Windows 7 bsod 'Kernel Power' errors and bugs.

I built my own PC and installed windows 7 64-bit. have a lot of stability issues.

I formatted the Partition o/s and re-installed with only minimal software and still blue screens!

Errors in the paper are either checking bug like this... The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa8001f799d0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000).

Or errors in core like this power: the system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

I have many minidumps etc but no tool to examine the...

In fact, I just them loaded up to my sky drive...

http://CID-af314679bdeeac55.SkyDrive.live.com/self.aspx/.public/041210-16738-01.zip

I have a mirror RAID hardware for my o/s using the matrix aboard the intel RAID Controller and could get a lot of warnings in the log of events like this:

An error was detected on device \Device\Harddisk1\DR1 during a paging operation.

I tried to fix this using the tools for the RAID controller, if I check and repair the volume, then the errors disappear for a few days, but then start again.

I hope that I don't have a hardware problem... I ran the windows recovery options which reported no material error.

The specs of my PC are:

Intel Core i7 950 CPU

ASUS p6t Deluxe V2 mobo with 6 GB of RAM Patriot

2 x WD SATA 300 GB hard drives configured in RAID 1

Videocard ATI Radeon xfx4770

can anyone help me track down the issue?  I also have a pro 9000 Logitech webcam that I uninstalled now to see if this is the cause.

See you soon,.

Danrth

Error checking 1a is "MEMORY_MANAGEMENT.  This indicates memory corruption has occurred. This may be due to a hardware failure (defective RAM, for example), or a bad/buggy driver.

Consider the following general guidelines to treat the type of memory, corruption problems which could mean a defective hardware such as memory, or a bad driver.

Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

Also consider running SFC/scannow.

If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

Tags: Windows

Similar Questions

  • 41 Kernel Power error

    I've had my laptop for almost a year, but recently it has started crashing because of the power of the core - it's what it says in the papers of the events anyway.

    I don't know what is the cause, and I can't find my receipt from the shop, I bought to fix, because it must still be under warranty.

    The laptop gives me the dreaded Blue Screen Of Death when it crashes and it happens at least once a day, sometimes it will crash when I'm even not doing anything.

    I don't know whether it is hardware or software related well.

    I'll do a clean Windows 7 install, if the problem is software related but

    Hello

    The drive Self Test (DST) short error code would indicate that hard is defective and must be replaced.  It is also compatible with the kernel power error event you received.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

    Kind regards

    DP - K

  • Windows has encountered a critical error and close in one minute

    Whenever I have reconnected my network cable, I get the error message "Windows has encountered a critical error and will close automatically in a minute. Please save your work"and another message,"Services and controller app has stopped working ".

    The computer is running in offline mode and in safe mode, but the lack of internet access is a little pain!   I am currently using another computer to look for solutions.

    I tried the system restore, but when it restarts, it says that it is not successful.

    I checked the log of the observer of events and event ID 1000 error which suggests that "services.exe" is the problem.  I ran Malware and anti virus scans and there is no problem in the report.

    I had a problem with the AV Security Suite fake Scam three days now, this problem has been fixed, but the AVSS stuff has been removed, but this problem comes from the time.

    Is it better to just to do the restore to factory settings option? It's extremely frustrating!

    Thanks for any help/advice anyone can give.


    Thank you.    I had a CD of "Install Drivers on my computer" Dell.  When I put that in, it listed the available drivers and I extracted the files on the network card driver and it reinstalled a new network adapter driver.   Have had no problems since last night when I did, so all it seems has (finally) been resolved.

    For me, the return of the AV SEcurity Suite malware download problem.  This has been the most problematic bug I encountered.    At the end of the day, a clean installation of Windows Vista seems to have solved this, and reinstalling the driver for the network card.   I have not elsewhere found the Web to REaltek site it useful as the link does not work (it says I don't have permission to access the download). When I contacted their support, they pretty much told me to do what it says on its Web site and, of course, it did not work.  It made me hunt for this driver CD.

    It makes me happy, I had these original discs of installation provided with your computer, saved me a lot of £s!

    Thanks again for your help.

  • Windows Update has encountered an error and cannot display the requested...

    I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »

    Hello

    (1) what is the description which are impossible to install updates?

    I suggest to follow the steps provided and check if it helps.

    You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614

    Hope this information is useful.

  • How can I stop Windows from automatically restart so that I can scan? "Windows has encountered a critical error and it restarts in 60 seconds"

    How to disable the restart automatic windows vista minute by minute and enable MICROSOFT SECURITY ESSENTIALS to his SWEEP of the REGULAR SECURITY?

    Each time windows vista is fully on, after a few seconds it is automatically followed by a pop up message that reads as follows: "WINDOWS is MEETING A CRITICAL ERROR AND IT WILL RESTART in 60 SECONDS." I know that this is caused by a virus. You have experience with this kind of problem? Please provide steps on how to fix this problem if possible. Thanks to you all.

    original title: HOW TO DISABLE WINDOWS VISTA RESTART AUTOMATIC MINUTE-BY-MINUTE

    Hi Readen Astorys,

    Method 1
    Step 1:
    I suggest to start the computer in safe mode and check if the problem persists.

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

    Method 2
    I also suggest to run virus scan online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

    Additional information:
    How to remove a computer virus?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

  • Wireless problem Post Infection - Windows has encountered a critical error and close in one minute.

    Hello

    I recently had my computer infected by the virus of the Ant-malware Doctor and I believe that it has been completely removed now. However, I think that one of its components attached to a driver of key computer or something and when I removed it I accidentally deleted this essential engine with it. So I can not access the internet for more than a minute. If I turn on the wireless, I connect but immediately the computer says: 'Windows has encountered a critical error and ends in a minute' and 'Service and controller app has stopped working and was closed ". I checked also further in my error reports and think that it may also have something to with THE COUNTER Service? It is difficult to correct the situation when I can't access internet from my computer, but I can use another computer and transfer the files needed to repair the damage. Also I have a product Id, but as Im not using my own computer (to which the Id is attached), I can't access to professional advice. But if someone here can help I would be very grateful. IM thinking of uninstalling Service Packs and reinstall them but I'm not a computer expert. Thank you in advance.

    Updated after you have everything installed Norton Internet Security on my laptop the scans detected some trojan infectios and I'm checking for more information and to remove all the. Also, when I've updated my Norton Internet updates no warning sign came on a mistake criticism or service and controller app. It seems that viruses are to blame for the problem and despite the using various anti-virus software and scan many times before Norton virus remained unchanged. It's possible lack of virus definitions updated authorized to do this as the internet connection difficulties made difficult to download updates lasted. Thank you, and if the problem doesn't go away, I'll re-post say.

  • Windows XP Fatal Sys "c000021a" error and file sharing problems

    I have a Windows XP pc which has received the following during startup, error message "c000021a... system fatal error of ocx000034 w/status" and that followed several instructions troubleshooting with no resolution. Given that the pc does not start, I wanted to first of all, remove the hard drive in order to try to save the data to another media, before I try to reinstall the OS from the XP installation disk.  Unfortunately I can't access the files due to permissions/access errors and ask for any recommendations. I am a novice not necessarily w/computers, but willing to try and learn something new... without spending $ to a service technician.

    This isn't a good idea for troubleshooting and one that tells you to go back to school XP.

    Are you able to get into the Recovery Console?

    What means the error usually is that somehow the file c:\windows\system32\winlogon.exe has developed missing.  This may occur if your antivirus/antimalware unspecified program examined the file a threat and quarantined (effectively removed) it.

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    If you can get into the Recovery Console, there are copies of the file of winlogon.exe in other places on your system, then here are the commands that I ran the RC to see if you can replace the file:

    Copy c:\windows\system32\dllcache\winlogon.exe c:\windows\system32

    or

    Copy c:\windows\servicepackfiles\i386\winlogon.exe c:\windows\system32

    Answered in the affirmative if invited to replace the existing file and then you should see a
    message 1 file (s) has been copied.

    Remove the CD and on the RC line, enter 'Quit' and the system will restart.

    P.S. in the future, never shorten the error messages see you.  There is a lot of error message that are similar, so try not points of suspension (...), text, numbers, etc.  or you might get a response that says «Try...» "and it will help you!

  • Windows Update up code 80244019 error and after a retry, I have an infinite "check updates".

    I tried to install Windows 7 on another new hard drive, once windows finishes the installation, I install the motherboard drivers, then the keys to the internet, so as soon as I search for updates in Windows Update I code 80244019 error, then I try again once or twice I have "install the new Windows Update software". To check the updates, you must first install an upgrade for windows update. "Your automatic update setting will not change... to install the update will automatically close and reopen. After i 'install', I and infinite "check updates". This has happened 3 times now when I tried to install Windows in a new ssd. I have no idea what to do.

    Hi Fabio,.

    My sincere apologies for the late reply. Where did you get your Windows 7 installation media?

    Looks like you need to get a new copy with integrated Service Pack 1.

    See instructions how you can download a new copy:

    How to: What are my options for Windows 7 reinstall media?

  • Data BSOD kernel paging error WIN 8

    So after reset factory back to Windows 8, I have problems with the kernel data inpage error bsod.

    I downloaded the files from all dmp the bsod's happened in the last 10 hours (they were all kernel data inpage error)

    https://onedrive.live.com/?ID=2A559E63505EE297%21109&CID=2A559E63505EE297

    First of all need to be updated to 8.1.  In itself, which can solve the problem

    Secondly, none of these DMP had activated of driver verifier.  What was the result when you run check/query?

  • I get a code 80073712 (windows update encountered an unknown error) and doesn't install KB2518866. Why?

    I get this error for some time and would like to get it resolved.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712

    Try the procedure described in the article above.

  • Boot Manager Windows keeps giving me an error, and I can not boot vista now. : O

    Hey guys, I have more solutions for the time and thought that I have turned to a group instead of address on mine.

    When the problem started?

    This morning, so a few hours there.

    What have you tried to fix it?

    Restore Vista CD

    What is the error message (all)?

    Says, the file: \Windows\System32\Drivers\oduzt.sys
    Situation: 0xc0000225
    Info: Windows could not load a critical system driver is missing or corrupt

    I've never heard of this file...

    What was the last thing you did before the problem started?

    Tried to delete/remove virus and malware
    Malwarebytes
    used, Microsoft's malicious remover<-- from="" microsoft="">
    the Microsoft file was the last thing I used before that happened.
    literally on reboot has happened.

    What are your system specs?
    Vista sp1 home
    Laptop Gateway
    Guessing 32bits
    Model no: MA7
    Model mt6840
    I'll tell you more if I could pull up? I can access the recovery cd cmd there at - it a command that will show?

    Do you have a screenshot?
    a little... haha taken with a camera...

    Also I was wondering... is there a way I can run a partition to say windows XP and take all the files off your computer and save them.

    then if it comes down to it, I can just empty the computer and install vista?

    Start your system and start typing the first F8 options should be repair you computer, select it, press on enter. Press the OK button on the next screen. It will ask for a user name and password, type you're windows journal on credentials and after that click ok. No system recovery tools in quick order.

    Type cd c:\windows\system32\drivers command and her then press ENTER after typing the command del oduzt.sys
    and press ENTER. After that, restart the system

    If you do not repair you computer after F8 try to boot from the disk and under the install now screen you can click on the repair, you're computer and there steps are the same. Let me know what happens...

  • Windows Update has encountered an error and cannot display the requested page after that I click on express update.

    Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

    Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

    Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

  • Error 41 and portable kernel power restarts

    Hello

    I get Kernel Power error 41 since these last two days, and my laptop has rebooted at least 15 times.

    Please help me find the cause of this error.

    The link onedrive for downloaded dump files is given below:

    http://1drv.Ms/1xUkbyG

    Thank you.

    Hello

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

    This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

    2: kd > .trap 0xfffff880035ae8d0
    NOTE: The frame trap does contain not all registers.
    Some registry values can be set to zero or incorrect.
    Rax = fffff880035aeaf0 rbx = 0000000000000000 rcx = 0000000000000000
    RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
    RIP = fffff880019a06fd rsp = fffff880035aea60 rbp = fffff880035aeb88
    R8 = 00000000ffffffbc r9 = 0000000000000044 = 0000000000000000 r10
    R11 = fffffa80043f2200 r12 = 0000000000000000 r13 = 0000000000000000
    R14 = 0000000000000000 r15 = 0000000000000000
    iopl = 0 nv up ei pl zr po nc
    NETIO! RtlCopyBufferToMdl + 0x1d:
    fffff880 '019a06fd 448b 5228 mov r10d, dword ptr [rdx + 28 h] ds:00000000'00000028 =?

    Definition r10d to the value at the address rdx + 28 on the failing instruction. They are volatile registers if we cannot verify who was invalid, but it was probably rdx. The network IO subsystem was in charge of the investigation, so something 3rd party is at the origin of the NETBIOS conflicts.

    --------------------------------------

    Remove and reinstall McAfee with Microsoft Security Essentials to temporary troubleshooting purposes, as it is most likely originally NETBIOS conflicts:

    Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

    -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

    Kind regards

    Patrick

  • Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

    Windows Server 2012: unexpected system error and restart w/dump?

    With the software running:

    (a) CA ARCserve Backup version 16.5

    (b) JAVA JDK 1.7.80

    (c) tomcat 7.0.59;

    (d) Symantec Endpoint Protection Version 12.1

    (e) PowerChute Network Shutdown 3. 1.0

    Should I plan to restart (I can only remote access) server for every 2 months?

    Running (without rebooting) non-stop over 6 months ago.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • I am running Xp media center edition 2002 SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

    "Whenever I start updating my computer, it gives suite Meassage" check if your computer has the latest version of Windows Update software for use with the website"then it will select the CUSTOM GOLD UPDATES EXPRESS updates, then when I click on one of these links it provides as follows"

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    [Error number: 0x8024400A]
    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    So please give me the solution of this problem as soon as possible

    Thanks in advance

    Hello

    To solve the problem, see these articles:

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/836941

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

    http://support.Microsoft.com/kb/883614

    It will be useful.

Maybe you are looking for

  • How to merge an old iTunes library on a new iTunes download

    I just got a new PC and downloaded iTunes.  I copied the files and my folders of music as well as the old library on the new iTunes folder files, but they do not appear in iTunes. The only options to import the music that I can find (wants to import

  • Diagnose the connection problem

    When a game on pogo.com my computer pop up says (diagnose the connection problem) I checked all comcast connectins. This only happens on one of the computers in my house. How can I fix it?

  • Aspire 5742-6798 UEFI boot problem

    I have an Aspire 5742-6798 provided with Windows 7 installed.  Someone tried to upgrade to Windows 8. Now, the laptop isn't even trying to boot from the hard drive. It goes directly to the initialization of the network. I started from the 8.1 Windows

  • Cannot install 2.5 "SATA HDD Inspiron 1525

    I read most of the posts, and I have tried EVERYTHING, no chance! Help! It's a WD blue 500 GB Here's what I tried... 1 format a partition using my brewing House, works well! Mounts and all! 2 formatted like a partition of concert 120 on my brewing Ho

  • New HP Pavilion DM1 4000 series max memory card

    Hello I am looking to buy a new ultraportable laptop and like the look of the new series DM1-4000. However, it seems that there are two versions available in the United Kingdom - the 4004SA DM1 and DM1-4027SA. The data sheet pdf, the noticeable diffe