Windows 7 display setting

Similar Questions

• How to set up 4K with Windows 7 displays

  I recently bought a 4K display for the editing of images and video of 4K. Everything looks great except for two issues.

  1. even with the text of 150% scale, many air applications is too small or the correct size but upscaled and blurred.

  2 - I have my old DVi as my second display set up, but I don't want to have the text of 150% scaling because

  now, everything on that seems too big.

  Is it possible to apply different text scaling at every exit of the screen, just as you can set different resolutions? It seems stupid

  to force the two screens to have the same attributes, when they have completely different resolutions.

  If I get a second graphics card for the display of old, I still see the problem even if I turn on the text magnification 150%

  on the 4 k displays the map? It seems that this setting is global.

  Thanks in advance.

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  Windows allows you to use the scale to increase the size of text and other items on the screen. When you use the scale in this way, Windows allows to enlarge the size of the text and elements of the UI(User Interface) to the scale you choose. Each account on a computer has a separate for the scaling setting.

  I suggest you try using the steps described in this article and check if it helps.

  Reference:
  Optimize the scaling of display and difficulty of the scale of the problems under Windows 7
  http://TechNet.Microsoft.com/en-us/magazine/ff629368.aspx

  See also:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• display setting

  is there a way to set the contrast of my g6 hp laptop? brightness and contrast too

  Hi kingkaleed,

  I understand you have brightness or contrast issues. I'd love to help you, but it is necessary to get more details to help you properly. More details about your product as the product number and the version of the OS. Please see the following documents if you need help to find out who.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  As a first step, here are a few documents from HP that I found that can be useful related to problems of brightness:

  The problems with the brightness of the screen

  The display is Dim during or after the boot or startup

  Here are a few other HP sources I found who can also be useful for you.
  Problems related to laptop (Windows 7 and Windows 8) displays

  This page is more informative on the screens, for your reference.
  On the defects of the LCD and the terminology for HP Pavilion and Compaq Presario Notebook PC

  Let me know if this has been helpful for you, or if you need assistance most.

  Kind regards

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• How can I get the indicator private Window to display?

  When you select new private window I don't see the indicator with the purple icon on the upper side right of the window. I have Firefox at work and when I open a new private window, it displays a purple icon on top of my new window, at home I do not see that.

  Thank you guys, by adding the extension to disable the navigation and adds the extension of the private LAN tab took care of my question, now, when a private tab is open I can see the purple mask flag.

• Windows could not set up to run on the hardware on this computer.

  After getting a new hardrive, I used the recovery disks. Once the three discs are finished, it goes to "Please wait while Windows continues to set up your computer" then a few minutes later it rises, "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. Is there a way to correct this error without lose more money?

  Hello:

  Try to make your own Vista installation disc and see if you can get Vista installed in this way.

  If you are in a fault light but rewarding, you can make your own Vista installation DVD so you can read your Vista on the PC 25-character product key.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  Original title: security settings

  My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  How can I solve this problem

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the full error you get, when you try to activate windows Defender?
  4. what anti-virus is installed on the computer?
  
  Method 1: Check if the Windows Defender service is enabled.
  a: Type Services.msc in the start search box and click on enter.
  b : now, look for a service called Windows Defender, double-click to open it.
  c: Now Start the service and make sure that it is set to automatic.
  
  Method 2: Temporarily disable the antivirus and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
  Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.
  
  Hope this information helps.

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.