Windows 7 detects no memory installed.

Similar Questions

• Does not display memory installed on the computer on Windows XP.

  Original title: RAM upgrade

  Hi again! I have another problem now. My computer is a netbook, EeePC1000, with 1.6 Ghz, 1 GB RAM and 160 GB hard. OS: Windows XP Home Edition. I tried the upgrade to you with a new memory KINGMAX-DDR2-PC5300-667 RAM. The problem is, my OS to recognize only 0.99 GB of the 2. What can I do? It's just a setting problem or other? Please help me! Thank you!

  Hello

  Your English is better than a lot of people I know and I'm English by English nationality!

  OK, from your description of the memory, it seems to be the correct sorting. I'm skeptical that a BIOS upgrade will help (I looked in the notes to upgrade the BIOS on the ASUS website), so let's check a few things before you consider as an option.

  First of all, what you do makes you think that Windows can see 1 GB? If this isn't it (or its equivalent)...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the computer: section

  .. .so please do the above and respond with the details.

  You say it's an EeePC1000 but is there something that comes after the 1000, for example H, HA, HD, HE or HG?

  Are you sure that the memory module you have purchased is actaully a module 2 GB instead of 1 GB module? Have you seen the actual label on the module (as opposed to its packaging)?

  When you start the PC, before Windows XP starts to load, you see anything by telling you how much memory is installed? It can not be displayed or may be displayed briefly, not blinking! If you do not see this indication can you enter the BIOS Setup and check from there? Unfortunately, the Asus site gives a manual with no information on the use of the BIOS. You need to look for a message from depression F key at boot time (usually F2 or Del but I saw others also). When you press this button, you should get in the pages of the BIOS settings. Look for the amount of memory installed. Exit BIOS without saving the changes, just in case you accidentally change a setting.

  Tricky

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• Satellite L650-14F - Windows 7 I need to install?

  Little help? If I install the 32-bit version of windows 7, all the RAM will be shown as windows xp 32-bit?

  Hey Korn,

  The amount of RAM you have installed right now?

  Windows 7 32 bit will also detect the same memory Windows XP 32-bit, but way General OS 32-bit can handle just 3.2 GB so if you have 4 GB or more RAM installed, you cannot use the entire capacity.

  But you are right, Windows 7 32-bit and 32-bit Windows XP detects the same RAM.

• How to get the amount of memory installed?

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Well, it does not resemble the Memstats VI returns the memory installed. It returns a number, but I can't match the amount of memory installed on my system. The GetCurrentPlatform seems to return only the name of the OS, not whether 32-bit or 64-bit. I see nothing in the App-> target list containing this information. At least to 8.2. Did not check in 2009.

  Altenbach says:

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Define "better". Best in speed? Better compatibility on multiple versions of the Windows operating system? Best in terms of access to this information without having to delve too in all sorts of types of data Windows and DLLs?

  Would you consider .NET stand for the 'best '. If so, the amount of RAM installed can be gained from easily using the Microsoft.VisualBasic.Devices.ComputerInfo class:

  

  To determine whether your OS is 32 - bit or 64 - bit are you trying to make a distinction between a 32 bit on a 64-bit CPU vs OS a 64 bits on 64-bit OS? I know that the WMI class can be used to obtain this information, so if you try to make this distinction, you could watch the Win32_ComputerSystem and Win32_Processor classes. For example, I think that what follows is what you would see:

  OS 64-bit on x64processor:
  Win32_ComputerSystem.systemType = pc x 64
  Win32_Processor.addresswidth = 64
  Win32_Processor.architecture = 9
  Win32_Processor.DataWidth = 64

  32 bit on x86processor OS:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 0
  Win32_Processor.DataWidth = 32

  OS 32 bit on x64processor:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 9
  Win32_Processor. DataWidth = 64

  I've attached an example on how to access the classes with .NET. Not pretty, but not too bad either.

• Windows Update keeps wanting to install "Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2618444).

  Windows Update keeps wanting to install "Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2618444)", even if it appears in the list of updates to inistalled in the control panel.  The installation fails.  When I use "Fix it", it indicates that default Windows update data locations have changed, but I can't 'Fix It' to do the repair.  In what could be a related issue, Windows Data Execution Prevention (part of IE 8?) detects a malfunctioning or malicious add-on, whenever I try to access a video on ESPN3 and closes the Web page.  However, 'Fix It' can not detect any problems with the modules.  I don't know what else to try to fix any of these problems.

  Bob

  Problems with the update of security of Internet Explorer (KB2618444)

  Hello
  You can check this link:
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339
  You can also try this link:
  http://support.Microsoft.com/kb/883256

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• I get a message saying that windows has detected another computer on this network. I have another computer could be this one

  I get the message windows has detected another computer on this network.i have another computer could be this one and is it a problem?

  Hello

  1 have you added the other computer on the network?

  2 have you made changes on the computer before this problem?

  3. When do you have this error code or error message?

  The computer has detected in the network may be the other that you have, you will need to check the network and check the name of the computer. I would suggest trying the following methods and check if it helps.

  Method 1:
  You can get a new IP address from your computer. You will need to do if you encounter connection problems.

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  c. enough at the command prompt ipconfig and press ENTER. This frees up your current IP address.

  d. ipconfig / renew in command prompt and press ENTER.

  The DHCP configuration for all adapters is renewed. To renew the IP address for a
  specific adapter, type the name of the map that appears when you type ipconfig at the command prompt.

   

  Method 2:
  If the problem persists and you have not Windows Vista Service Pack installed then you can refer to the link below and check if you use the fix passes solve you the problem.

  http://support.Microsoft.com/kb/948363

  Hope the information is useful.

• Windows 7 Windows is low on memory

  Hi, I'm running A Dell Inspiron laptop. Pentium CPU at 2.20 Ghz with 3 GB of Ram. Operating system is Windows 7 Home premium 64-bit with service pack 1. These last two days I get the error warning "Windows is low on memory." I looked at the performance tab in the Task Manager and even with closed programs, memory was raised near 97%. I tried to change the page file size which I do not know if I did it with the correct parameters. I also tried to uninstall programs to free up space on the hard disk. I tried safe mode with network and memory in the corresponding mode was only 27% I am trying to register all relevant information. I always face the problem though. I can't afford to support. Can someone advise me please what to do to get more virtual memory? What steps to take? Any help would be greatly appreciated.

  That's a lot to support a good swap file. I suggest that you set to allow Windows to manage the size, especially if you do not know how else better to adjust.

  With a proper file error is rare. This may indicate a problem program consumes excessive RAM or malware problem.  I suggest that you look at the processes tab in the Task Manager first. Sort on the column of the memory.  What are the rare albums?

  Also, check your computer for malware.  In addition to your antivirus program I suggest you run these good free programs.

  TDSS Killer
  http://support.Kaspersky.com/5353?El=88446

  By downloading and installing these be sure to get the free version. Say no
  for all offers free trial or the auto update during installation to keep the functional free version.

  Malwarebytes
  http://www.Malwarebytes.org/products/malwarebytes_free/

  SUPERAntiSpyware
  http://www.SUPERAntiSpyware.com/

• Windows poster 8 gigs Ram installed (2.65 available)

  Windows poster 8 gigs Ram installed (2.65 available)

  How can I get windows to display 8 GB available?

  OK first off you run 32-bit software and 64-bit if your running an operating system 32 bit Windows entirely will not use more then 4 GB of RAM and it will use the rest for your videosubsystems or disk cache memory.

  So the windows to display all of the eight gigabytes of memory to live, it must be a 64-bit operating system.
  You can see which version of Windows your race in the screen of the system in Control Panel.

• Windows 7 detects the wireless connection but cannot connect (3Com® OfficeConnect® Wireless 54 Mbps 11g Access Point Prod. #3CRWE454G75)

  Dear Microsoft,

  I appreciate all help to fix the inability of my brand new HP G42 notebook with Windows 7 to connect to my home wireless network.

  While I am able to surf the net, cable connection, for the last 4 days and an estimated total more than 20 hours - man, I tried several suggested solution round online to solve this problem, but to no avail so far.

  Windows 7 detects my wireless (WEP security OPEN) but simply could not connect.

  Meanwhile, Dell Latitde 630 my husband w / Windows XP Pro and Mac Book of dauther work very well.

  Thanks in advance for your help.

  LM

   

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Initially, I have will increase temporarily the computer to a place close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  To ensure that if there are Wireless Utility the utility a seller is not running with the native Windows wireless utility .

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When work turn the security on the wireless and take the computer back to its original location.

  Jack MVP-networking. EZLAN.NET

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• security issue: "Windows has detected the Zeus virus."

  My MacBook Pro displays a popup indicating that Windows (Yes, Windows) has detected the Zeus virus on my computer and suggested that I call a phone number provided immediately.  Obviously some scareware.

  How to clean my MacBook.  I don't see anything on the web Support pages.

  Thank you

  Mike T IS

  This kind of message is a scam. Do not meet these messages.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

  Phony 'technical support' / 'ransomware' popups and web pages

• Satellite 1700: Windows cannot detect the CD Rom drive

  CD drive on my laptop Satellite 1700 working under Windows. Windows cannot detect, but it works very well in mode cd player.

  Hello

  I have a question.
  Your drive is missing from the 'My computer' zone or the Device Manager displays a disk error?

  If the drive can be recognized in the BIOS, so I guess that the entries in the Windows registry are damaged or not right.
  I found this Microsoft Knowledge base and I think he should solve your problem.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please check and after if it succeeded.

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)