Windows 7 constantly hanging on Atipcie.sys

Similar Questions

• Volume under license of Windows 7 Enterprise Edition new install hangs at disk.sys

  Original title: installation of new Windows 7 hangs at disk.sys

  We have conducted our mail, ftp and video servers on XP because we expected a software upgrade for our video server, so that we can install Windows 7. The MB is a Gigabyte GA-H55M-UD2H Revision 1.0. Last week, I took the server down to do the installation of Windows 7 Enterprise. Using the ISO downloaded from our Volume Licensing account I burned onto a dvd it and booted from it.

  The system should start and begin installing Windows. The files would load and the screen change to . Then nothing. I fought with him for two days and I tried a thousand (Finally, much) "solutions, I found online, but nothing has worked.

  I cloned the drive that contains the system partition - formatted system partition (to record the logical drives on the other partitions) - and tried to install on the empty system partition. Same failure. I allowed the system to boot from the hard drive to the existing installation of XP and it worked normally (it's how I could get away with spending so much time on this: I could put the machine into service between tests).

  I took the drive cloned out of the machine and bread-boarded it with a new motherboard (different mfg/etc) and the monitor. I also moved the DVD player, I used during the installation of the system has failed.

  I started the machine, started on the burned dvd, and Windows 7 is installed perfectly. I have not installed all the drivers disk from the MB manufacturer.

  I moved the hard drive to three different Virgin machines awaiting completion and it Windows 7 has started and ran on all of them.

  O.K. - the server: re-installed HDD, disconnected from the other HD, DVD players, etc.

  Same failure: Windows 7 starts and crashes after a few seconds. The first time he hooked while to what was supposed to be the same point (disk.sys) guess since the time. Every other time it hangs after startup repair supply and completing l

  Go to research on the web it is clear that it is not yet near a problem isolated - I found pages and pages of the report and a variety of approaches to fix - it would take a lifetime to try them all. Surely MS is aware of this - it is hoped (in vain, I'm afraid) that he would have been treated by them. Maybe it's one of these 'features' that defies explanaton. But I hope not.

  Is anyone able to make a suggestion? TIA

  Aboonah

  Hi Aboonah,

  As you talk about Volume licensed Windows 7 Enterprise Edition, please ask your question on the TechNet forums. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itproinstall

  Thank you.

• \\WINDOWS\system32\...\nwlnkipx.sys

  I constantly receive notice of virus-> \\WINDOWS\system32\...\nwlnkipx.sys

  My virus program (avast) fails to remove this

  I'm not a computer expert

  Can someone help me?

  Try Avast support

  http://www.avast.com/support

• Vista hangs at crcdisk.sys

  Hello

  Another machine with a typical problem. My laptop Sony VGN-SZ290 primer not. When I do a boot to the top in safe mode, it hangs at crcdisk.sys. None of the other startup options not work either. I could do a memory scan and it came back clean. When it does not start, I have two options: 1) start Windows normally and repair Windows Run) 2. Neither one of those who will do anything, all I get is a white screen. In addition, like many people, I don't have a recovery disk. You would think that after paying $1,500, Sony could afford to spring for a $1 plastic coin, oh well. From what I see online, this is a common problem. Unfortuantely none of these solutions worked for me.

  Any help will be greatly appreciated.

  Yes, you will still be able to use your product key.

  Yes, sony should be able to get a replacement hard drive. It would be covered by any warranty.

  Thank you!

• XP hangs at mup.sys on startup

  MY DESKTOP FREEZES AT MUP. SYS ON STARTUP.  ANY IDEAS ON WHAT IS THE CAUSE?

  I think what AreilMT is getting in the light of the HARD drive blinks is the following:

  If you have a chkdsk scheduled to run at the next reboot (by responding affirmatively to the question, if you choose to run a chkdsk at the next restart), or if XP finds that any volume on your system that has been marked 'dirty', chkdsk will run when you restart.

  If you start in Mode without failure and chkdsk begins to run, the last thing you will see on the screen is mup.sys having been loaded... then the chkdsk will run in full.  Your system seems to be stuck.

  If the system appears to be hung on mup.sys and the HARD drive light flashes, it could be that the chkdsk command does what it is supposed to do or what you told it to do - check the volumes for consistency.  If this is the case and the HARD drive light flashes, you have to wait outside and which could take many, many hours depending on the size of your drive HARD, how many things about him and what chkdsk is to do.  Let it sit overnight if you must, but be patient.

  If this is NOT the case, then I suggest you power down, unplug everything except the keyboard and see if you can boot mode safe with only a keyboard attached.  If you have a PS/2 keyboard to use, I would use that instead of a USB keyboard.  A USB device or faulty driver can sometimes appear to hang on mup.sys to the system.

  It is also important to understand that the problem is not with mup.sys (it has already loaded) - it's what comes after mup.sys that could be the problem (if it is not running chkdsk).

  This is why there is zero logic when people see this scenario and begin to try to figure out how to replace mup.sys - that is not the problem, since it has already loaded.

  The next thing to load that sometimes causes problems is often the drivers keyboard and mouse - especially USB keyboards and mouse devices (mouse), therefore, you must unplug everything - especially USB devices.  You only need a keyboard plugged to press F8 to display the Advanced Startup Options, and then select Safe Mode and a PS/2 keyboard must be used if you can get your hands on one.

• Precision turn 5810, MDT, Windows 7: storage drivers (IASTORA. (SYS)

  I was the deployment of windows 7 for some time without problem with MDT.  I'm generally with problems of storage driver, but this machine has left me speechless.

  After you have successfully booted windows PE PXE environment and loading of the image on the disk, I keep getting hit with the 'Windows couldn't start, IASTORA. SYS, 0xc0000098, necessary to the file missing or corrupt"error on the first restart.   - So it seems that the wrong storage driver load.

  I did the following:

  I realized the machine precision changed name 'T5810' in ' tour 5810' (so my profile of driver selection is correct).

  Pilot selection profile is the CAB 5810 until files loaded from the serial number - the page I tried to scale older drivers back thinking that maybe a bad older copy charge.  I think that I'm loading v4.3

  I injected drivers into the WIM using DISM just in case. (including the Samsung NMVe drivers)

  I tried to use windows fix - it does not find the question... also responsible pilots he no useful result.

  Drivers (I think) are drivers intel with Plug - and - Play ID VEN 8086 DEV 8 62

  -J' checked this because I can load windows 7 using recovery DVD and there I saw the storage drivers loaded...

  For all the foregoing, I cycled between emulation ATA SATA, ACHI, RAID

  BIOS looks good I think... Secure boot is disabled, the legacy options on... Nothing to jump out of me

  He leads me Ben Ali...

  Seems to be in the intel family of adpater scsi "iaAHCI v4.3.0.1198.

  Hop this help someone else on the research

• Transfer of files of Windows 7 upgrade hangs

  Vista upgrade to Windows 7 on a 64 bit system.  All goes well until all 72% on the transfer of files.  Then she hangs up and alternates between please wait and the number of files.  only 300 files remain, but it has been blocked for hours.

  See the following aid as appropriate. http://www.techcular.com/Windows-7-installation-hangs-at-62-72-during-Vista-upgrade/

  Microsoft "Fix It" download the utility for 62%: "
  http://go.Microsoft.com/?linkid=9693817

  62% patch for Vista upgrade:
  http://www.SevenForums.com/installation-setup/36351-Microsoft-fixes-62-upgrade-hang-issue.html

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7
  http://support.Microsoft.com/kb/975253

  Windows 7 upgrade from Vista stuck at 63% (not the same problem as 62%)
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/4ed7e497-6b79-4978-afb4-17d6b0a31e33

  J W Stuart: http://www.pagestart.com

• extract the window just constantly said ' Hi welcome Extract. Loading in progress... " ?  @ DW 2015 still unable to load any file psd? How to solve it?

  extract the window just constantly said ' Hi welcome Extract. Loading in progress... " ?  @ DW 2015 still unable to load any file psd? How to solve it?

  This error seems to be corrected if you

  1. sign up for an Adobe ID on Adobe.com

  2. click on the link in the email that is sent to you as a result of registration which requires you to verify that you have registered the account.

  3. open Dreamweaver CC 2015

  4. open a document (you could open just a simple HTML document empty

  5. go to the navigation menu and open the WINDOW, make sure you are logged in with your Adobe ID, otherwise click Connect and connect.

  6. a window should appear asking you if you want to synchronize your settings.  Check the box for always do and click the sync button now automatically

  7. go to Window\Extract - the extract window should open with the tutorial

  8. Select DOWNLOAD PSD... This should not open the window instead of getting an error on LOADING...

  I hope this solves your problems... otherwise try to connect to 2015 CC of Dreamweaver, Dreamweaver CC 2015 closing, wait a minute or 2 and start over at step 3 above.

  It worked for most of my students.

• extract the window just constantly said ' Hi welcome Extract. Loading in progress... " ?

  extract the window just constantly said 'Hi welcome Extract. Loading...'?  @ DW 2015

  How to solve it?

  
  

  Hello

  Exit the office application window Adobe CC and tries to download the application directly from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Hope that helps!

  Kind regards

  Sheena

  Moving to the cloud creative download & install

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Photo Gallery hangs constantly

  Hey guys I hope that someone can help me!

  My Windows Photo Gallery crashes constantly... I can open it up and then after a few seconds a window opens telling me that "Windows Photo Gallery has stopped working". The same problem happened when you access my folder of photos but I changed the display of thumbnails for details and that helped.

  This is the log that I get every time crashes in WPG.

  Signature of the problem
  Problem event name: APPCRASH
  Application name: WindowsPhotoGallery.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549b56d
  Fault Module name: StackHash_6420
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e03821
  Exception code: c0000374
  Exception offset: 000afaf8
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 6153
  Information additional 1:6420
  More information 2: 2c32199fbe10bd37364b8a13d65538a7
  3 more information: 08f3
  Additional information 4: c186fd37dec2f3a5f660c44cc317e81e

  Additional information about the problem
  Bucket ID: 1929242451

  Any help would be greatly appreciated!

  Thank you!

  T

  Hi TKav,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  I suggest that you check to see if the problem persists in safe mode.

  Note: Display in safe mode wouldn't be good display drivers are disabled.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  I would also say that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CameraRaw.dll constantly hangs in Windows 14332 from 10 / nVidia 365.19

  I was last updated April 2016 CC Lightroom installed on Windows 10 build 14332, and CameraRaw.dll crashes. I have a GeForce GTX 680 with 365.19 nVidia Driver version.

  Here's a crash dump file:

  Lightroom.dmp - box

  What is going on?

  UPDATE: just installed latest nVidia Driver today 365.19; did not help.

  I tried with and without a permit the GPU acceleration. No effect.

  Can someone from Adobe please look the crashdump collection time, I spent and tell me precisely what's happening? All I could do is reduce to CameraRaw.dll

• Windows put constantly fails and causes more problems

  Running Windows 7 64 bit. I got my antivirus ESET NOD 32 Antivirus 4 protection.

  Update the downloaded window 4 updates, 2 installed and 2 were constantly lacking. Both of which have been not been (KB978382) & (KB978380)

  I restarted my computer several times, and because they are not install my computer acted very funny. Sometimes it will start fine, other times I get no internet and the computer hangs just at the level of the Office do not allow me to do anything. Whenever I go to the judgment, since these two updates failed, it keeps telling me I have new updates to install. It's a never ending cycle and a pain full in my _______. Any help would be greatly appreciated.

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB978382&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB978380&displaylang=en&stype=s_basic

  Download and install two boring updates manually. That should make them disappear.

  He is the current solution for the Office updates failing to install.

  TaurArian [MVP] 2005-2010 - Update Services

• Problem at startup with Vista - hang at crcdisk.sys - green bar still there

  Hello

  I have a big problem and I'm not able to find a problem.

  My laptop (Lifebook, Fujitsu A6200) always hang at startup when the green bar with the windows logo is moving (I restarted after 3 hours).

  When I starts in Mode safe, it hangs on CRCDISK. SYS. I left it run for 2 hours and it restarted somewhere in this period.

  I tried the Drivers and applications of restore disc that came with my laptop and it never found problems. I ran the startup of more than 8 hours repair and the balance sheet was not finished.

  I plugged my hard drive on another PC so I can access my data correctly, it is not a hard drive problem.

  I have not installed any application or any new hardware in the weeks before the problem appeared with the exception of the automatic updates of Windows. I don't think that the problem is a hardware problem.

  If possible, I don't want to reinstall windows.

  Thanks for your help!

  Chris

  Hi Chris,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Use system recovery tools to fix the problem, to access system recovery tools. To do this, follow the steps mentioned in the link below:

  How to access the System Recovery Options menu?

  See also the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  (a) System Restore: put the computer to an earlier point in time when the computer was working fine.

  (b) order to access Windows Recovery: run the disk check to repair bad sectors on the hard disk.

  At the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk /r , and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  (c) run the Windows Memory Diagnostic tool

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop hangs at Classpnp.sys file.

  So I installed Windows 7 the other night on my laptop.  I did the driver updates and installed Norton.  Also, I installed Office 2007.  Then I stopped it for the night.  The next day, I turned it back to install more than a few things.  A friend recommended that I have installed Ad-Aware, so I did and it ran.  I used it on some of my machines before without any problem.  I installed a couple more programs (SANDRA & CPU - ID), and then I stopped it for the night.  He got away.  I don't think anything, and after about 20 minutes, I did the strength.  I started up the next day and now it hangs at the windows startup screen.  I have tried the following to all the same results:

  -Repair System - hangs at the screen repair
  -Start normally - hangs at the windows startup screen
  -Start in safe mode - crashes the classpnp.sys file
  -Start in SafeMode with command prompt - crashes the classpnp.sys file
  -start in SafeMode with network - crashes the classpnp.sys file

  I even tried to put in the windows 7 disc to do a re-install and it hangs at the windows startup screen.

  It seems that no matter what I try I lift the block to the windows splash screen.

  Someone help please!

  So the other night, with that I tried a few more things all the same results.  Here is what I tried:

  -J' bought a second GB of ram, so I tried exchanging a stick, and then another - same results.
  -J' have bought a box hard drive, removed the formatted hard drive with another computer, ensured that I could save things he re-installed hard drive, booted from the CD - same results.
  -J' I bought a new hard drive, installed, booted from the CD - same results.
  -Replace the old hard drive with the 2 sticks of RAM - same results.

  After reviewing a number of things, I found that when Windows gets to "Starting Windows" screen, it checks your hardware to make sure that things are OK.  Well, my hard disk, RAM, CD player and video card are OK (I get all the right stuff video), so there are only a few things left, and one is the motherboard.  So, I think that there is a hardware problem which does not Win7 load completely.