Windows 7 "backup in progress" will not stop

Similar Questions

• Windows XP on my laptop will not stop from the start menu.

  It goes to the screen that says Windows stops, but he never does.

  Hello

   
  1. do you get an error message/code?
  2. don't you make changes to the computer before the show?
  3. which antivirus program is installed on the computer?
   
  This problem can occur if a third-party program or application prevents the computer to shut down.
   
  I suggest for the link and follow the steps in the article:
   
  You cannot log off, restart or shut down your Windows XP-based computer
  http://support.Microsoft.com/kb/831431#top
  -Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  -ATTENTION: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  In addition, the link and follow the steps in advanced troubleshooting.
   
  Your computer stops responding when you try to shut down in Windows XP
  http://support.Microsoft.com/kb/313290#top
  -Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  -Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  -Note: Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Laptop will not stop after update to 8.1 windows

  I have a new aspire E1 - 572G that will not stop completely during a windows 8.1 update

  I updated the Bios and downloaded the drivers from the support site.

  I did a restore to factory default settings and tried... again no luck

  I installed windows 8.1 after installing the updates for windows al.

  I'm not left how to solve this problem!

  Any suggetions are welkom.

  Found! Why are there two displayadapters in this notebook?

  I removed the intel one and rebooted. Windows dectected the displayadapter of intel again... problem solved!

• whenever I connect to the web, windows setup will light up. He continues to ask the companies to office and will not stop. He interrupts everyone and everything that I do everything online

  I can't windows to stop coming on and asks me to install the desktop business drive. It starts as soon as I connect and will not stop, interupting everything what I do online

  Hi marcus,

  1. What is the full error message that you receive?

  2. have you recently trying to install a program on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then repair Microsoft office on the computer and check if it works.

   

  How to understand the repair feature in Office 2003 and Office XP

  http://support.Microsoft.com/kb/822238

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  Husband confused,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  06/15 / 1104:36: 37 pm

• Windows is repeated will not stop running

  I turned on my computer and the window is "recovery" will not stop turning. Help!

  Unplug, hold button power for 30 seconds and release it, plug your computer, reboot.

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

• HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

  I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

  Hey @David146,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your PC, press CTRL, ALT and DEL keys at the same time.
  2. Click Start Task Manager.
  3. Select the HP software from the list.
  4. Click end task.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Laptop will not stop or sleep

  Hello

  I recently bought an Acer E5-571-54YJ.

  The laptop works very well and fits my needs for the school.

  Only problem I have with it is that it will not stop or go into sleepmode.

  When I stopped it after a few seconds when the screen goes black I mean the closed disc and fans to stop spinning, but blue remains on. I must then manually turn it off by holding the power button.

  Even with its in sleep mode. The light stays on and I can't turn it back on again. I have to first manually stopped in now the power button and then start it upward.

  I tried to disable the quick start, but this does not solve the problem.
  I hope someone can help me quickly because it's really annoying that I can't put it in mode 'sleep'.

  If you want more information, just ask.

  Greetings,

  Jean-Paul

  First of all, make sure that you have the latest version of the BIOS.  If the update to the latest version of the BIOS fixes the problem, then please don't read any more.  If the update to the latest version of the BIOS doesn't fix it, then continue reading.

  http://www.Acer.com/AC/en/us/content/drivers#_ga=1.190056232.264310007.1474604665

  

  -------------------------------------------------------------------------------------------------------------------------------------

  Do not read anything below, or attempt anything below unless you have the latest version of the BIOS and will always have the problem.

  If you have Haswell-ATU as the computer linked below - i5 4210U, then the only two known workarounds I know are using the Intel Management Engine interface driver 8.1 Windows 9.5 or install Intel MEI 11.0.0.1181.   If you have Intel Management Engine interface driver 11.0.0.1146 installed, it would be the problem.

  https://UK.hardware.info/product/269206/Acer-Aspire-E5-571-54yj/specifications

  http://community.Acer.com/T5/S-and-R-series-laptops/Acer-Aspire-S7-392-power-will-not-turn-off/m-p/3...

  http://community.Acer.com/T5/E-and-M-series-laptops/E1-572-won-t-go-into-sleep-any-longer/m-p/405847...

  http://community.Acer.com/T5/S-and-R-series-laptops/R3-471T-not-shutting-down-completely-or-turning-...

  Internet search or this forum.  There are tens of thousands of messages that describe problems associated with sleep/stop Haswell-ATU and Windows 10 and usually driver boost a/k/a turbo Intel MEI 11.0.0.1146 11.0.0.1146.

  Yet once, most people use the 9.5 intel management engine interface driver (a Windows 8.1 driver) as a workaround to resolve the problem.  Go to Device Manager and try to restore.  Roll back may or may not give you the Windows 8.1 driver.  You may need to install it manually.

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• 18 XPS does not start, the power light will not stop flashing

  I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.

  The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.

  I'll change that.  I went back in and re-removed the cable from the battery.  I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• The SPACEBAR keystroke will not stop.

  My iMac recently started having a problem where the system gets a touch SPACEBAR which will not stop. I think that is what is happening based on the spaces added to the text on the screen in different applications, and from the keyboard Viewer which shows the SPACEBAR constantly depressed.

  This isn't a device keyboard problem. I tried several keyboards. I also tried to unplug all connected to the mac and rebooting. The problem persists. I stop after several reboots (which seems a coincidence). I have also reset the PRAM, which seemed to have fixed, but now he is back (after about 24 hours).

  I don't know what else to try. I have not installed new hardware in the computer, since I bought it (upgrade of ram). It worked fine for 1.5 years.

  Try resetting the SMC by iMac SMC and PRAM reset, it may take several resets to work.

• El Capitan will not stop or restart.

  El Capitan will not stop or restart.

  My Macbookpro 2015 EL capitan will not stop or restart and hangs with a desktop wallpaper.

  Any help?

  If you have installed the Wacom software try to uninstall.

• After the Macbook to Yosemite 10.11.15 update, it will not stop

  I have therefore updated the latest version of Mac OS x at 10.11.15. During installation, all work fine including the reboot and restart the macbook. But when I tried to stop my Macbook, it will not stop. The macbook has not frozen, but the tab is disappear after click on stop. Now, I have the macbook shutdown by pressing the power button / stop. Is there a solution?

  Software for Tablet Wacom has been proven to show this behavior. Uninstall or try to remove your connection point