Windows could not set up to run on the hardware on this computer.

Similar Questions

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• TouchSmart 600: windows Setup could not configure windows to run on a hardware on this computer

  I had a Touchsmart 600-1120 Windows 7, don't know if it's 32-bit or 64-bit. I had to replace the hard drive and I bought a Seagate st2000dx001-1ns164 model. After installing the new drive, I used the recovery disks, but when the pc reboots I get the following message: "windows could not setup configure windows to run on a hardware on this computer."  Are there new drivers I need to install and if so, where can I find the?

  Thank you.

  I suspect that the reason for the 2 TB drive vs the 750 GB drive that was there.  All of the recovery check the hardware on the PC which is used and rejects the hardware changes if it differs too.  I don't know a way around this limitation.  I suspect that a copy of Windows 7 retail install OK but then you have all the drivers, FOUND HERE.

  Another way would be to get a new 750 GB drive to replace the original failed drive.

• Windows could not set the offline locale information. Error code: 0x80FE0000

  Windows could not set the offline locale information. Error code: 0x80FE0000

  Handsome,

  Found that I got the same error (0x80fe0000) while trying to reinstall Windows Vista, Service Pack 1 on a Dell Inspiron 1545. Originally, the BSOD's happened and repair Windows has been in vain. Formatting the drive did not resolve the issue

  Replace the player has solved this problem for me. It seems that the disc has been/is damaged and would fail to resettlement.

  time of installation of $60 later and two hours and everything is fine.

  I hope this helps!

  DrMardo

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• "Installation of Windows could not configure windows to run on a hardware on this computer."

  I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

  First of all, then someone please help me get windows installed on my raid?

  Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

  EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

  Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

  (1) check each drive individually for issues.

  (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

  Windows 7 cannot complete installation, halfway, it stops and gives me the message

  "windows Setup could not configure windows to run on a hardware on this computer.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.

• Windows could not search for new updates after the troubleshooting and repair of updates

  My computer Windows 8 began to refuse to install windows updates.  I've been through the troubleshooting steps in Help and online.

  Now, what I mean is "Windows could not search for new updates", code 80073712.

  Troubleshooting Windows Update tool, solve problems as an administrator, gives:

  Error Windows Update Database that can be detected 0 x 80073712... Fixed.

  Windows Update components and need to be repaired... Fixed.

  I'm skeptical about the 'Fixed' part, because if you run it again... he finds and it 'fixed' the same problem.

  DISM.exe/online/Cleanup-image /Restorehealth and /scanhealth the two report error 14098: component store has been corrupted.

  Feel free to ask me questions to debug it, I'm fairly technical...

  Hello

  You can try this fix based on Windows PowerShell and see if that helps:

  http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates

  Hope this helps, good luck :)

• Windows could not set up, returning from changes, do not restart computer

  I have an Asus Q400A laptop which came with window 8.  I had to do a reset of the laptop and he was advised to update Windows before reloading all the apps.  I did and the computer has now been blocked for hours "Windows doesn't have not set, coming back from changes, do a computer restart.

  Can it be resolved, or if the computer is ruined?

  Original title: failure of confirgure after the update froze my computer

  When you start your computer by using the Windows installation disc, you can run recovery system at boot options. To do this, follow these steps:

  Note If your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue...

  Ref: http://support.microsoft.com/kb/949358

• Help to replace hard drives, when I tried to reinstall windows 7 Ultimate I get message that "Windows Setup could not configure Windows to run on a hardware on this computer.

  Nick Cannon

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows error: 0x8007007B; The file name, directory name or volume label syntax is incorrect. Topic: Windows could not be activated. I have the keys.

  I have the keys for all of my products to Windows, but this option was not for me.

  I don't know what that means.  Please someone help!

  Thank you in advance, my name is Heather

  Edit: Thanks for the responses, very helpful.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once saved, run the tool.

  Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  -in your own thread, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

  http://www.Microsoft.com/en-us/howtotell/hardware.aspx