to follow the positions of the two and both can trigger positive hittests.

  must be drawn, so it's best to use either set the alpha to zero.

• User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

  Additional memory added, installed the new video card...
  Reboot a windows XP user name screen. any user identified.

  Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

  -JW