Data BSOD kernel paging error WIN 8

Similar Questions

• Windows 7 bsod 'Kernel Power' errors and bugs.

  I built my own PC and installed windows 7 64-bit. have a lot of stability issues.

  I formatted the Partition o/s and re-installed with only minimal software and still blue screens!

  Errors in the paper are either checking bug like this... The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa8001f799d0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000).

  Or errors in core like this power: the system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  I have many minidumps etc but no tool to examine the...

  In fact, I just them loaded up to my sky drive...

  http://CID-af314679bdeeac55.SkyDrive.live.com/self.aspx/.public/041210-16738-01.zip

  I have a mirror RAID hardware for my o/s using the matrix aboard the intel RAID Controller and could get a lot of warnings in the log of events like this:

  An error was detected on device \Device\Harddisk1\DR1 during a paging operation.

  I tried to fix this using the tools for the RAID controller, if I check and repair the volume, then the errors disappear for a few days, but then start again.

  I hope that I don't have a hardware problem... I ran the windows recovery options which reported no material error.

  The specs of my PC are:

  Intel Core i7 950 CPU

  ASUS p6t Deluxe V2 mobo with 6 GB of RAM Patriot

  2 x WD SATA 300 GB hard drives configured in RAID 1

  Videocard ATI Radeon xfx4770

  can anyone help me track down the issue?  I also have a pro 9000 Logitech webcam that I uninstalled now to see if this is the cause.

  See you soon,.

  Danrth

  Error checking 1a is "MEMORY_MANAGEMENT.  This indicates memory corruption has occurred. This may be due to a hardware failure (defective RAM, for example), or a bad/buggy driver.

  Consider the following general guidelines to treat the type of memory, corruption problems which could mean a defective hardware such as memory, or a bad driver.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

• Portege Z930 - BSOD kernel data by page fault

  Recently (3 days ago) my girlfriend bought Portege Z930, and she becomes BSOD kernel data in error page, randomly (battery or AC).

  Hardware config is: Core i3 Mobile i3-3217U, DDR3 4 GB, HD Graphics 4000, SSD 128 GB
  Software: it didn't install new programs, using the trial version of office, Google chrome and windows 7 64 bit which was pre-installed. Anyone have any idea, what could be the cause of bsod? Preinstalled software from Toshiba? Hardware malfunction?

  Also because off-topic information autonomy point is up to 5 hours (wifi on, light off, bright screen keyboard: 40%)

  On this virtual path, it is not easy to say what may be the problem. In my opinion, you should make data backup and install the OS by using HARD drive recovery option.

  After that do what you will have new own preinstalled OS. Test a few days without having to install anything just to see if the error appears again.

  Installation of HARD drive recovery operation, you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

• Laptop freezing - Data Guard really slow down the kernel inpage error

  Please help me

  All of a sudden my laptop looked at freezing constantly I restarted my laptop and it took forever so that it starts so I rebooted again and then on the start screen, he says he has repair disk errors

  When loaded it was always freezing all the time then the blue screen kernel data paging error occurred. WHAT SHOULD I DO :( I have basic it skills btw

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

• Can someone decode this for me kernel panic error message please?

  I had some problems recently with my 13 "MacBook Pro, Early 2011. I was able to resolve most of them between the forums and the Genius Bar, but there is still a persistent that even the Genius Bar can't seem to understand. Often, my computer freezes and restarts itself, and recently I had the window "your computer restarted due to a problem". I know kernel panic can be software or hardware related. I just wiped my hard drive (third-party SSD), reinstalled the OS X and restored from a Time Machine backup (but doesn't not restore any network or personal settings, as I was told by the Genius Bar help ensure no bugs/corruptions that affected my machine were installed). A complete hardware and software diagnostic was managed by Apple, where the only problem they found was that they could not read my hard drive and I have recommended replacing the hard drive slick, that I had let them. However, my problem: I have yet to have another random reboot with the new cable, but I am always starting gel, delay and slow speeds. I understood the message of the most recent kernel panic error, but I have little idea how do make sense. If someone could decode it for me and let me know what you think caused the kernel panic, I would be grateful!

  Quick notes (it may or may not be useful): I also installed new third-party RAM me, updated 4-8 GB. I also have problems taking videos on Photo Booth. When I do, app causes my computer to lag, and the video does not correctly record (late of video development, multicolor screen during playback, not only audio video, etc.). Check the video card came back clean well.

  Anonymous UUID: 52761E71-2C6C-A4F0-6320-518D613A8E30

  Game Aug 11 23:05:12 2016

  Panic report *.

  panic (cpu 0 0xffffff802a3ce6fa appellant): Kernel trap at 0xffffff802a10e2f6, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0XFFFFFF8511DEB5C0 CR3: 0X000000013ABE4067 CR4: 0X00000000000626E0

  RAX: 0X00000000BA769D69, RBX: 0XFFFFFF80FB4FF400 RCX: 0XFFFFFF80FB4FF408 RDX: 0 X 0100000000000201

  RER: 0XFFFFFF8133CD39F0, RBP: 0XFFFFFF8133CD3A60, IHR: 0XFFFFFF80FB4FF000, RDI: 0XFFFFFF822804401C

  R8: 0XFFFFFF8511DEB5C0, R9: 0XFFFFFF8526E83F60, R10: 0XFFFFFF8228044128 R11: 0X0F0F0F0F0F0F0F0F

  R12: 0XFFFFFEB29124F000, R13: 0XFFFFFF80FB4FF000, R14: 0X0000000000000F64 R15: 0 X 0000000000000001

  RFL: 0 X 0000000000010206, RIP: 0XFFFFFF802A10E2F6, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffff8511deb5c0, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 1

  Backtrace (CPU 0), frame: return address

  0xffffff8133cd3680: 0xffffff802a2dab52

  0xffffff8133cd3700: 0xffffff802a3ce6fa

  0xffffff8133cd38e0: 0xffffff802a3ec563

  0xffffff8133cd3900: 0xffffff802a10e2f6

  0xffffff8133cd3a60: 0xffffff802a3425af

  0xffffff8133cd3ac0: 0xffffff802a340f47

  0xffffff8133cd3b00: 0xffffff802a3435eb

  0xffffff8133cd3b30: 0xffffff802a348057

  0xffffff8133cd3d00: 0xffffff802a34debe

  0xffffff8133cd3f20: 0xffffff802a3cecef

  0xffffff8133cd3fb0: 0xffffff802a3ec475

  Corresponding to the current thread BSD process name: Google Chrome

  Mac OS version:

  15G 31

  Kernel version:

  15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

  Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

  Slide kernel: 0x000000002a000000

  Text of core base: 0xffffff802a200000

  Text __HIB base: 0xffffff802a100000

  Name of system model: MacBookPro8, 1 (Mac-94245B3640C91C81)

  Availability of the system in nanoseconds: 82778692404226

  last load kext to 18326096476143: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

  Finally unloaded kext to 18501757170760: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

  kexts responsible:

  com Sophos.kext.SAV 9.4.52

  com Sophos.nke.SWI 9.4.52

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  com Apple.filesystems.smbfs 3.0.1

  com.apple.driver.AudioAUUC 1.70

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  3.12.8 com.apple.driver.ApplePolicyControl

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleHDA 274.12

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMikeyDriver 274.12

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.driver.AppleIRController 327,6

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.DspFuncLib 274.12

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.3

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.iokit.IOBluetoothFamily 4.4.6f1

  com.apple.driver.AppleHDAController 274.12

  com.apple.iokit.IOHDAFamily 274.12

  com.apple.iokit.IOAudio!

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 22.1

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM2070

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

  Network service: Wi - Fi, AirPort, en1

  Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

  Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

  Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM2070

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  Bus crush: MacBook Pro, Apple Inc., 22.1

  I'm not sure regarding the panic itself 100%, but the symptoms you describe, I'll try to put first the original RAM if you, as a test. Also try a SMC reset: reset the management system (SCM) controller on your Mac - Apple Support.

• Satellite A200 - BSOD after downgrading from Win Vista to XP Pro

  HII

  I bought a Satellite A200.
  The windows vista family edition was the operating system that was installed.
  Compatibility issue with a particular software that I use, I changed the vista by a XP Professional SP3.
  But since then, the computer crashes and present a blue screen. I wish I had some ideas to solve this problem.

  Thank you

  Hello

  The BSOD can be caused by the problem of hardware and software problem.
  In your case it seems s due to software problem. Maybe a few compatibility problems between certain parts of the software

  First you need to check if you are using the version of Win XP BIOS Yes this laptop needs a Win XP BIOS, which could be found on the European driver Toshiba page.

  I m also interesting when the BSOD appears you installed Win XP successfully or it was not possible to install the XP because the BSOD?

  If you were not able to install Win XP then I guess you don't have included SATA drivers participating in the crib on Intel Matrix Storage.

  I recommend some threads here in the forum about this theme.

• Having a problem with my computer I try to restart and get BSOD saying internal error Planner video background

  Original title: Blue Screen of Death (BSOD)

  Hello im having a problem with my computer I try to reboot and I get BSOD saying internal error Planner video background

  Here is my mini dump file:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4807 & authkey =! AGKWUp-ndI0XBgE & ithint = the file % 2cdmp

  and here is my system info:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4810 & authkey =! AFloWJarqiE83QM & ithint = the file % 2cnfo

  im hoping that this will let you know what is wrong or not

  RW

  This phenomenon was linked to your video driver (atikmpag.sys) /DirectX.  I would completely remove the current driver and install the latest driver available.

• 41 Kernel Power error

  I've had my laptop for almost a year, but recently it has started crashing because of the power of the core - it's what it says in the papers of the events anyway.

  I don't know what is the cause, and I can't find my receipt from the shop, I bought to fix, because it must still be under warranty.

  The laptop gives me the dreaded Blue Screen Of Death when it crashes and it happens at least once a day, sometimes it will crash when I'm even not doing anything.

  I don't know whether it is hardware or software related well.

  I'll do a clean Windows 7 install, if the problem is software related but

  Hello

  The drive Self Test (DST) short error code would indicate that hard is defective and must be replaced.  It is also compatible with the kernel power error event you received.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• Error message States 'A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13' when try to open Microsoft Outlook 2000.

  Original title: Office of Microsoft Outlook 2000 does not open.

  Error message States "A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13 #

  Hi John,.

  1. what operating system is installed on your computer?

  2 How long have you been faced with this problem?

  3. don't you make changes on your computer before this problem?

  
  Reference: Outlook 2000 Solution Center

  Please post back and we do know.

• BSOD BCCode Code error: 9f in Windows 7

  while trying to activate my net connection or when passing the phone to the LAN in my office, I came across a BSOD. The error report Codes are as follows. The system is completely & regularly updated. The Anti Virus is Microsoft Security essential also fully updated. The error codes are as below:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 16393

  More information about the problem:
  BCCode: 9f
  BCP1: 00000004
  BCP2: 00000258
  BCP3: 85FDF020
  BCP4: 83D39A24
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Please help to find out what is wrong with the system.

  Rahul Mukherjee

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• When I try and play games my computer crashes or I get BSOD with the error Stop: 0x000000F4.

  Hello, I recently built a computer and installed all the software, drivers and updates of windows that I needed. Go and try to play games, I can play for a little bit. Then my computer crashes or I get BSOD with the error Stop: 0x000000F4. Generally before that happens, Skype will plant give me a message that says "error disk i/o" If that helps. How can I fix this problem so that this error does not happen again? It happened several times. I tried to reinstall the CMOS battery on the motherboard. I have the latest firmware of my SSD and drivers for my card mother and graphics card. My specs are:

  Windows 7 x 64
  I7 - 4770 k
  ASUS Z87 - a
  Corsair Vengeance 8 GB 1600 Mhz
  Modular power supply Corsair HX750
  Liquid chillers H80i Corsair
  EVGA GTX Superclocked 760 ACX
  Samsung 840 120 GB SSD (boot disk; the games installed on it)

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:
  1. go to the Windows\Minidump folder.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:
  http://www.WikiHow.com/use-SkyDrive

  Please note that all "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove files DMP when using because of their place too.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > failure > ensure there is a check mark next to "Write an event to the system log" > make sure that "automatically reboot" is unchecked.

  Ensure that the partial memory image is turned on and make sure the path is % SystemRoot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• VMFS5 data store shows several errors, which suggests the corruption of the file system?

  VMFS5 data store shows several errors, which suggests corruption of system files.

  the tool allows to check the VMFS file system

  vSphere disk Metadata Analyzer (LOVE)

• Sono uno student del Politecnico di Milano. Cercando di abbonarmi all 'offer by students nella sezione sulle information sull' istituto, una volta tutti i dati any, mi no errors the di continuare possibility. Come devo fare per abbonarmi?

  Sono uno student del Politecnico di Milano. Cercando di abbonarmi all 'offer by students nella sezione sulle information sull' istituto, una volta tutti i dati any, mi no errors the di continuare possibility. Come devo fare per abbonarmi?

  Hello

  This link may help: student software discounts, the eligibility of the student. Adobe

  Kind regards

  Sheena

• Lack the Menu "insert > Data Objects > Recordset Paging > Recordset Navigation bar.

  Hi all

  I pointed out the following tutorial.

  Build your first dynamic site - part 2: development of the back-end. Adobe Developer Connection

  
  In this tutorial is a section to add a record set navigation bar. I am unable to find this menu item.

  Insert > data objects > Recordset Paging > Recordset Navigation bar.

  
  

  

  Did I miss an add on?

  Thank you

  Badri

  This tutorial was written five years ago for Dreamweaver CS5. It is no longer relevant. The feature has been removed from Dreamweaver.